DANFOSS BFP 21R3 Burner Oil Pump 071N0109

1. Pendahuluan

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the DANFOSS BFP 21R3 Burner Oil Pump, model number 071N0109. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

Gambar 1: Umum view of the DANFOSS BFP 21R3 Burner Oil Pump.

2. Informasi Keselamatan

Always observe general safety precautions when working with fuel systems and electrical components. Failure to follow these instructions may result in property damage, serious injury, or death.

• Ensure the power supply to the burner system is disconnected before installation, maintenance, or troubleshooting.
• Kenakan alat pelindung diri (APD) yang sesuai, termasuk sarung tangan dan pelindung mata.
• Handle fuel with care. Fuel is flammable and can cause skin irritation.
• Pemasangan dan servis hanya boleh dilakukan oleh personel yang berkualifikasi.
• Check for leaks after installation and before operating the system.
• Do not modify the pump or its components. Use only genuine DANFOSS replacement parts.

3. Produk Lebihview

The DANFOSS BFP 21R3 is a compact burner oil pump designed for use in oil burner systems. It is engineered for reliable fuel delivery and pressure regulation. The pump features a robust metal construction and is suitable for industrial applications.

Gambar 2: Sisi view of the pump, highlighting the 'P' (pressure) and 'V' (return) ports, and model identification.

Fitur utama meliputi:

• Model: BFP 21R3
• Nomor Bagian: Nomor telepon 071N0109
• Bahan: Logam
• Warna: Hitam
• Aplikasi: Burner Oil Systems

Gambar 3: Atas view of the pump, showing the electrical connector for power supply.

4. Pengaturan dan Instalasi

Proper installation is crucial for the pump's performance and longevity. Refer to your burner manufacturer's instructions for specific mounting requirements.

4.1 Pemasangan

• Mount the pump securely to the burner motor or a stable surface using appropriate fasteners.
• Ensure the pump shaft aligns correctly with the motor coupling.

Gambar 4: Bawah view of the pump, illustrating the drive shaft and mounting screw locations.

4.2 Fuel Line Connections

Connect the fuel lines as follows:

1. Inlet (Suction) Line: Connect the fuel supply line to the designated inlet port. Ensure a tight, leak-free connection.
2. Nozzle Line (Pressure): Connect the line leading to the burner nozzle to the pressure port (marked 'P' on some models).
3. Jalur Kembali: If applicable, connect the return line to the return port (marked 'V' on some models) to send excess fuel back to the tank. For single-pipe systems, the return port must be plugged.

4.3 Sambungan Listrik

Connect the pump's electrical terminals to the burner control system according to the burner manufacturer's wiring diagram. Ensure correct voltage and polarity. All electrical work must comply with local codes and regulations.

4.4 Priming Pompa

After installation, the pump must be primed to remove air from the fuel lines. This is typically done by running the burner for a short period until a steady flame is established. Some pumps may have a bleed screw for manual air removal.

5. Petunjuk Pengoperasian

Once installed and primed, the DANFOSS BFP 21R3 pump operates automatically in conjunction with the burner control system. The pump maintains the required fuel pressure for efficient combustion.

5.1 Penyesuaian Tekanan

The pump's pressure can be adjusted via a pressure regulating screw, typically located on the pump body. Use a pressure gauge to set the desired operating pressure as specified by the burner manufacturer. Turn the screw clockwise to increase pressure and counter-clockwise to decrease pressure.

6. Pemeliharaan

Regular maintenance ensures optimal performance and extends the life of the pump.

6.1 Pemeriksaan Rutin

• Inspect fuel lines for leaks, cracks, or damage.
• Periksa kekencangan sambungan listrik dan korosi.
• Listen for unusual noises during operation, which may indicate a problem.

6.2 Penggantian Filter

The pump typically contains an internal filter that should be inspected and replaced periodically, usually annually or as recommended by the burner manufacturer. A clogged filter can restrict fuel flow and reduce pump performance.

Figure 5: Close-up of the pump's drive shaft, which connects to the motor.

7. Penyelesaian masalah

This section outlines common issues and potential solutions. Always disconnect power before performing any troubleshooting steps.

8. Spesifikasi

9. Garansi dan Dukungan

For warranty information or technical support, please contact your authorized DANFOSS dealer or the seller from whom the product was purchased. Keep your proof of purchase for warranty claims.