ICOMTEC 702K-AS-HC Generator Control Panel
Description
The DSE702 Generator Controller offers an excellent range of engine monitoring and protection features. The Generator Manual Start Control offers inputs to monitor low oil pressure, high engine temperature and overspeed and the manual start version also has a user-defined auxiliary input. Auto Start versions also include an input option for a start signal from a remote location. When the Generator Manual Control detects any of the above faults it will light the warning LED on the front panel.
Features
- Manual start and remote start versions.
- Remote start input (auto start version only)
- Engine monitoring and protection.
- LED indication
- Engine pre-heat
- Front panel mounting.
Specifications
DC Provide:
- CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous - CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing provide was at least 10 V before dropout and provide
recovers to 5 V. This is achieved without the need for internal batteries.
Outputs of DSE702:
- START
Solid state 1.2 A negative grounding terminal - RUN
Solid state 1.2 A negative grounding terminal - PRE-HEAT
Solid state 1.2 A negative grounding terminal
Generator:
- VOLTAGE RANGE
15 V – 333 V AC (L-N) - FREQUENCY RANGE
3.5 Hz to 75 Hz
Dimensions:
- OVERALL
72 mm x 72 mm x 38 mm
2.8” x 2.8” x 1.5” Excludes key switch - PANEL CUT-OUT
68 mm x 68 mm 2.7” x 2.7” - MAXIMUM PANEL THICKNESS
8 mm
Documents / Resources
 |
ICOMTEC 702K-AS-HC Generator Control Panel [pdf] User Manual 702K-AS-HC, Generator Control Panel, 702K-AS-HC Generator Control Panel, Control Panel, Panel |
