i-PRO WV-X15 AI-VMD AI Video Motion Detection

Install Various types of applications to keep your i-PRO network camera on the cutting edge.

There are many types of AI applications that can be installed on network cameras at no additional cost. Although i-PRO network cameras are edge devices, they are in charge of various detection processes. As a result, the camera is responsible for the advanced processing and the server does not require expensive hardware.

i-PRO AI applications 

AI Video Motion Detection (AI-VMD)

• AI differentiates between vehicles, motorcycles, bicycles, and people. It further detects and sends warning notifications when they enter a specified area. It can also count the number of times the target object crosses line.
• Intruders
  It is possible to issue an alarm when a moving object enters a specified area.
  
• Loitering
  It is possible to issue an alarm when a moving object enters a specified area and stays there for a specified amount of time.
  
• Direction
  It is possible to issue an alarm when a moving object enters a specified area and moves in the specified direction.
  
• Cross line
  It is possible to issue an alarm when an object moving in the specified direction crosses a specified threshold.
  

AI On-site Learning

• AI On-site Learning allows to enhance AI analysis by adding target object and improving accuracy. You can add customized objects to detect using on-site camera footage through simple learning process. In addition, it contributes to reduce missed/false alarms by training based on the past footage.
  

  Supported camera	WV-X15xxx, WV-X22xxx, WV-X25xxx (New X series Camera) Note: To be used with AI-VMD
  SD card	Not required
  No. of learning images required	10 – 200 images
  No. of target to be added	Up to 5 targets Note: Additional targets can be detected simultaneously

• For learning process, collecting images and manual operations to teach the correct target are required. Also, detection
  performance depends on the learning results and the environments you use. Be sure to check the operation at the installation site.
• For configuration (detection area etc.), please use the latest version of i-PRO configuration tool (iCT).

AI Privacy Guard

• To protect privacy and portrait rights, it is possible to automatically apply a mosaic the entire face and figure of a person captured by the camera.
  
  

Privacy Guard target	Face, Human, Except face, Except human, All Except face, Except human, All” are available with the firmware released in February 2024 or later
Stream	Stream(1), Stream(2), Stream(3), Stream(4), Stream(2)&(4)
Masking method	Blurring, Filling

AI Sound Classification

• AI detects and identifies (gunshot / yell / vehicle horn / glass break) sound. It then sends a warning notification according to the sound identified.
• Gunshot
  
• Vehicle horn
  
• Yell
  
• Glass break
  

  Classification target	Gunshot Yell Vehicle horn Glass break
  Classification condition	Target sound is 6 dB louder than crowd. Target sound continues more than a second. (except for gunshot)

  External microphone is required.
• Frequency characteristics: support 200 Hz to 8 kHz, Omnidirectional microphone.

AI Face Detection

• The i-PRO network camera utilizing an AI engine and i-PRO Active Guard realize real-time face recognition without an expensive face recognition server. AI detection enables highly accurate face detection, and is also effective for detection in low lighting, backlit environments, or for detecting faces obscured by masks.
  
  

Range of angle	Horizontal: 0° – 45°, Vertical: 0° – 30°
Detection number at the same time	Max. 8 faces
Size of face image	Min. size: width 30 pix Recommend: 60 pix
Min. illumination level	100 lux
Max. number of cameras	20 when installed with VMS server PC 60 when installed in dedicated server PC
Max. number of watchlist	1,000 faces
Recommended model	WV-S1136, WV-S1536LTN, WV-S2536LTN

AI People Detection

• Characteristics of the human face and clothing are extracted and classified into useful categories such as gender, age, and clothing color. This abundant attribute information can then be searched to easily find the target person.
  

  Attributes	Values
  Gender	Male / Female
  Age	Child (0-10) / Young Adult (11-20) / Adult (21-60) / Senior (61+)
  Mask	Mask / No Mask
  Hair type	Long hair / Short hair / Hat
  Hair color	Black / Brown / White / Gray / Gold
  Sunglasses	Sunglass / No Sunglasses
  Beard	Beard / No Beard
  Top type	Long sleeves / Short sleeves
  Top color	Black / Brown / White / Gray / Green / Red / Blue / Yellow / Orange / Purple / Pink
  Bottom type	Long / Short
  Bottom color	Black / Brown / White / Gray / Green / Red / Blue / Yellow / Orange / Purple / Pink
  Bag	Bag / No Bag
  Bag color	Black / Brown / White / Green / Red / Blue / Yellow / Orange / Purple / Pink
  Shoes color	Black / Brown / White / Green / Red / Blue / Yellow

  Conditions	Range of angle	Vertical: 0° to 45°
  	Detection number at the same time	Max. 20 people
  	Size of people image	Min. size: width 60 pix Recommended size : width 100 pix
  	Min. illumination level	Min. illumination level : 10 lux Recommended illumination level : 50 lux
  Mask Area (non-detection area)		Max. 8 areas (polygonal) can be set

  
• Mask
  
• Beard
  
• Hat
  
• Sunglass
  

AI Vehicle Detection

• Vehicle characteristics are extracted and classified into useful categories such as type and color. This abundant attribute information can then be searched to easily find the target vehicle.
  

  Vehicle Type
  Truck
  Bus
  SUV
  Van
  Sedan
  Pickup Truck
  Two-Wheel

  Vehicle Color
  Black
  Brown
  White
  Gray
  Red
  Blue
  Yellow
  Green
  Purple
  Pink

Conditions	Range of angle	Vertical: 0° to 90°
	Detection number at the same time	Max. 20 vehicle
	Size of vehicle image	Min. size: 70 pix for the shorter axis (about 15-20 m ahead) Recommended size: 112 pix for the shorter axis
	Min. illumination level	5 lux
Mask Area (non-detection area)		Max. 8 areas (polygonal) can be set

AI Occupancy Detection

• It counts the number of people in a specified area and issues an alarm when the number exceeds a specified threshold. Information of the number of people in the area can be output externally via HTTP or MQTT.
  
• Example image of detection processing.

Size of people image	Min. size: width 64 pixel (in case of S series 2MP model)
Detectable angle of view	Vertical: 0° to 45°
Max. number to detect at the same time	Max. 40 people
Detection Area	Max. 4 areas (polygonal)
Number of people to detect	1 to 40 people/area
Detection time	1 to 600 sec/area
Recommended location to install	Indoor
Min. illuminance	50 lux

AI Scene Change Detection

• It can define/learn the normal scene for each camera and output an alarm when it is determined to be abnormal.
• Left behind object
  If the normal status is an empty area, the application will notify you when a stationary object is left behind.
  
• Door movement
  If the normal status is a closed door, the application will notify you when the door is left open for a defined period of time.
  
• Parking vacancy
  If the normal status for a spot is set to “occupied”, the application will notify you when the spot is vacant.
  
• Out-of-stock product
  If the normal status is set to “full shelf”, the application will notify you when the shelf is empty or low, as defined.
  

Scene Change judgment method	The user trains the app with multiple images of normal scenes, and the app monitors the amount of pixel change from the trained images. It issues an alarm when the amount of pixel change exceeds a threshold for a specified time period.
Recommended location to install	Indoor
SD Memory Card	Required
Detection size	5% or more of the width of the angle of view
Detection Area	Max. 16 areas (quadrilateral)
Detection time	2 to 3600 sec/area

AI Processing Relay

• It can be used when you want to add an AI function to an already installed camera. This software receives MJPEG data from other cameras, performs AI processing with AI Extension Software, and performs alarm reception and image search with i-PRO Active Guard.
  

  		WV-S71300-F3 (i-PRO Mini) Note : Camera function on install camera is not available.	WV-X15xxx, WV-X22xxx, WV-X25xxx (New X series Camera) Note: Camera function is available.
  Input		1 ch	3ch
  No. of apps to be installed		Up to 2 apps	Up to 3 apps*1
  Supported camera		i-PRO camera Other Company Camera Note : The camera must be able to output 1920×1080 or 1280×720 JPEG at 5fps. And you need to know JPEG Stream CGI and input it on “AI Processing Relay app”
  Received video format	Video format	JPEG
  	Frame rate	Min. frame rate：3 fps Recommended frame rate: 5 fps
  	Resolution	1920×1080 or 1280×720
  Available AI app		AI-VMD / AI People Detection / AI Vehicle Detection / AI Occupancy Detection / AI Scene Change Detection Note : The AI analysis performance depends on the image quality, so it will be a best effort. Please check it with cameras you use on site.
  Supported System		Video Insight / Genetec / Milestone / ASM300 with i-PRO Active Guard Note : For “ASM300 with i-PRO Active Guard” supports only i-PRO cameras. For “Genetec / Milestone with i-PRO Active Guard”, AI-VMD / AI Occupancy Detection alarms are not supported because they do not go through i-PRO Active Guard. For “Video Insight with i-PRO Active Guard”, AI Occupancy Detection alarms are not supported because they do not go through i-PRO Active Guard.

  1 For more details, refer AI apps compatibility in Accessory Selector( https://i-pro.com/selector/accessory/ ) or the Technical Information [C0103] (https://i pro.com/products_and_solutions/en/surveillance/learning-and-support/knowledge-base/technical information)

AI-VMD/AI People Counting for 360-degree fisheye camera 

AI Video Motion Detection

• AI differentiates between vehicles and people, detecting and sending warning notifications when an intruder enters a specified area.
• Heat mapping provides statistical information about traffic flow and keeps counts for people passing through and loitering in the area.
• Intruder detection:
  Issues an alarm when a moving object enters a specified area.
• Cross Line detection:
  Issues an alarm when an object moving in the specified direction crosses a specified threshold.
• Loitering detection:
  Issues an alarm when a moving object enters a specified area and stays there for a specified amount of time.
  

Heat map

• Heat mapping provides statistical information about traffic flow and keeps counts for people passing through and loitering in the area.
• Passing
  
• Loitering
  

People Counting

• Cross Line Counting:
  Counts the number of people moving in a specified direction and cross a specified threshold.
• Area Counting(Queue Management):
  Counts the number of people in the set area.
• Cross Line Counting
  
  
• Area Counting
  

Occupancy detection

• The network camera uses its AI engine to detect congestion, providing data that can be used to direct visitor traffic flow in advance or help staff work more efficiently.
  

AI Privacy Guard for 360-degree fisheye camera 

AI Privacy Guard

• AI can automatically mosaic faces and figures of people who are photographed to safeguard privacy and portrait rights.
• Original image
  
• Processed image
  

i-PRO Active Guard

• The i-PRO Active Guard stores the best images and metadata captured by i-PRO network cameras, then collates this data with the watch list registered in the client software and issues an alarm when a match is found. The server does not require expensive hardware because i-PRO network cameras handle the advanced processing. The server can even be installed on the same hardware as the VMS. The system comprises the i-PRO Active Guard, the AI application installed on i-PRO network cameras utilizing AI engines, and i-PRO Active Guard Plug-in software for the VMS client.
  Example of a basic system connection
  

Specification

		Video Insight system	Genetec system	Milestone system	WV-ASM300W / Network disk recorder system
Scale	Supported camera	i-PRO network camera with AI engine
	Number of camera	1 to 100 CH when installed with VMS server (AI Face Detection is up to 20) 1 to 300CH when installed in dedicated server (AI Face Detection is up to 60)		1 to 300CH when installed in dedicated server (AI Face Detection is up to 60)	1 to 4CH when installed with WV-ASM300W (AI Face Detection is up to 4) 1 to 300CH when installed in dedicated server (AI Face Detection is up to 60)
	Number of client	No limitation (depending on limitation of VMS)
	Number of Recording server	12 VI IP servers	– (only main server should be registered)	– (Management server should be registered)	12 Network disk recorders
	Number of i-PRO Active Guard server per a client	No limitation (depending on capability of whole system)			100
Supported AI applications	For plugin	AI-VMD / AI Sound Classification / AI Face Detection / AI People Detection / AI Vehicle Detection / AI Scene Change Detection / AI On-site Learning / Vaxtor ALPR, Vaxtor ALPR MMC	AI Face Detection / AI People Detection / AI Vehicle Detection / AI On-site Learning Vaxtor ALPR, Vaxtor ALPR MMC	AI Face Detection / AI People Detection / AI Vehicle Detection	AI-VMD / AI Sound Classification / AI Face Detection / AI People Detection / AI Vehicle Detection / AI Scene change detection / AI Occupancy Detection / AI On-site Learning / Vaxtor ALPR, Vaxtor ALPR MMC
	For dashboard	AI Face Detection, AI People Detection, AI Vehicle Detection, AI-VMD/ AI People Counting for 360-degree fisheye camera, AI-VMD, AI Occupancy detection, AI On-site Learning, Vaxtor ALPR, Vaxtor ALPR MMC		AI Face Detection, AI People Detection, AI Vehicle Detection, AI-VMD/ AI People Counting for 360-degree fisheye camera, AI-VMD, AI Occupancy detection / AI On-site Learning / Vaxtor ALPR, Vaxtor ALPR MMC
Store	Retention period	Max. 31 days limitation for face, people or vehicle data / Max. 92 days limitation for people counting data Max. 366 days by upgrading SQL Server Standard edition or higher
Post Search	Filter	People, Vehicle (attribute, date & time, camera, moving direction) Face (similar face, date & time and camera) LPR (License plate number, country, vehicle type, color, brand, model, moving direction, date & time, camera)
	Similar search	People and vehicle (by same attribute information as detected ones), Face (search for similar faces), and LPR (license plate number)
	Sort	Descending, Ascending, Relevance (Face, People, Vehicle and LPR)
Alarm	Watch list alarm	Up to 1,000 faces, Up to 12 people attributes, Up to 12 vehicle attributes Up to 12 License plate group or attribute		Up to 1,000 faces, Up to 12 people attributes, Up to 12 vehicle attributes
	Detection alarm	AI Sound Classification (Gunshot / Yell / Vehicle horn / Glass break) AI-VMD (Intruder / Loitering / Direction / Line cross / On-site learning)/LPR, VCA, Access Control / AI Scene change detection	AI-VMD, AI Sound Classification and LPR are supported in Genetec Security Center and Security Desk (not plugin)	AI Scene change detection AI-VMD are supported in XProtect (not plug-in)	AI Sound Classification Gunshot / Yell / Vehicle horn / Glass break) AI-VMD (Intruder / Loitering / Direction / Line cross / On-site learning )/ AI Occupancy detection / AI Scene change detection
	Related function	Show alarm on real-time, Alarm search, VMS’s Rules configuration, Map overlay, Notification to mobile app, Manage alarm status			Alarm destination (plugin, camera, IO Unit or Custom HTTP) and alarm trigger can be configured.
Playback/ Export	Playback	Playback video around the time of the best shot on full and multi-view	Playback video around the time of the best shot on full screen
	Export video	Save best shot image, Export video from Recording server
	Export Search result	HTML and CSV	HTML	HTML	HTML and CSV
Dashboard	Supported browser	Microsoft Edge, Google Chrome and Firefox
	Chart	People counting, occupancy statistics and heatmap when using AI-VMD/AI People Counting for 360-degree fisheye camera. People counting, vehicle counting and on-site learning object counting when using AI-VMD. People counting and occupancy statistics when using AI Occupancy Detection. Data update interval is minimum 5 seconds for people/vehicle on-site learning object counting and 1 min for heat map. Age and gender statistics when using AI Face Detection. Data update interval is minimum 1 min.People attribute statistics when using AI People Detection. Data update interval is minimum 1 min. Vehicle attribute statistics when using AI Vehicle Detection. Data update interval is minimum 1 min. LPR counting when using LPR application. Data update interval is minimum 1 min.
	Customize	Contents, display size, location for each chart. 3 Layouts per user can be saved and 24 user can be registered. (Up to 4 user can be log-in at the same time) Basic display color theme (dark or light) Line chart type (Straight line / Smoothed line), line/area name for counting

System requirement 

		VMS	WV-ASM300
i-PRO Active Guard server installed in dedicated server Not support to install with Milestone XProtect	Up to 100 cameras Camera with AI Face Detection is up to 60.	Intel® Core™ i7-9700 (4.9 GHz, 8 core 8 thread) or better  32 GB of RAM or more  64 bit operating system Microsoft® Windows 10 Pro Microsoft® Windows 10 Enterprise Microsoft® Windows 10 Education Microsoft® Windows 10 Pro Education Microsoft® Windows 10 IoT Enterprise version 2004 or later Microsoft® Windows 11 Pro Microsoft® Windows 11 Enterprise Microsoft® Windows 11 Education Microsoft® Windows 11 Pro Education Microsoft® Windows 11 IoT Enterprise Microsoft® Windows Server 2016 Standard Microsoft® Windows Server 2019 Standard Microsoft® Windows Server 2022 Standard Microsoft® Windows Server 2016 Datacenter Microsoft® Windows Server 2019 Datacenter Microsoft® Windows Server 2022 Datacenter  GbE network interface card
	Up to 300 cameras *Camera with AI Face Detection is up to 60.	Intel® Xeon® Silver 4208 2.1 GHz (8 core 16 thread) or better  32 GB of RAM or more  64 bit operating system Microsoft® Windows Server 2016 Standard Microsoft® Windows Server 2019 Standard Microsoft® Windows Server 2022 Standard Microsoft® Windows Server 2016 Datacenter Microsoft® Windows Server 2019 Datacenter Microsoft® Windows Server 2022 Datacenter  GbE network interface card
i-PRO Active Guard server installed with VMS server	Up to 100 cameras	Intel® Xeon® Silver 4208 2.1 GHz (8 core 16 thread) or better  32 GB of RAM or more  64 bit operating system Microsoft® Windows Server 2016 Standard Microsoft® Windows Server 2019 Standard Microsoft® Windows Server 2022 Standard Microsoft® Windows Server 2016 Datacenter Microsoft® Windows Server 2019 Datacenter Microsoft® Windows Server 2022 Datacenter  GbE network interface card
i-PRO Active Guard server installed with ASM300	Up to 4 cameras		Intel® Core™ i7-10700 (4.8 GHz, 8 core 16 thread) or better  16 GB of RAM or more  64 bit operating system Microsoft® Windows 10 Pro version 20H2 or later, Microsoft® Windows 11 (64 bit)  GbE network interface card  Graphic: NVIDIA Quadro P1000, NVIDIA T1000

Trademarks and registered trademarks

•  All other trademarks identified herein are the property of their respective owners.

Important

• Safety Precautions : Carefully read the Basic Information, Installation Guide and Operating Instructions before using this product.
• i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers’ products used on the network.
• When monitoring remotely, please pay attention to the network design. For details, please contact your local i-PRO sales representatives.

All images are for illustrative purposes only. Specifications are subject to change without notice.

Customer Support

i-PRO Co., Ltd.
https://i-pro.com/

Documents / Resources

	i-PRO WV-X15 AI-VMD AI Video Motion Detection [pdf] User Guide WV-X15 AI-VMD AI Video Motion Detection, WV-X15, AI-VMD AI Video Motion Detection, AI Video Motion Detection, Video Motion Detection, Motion Detection
	i-PRO WV-X15 AI-VMD AI Video Motion Detection [pdf] User Manual WV-X15 AI-VMD AI Video Motion Detection, WV-X15 AI-VMD, AI Video Motion Detection, Video Motion Detection, Motion Detection

References

• User Manual