ICETRO IM-0350-AC-IM-0350-AH Maestro Modular Ice Maker Cube Style

ICETRO IM-0350-AC-IM-0350-AH Maestro Modular Ice Maker Cube Style

Ice Shape

  • Half Cube
    3/8″ x 1/8″ x 7/8″.
    (.95 x 2.86 x 2.22 cm)
    Ice Shape
  • Cube
    7/8″ x 7/8″ x 7/8″
    (2.22 x 2.22 x 2.22 cm)
    Ice Shape

Factory Warranty

  • Ice Maker
    Parts &
    Factory Warranty
  • Evaporator
    Labor
    Factory Warranty
  • Compressor
    Parts
    Factory Warranty

Factory Warranty Extend ice machine warranty 1 year by installing an Ice Pro 400 with ice machine.

* Applies only to new ice machines, at the time of original installation & start-up.

Accessories

Bin-Stat Kit IBO-150KIT

Recommended when ice machine is installed on soda dispenser.
Accessories

Water Filtration Ice Pro 400

Reduces sediment and chlorine contaminants with the use of Citrine.
Accessories

  • Up to 367 lbs production capacity (70F/50F, 24 Hours)
  • 304 stainless-steel exterior (durable & rust-resistant)
  • Simple diagnostic panel to assist service & maintenance
  • Cleaning switch for auto cleaning cycle
  • Magnetic frame cleanable condenser air filters
  • Adjustable flush time to reduce scale & cleaning cost
  • ABS antimicrobial interior to reduce slime & cleaning cost
  • Water distributor tube & water sump removed w/o tools
  • Heavy duty water curtain, pins & hangers for easy removal
  • Hinged front doors for easy access
  • No screws on side or back panels for easy access
  • Sides & top vents for optimal ventilation
  • Improved evaporator section to reduce airborne bacteria
  • Power cord with NEMA 5-15 plug
  • R-404A refrigerant

Specifications

BTU Per Hour: 5,325

Refrigerant: R404A

  • Ambient Temperature Range: 50 to 100 F (10 to 37 C)
  • Water Temperature Range: 50 to 90 F (10 to 32 C)
  • Potable Water Pressure: Min. 20 psi (137.9 kPA) Max. 80 psi (551.1 kPA)
  • Condenser Water Pressure: Min. 20 psi (1.38 bar) Max. 150 psi (10.34 bar)

Ice Machine Electric

115/60/1

Minimum circuit ampacity:

Air-cooled: 15 1ph

Maximum fuse size:

Air-cooled: 20 1ph

Dimension

IM-0350 Air Cooled 

  • FRONT VIEW
    Dimension
  • SIDE VIEW
    Dimension
  • BACK VIEW
    Dimension

Specifications

Dimensions Width Depth Height Weight
IM-0350 Machine 30″ 24.8″ 22.6″ 152.1 lbs (Net) 171 lbs (Shipping)
Model Ice Shape Ice Production 24 Hours Power Usage kWh/100 lbs. @90°Air/70°F Potable Water Usage/ 100 lbs. 45.4 kgs. of Ice
70°Air/ 50°F Water 90°Air/ 70°F Water
1 ph 1 ph 1
AIR COOLED IM-0350-AC

cube
Ice Shape

367 lbs 304 lbs 6.25 15 Gal.
166 kgs 138 kgs 15 Gal.
IM-0350-AH

half-cube
Ice Shape

367 lbs 304 lbs 6.25 15 Gal.
166 kgs 138 kgs 15 Gal.

Customer Support

QR CodeIcetro America, Inc. – 1202 W Struck Ave, Orange, CA 92867
– 6432 Warren Dr, Norcross, GA 30093
Phone 714-215-4864
Phone 470-567-8603
www.IcetroAmerica.com SymbolsLogo

Documents / Resources

ICETRO IM-0350-AC-IM-0350-AH Maestro Modular Ice Maker Cube Style [pdf] Owner's Manual
IM-0350-AC, IM-0350-AH, IM-0350-AC-IM-0350-AH Maestro Modular Ice Maker Cube Style, IM-0350-AC-IM-0350-AH, Maestro Modular Ice Maker Cube Style, Modular Ice Maker Cube Style, Ice Maker Cube Style, Maker Cube Style, Cube Style

References

Leave a comment

Your email address will not be published. Required fields are marked *