IP65 HF Motion Sensor with 5.0 SIG Mesh
HMW84 (High Bay)
Tri-level Control & Daylight Harvest for Independent DALI/DALI2
Product Description
HMW84 is a Bluetooth DALI high-bay HF motion sensor, with capability of up to 15m installation height. It is designed with robust IP65 structure, and offers 3 different installation methods. With Bluetooth wireless mesh networking, it makes communication much easier without any hardwiring, which eventually adds values to luminaires and saves costs for projects.
Meanwhile, simple device setup and commissioning can be done via koolmesh app.
App Features
 |
Quick setup mode & advanced setup mode |
| Tri-level control | |
| Daylight harvest | |
| Circadian rhythm (Human centric lighting) | |
| Floorplan feature to simplify project planning | |
| Web app/platform for dedicated project management | |
| Koolmesh Pro iPad version for on-site conguration | |
| Grouping luminaires via mesh network | |
| Scenes | |
| Detailed motion sensor settings | |
| Dusk/Dawn photocell (Twilight function) | |
| Push switch conguration | |
| Schedule to run scenes based on time and date | |
| Astro timer (sunrise and sunset) | |
| Staircase function (primary & secondary) | |
| Internet-of-Things (IoT) featured | |
| Device rmware update over-the-air (OTA) | |
| Device social relations check | |
| Bulk commissioning (copy and paste settings) | |
| Dynamic daylight harvest auto-adaptation | |
| Power-on status (memory against power loss) | |
| Ofine commissioning | |
| Different permission levels via authority management | |
| Network sharing via QR code or keycode | |
| Remote control via gateway support HBGW01 | |
| Interoperability with Hytronik Bluetooth product portfolio | |
| Compatible with EnOcean BLE switches | |
| Continuous development in progress… |
Hardware Features
 |
40mA DALI/DALI2 Broadcast output |
| 3 installation methods | |
| IP65 design | |
| High-bay (up to 15m height) | |
| 5-year warranty |
Web app/platform: www.iot.koolmesh.com
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Technical Data
| Input Characteristics | |
| Model No. | HMW84 |
| Mains voltage | 220~240VAC 50/60Hz |
| Stand-by power | <1W |
| Load ratings: | |
| Capacitive | 800VA |
| Resistive | 1000W |
| Warming-up | 20s |
| Safety and EMC | |
| EMC standard (EMC) | EN55015, EN61000-3-2/-3-3 |
| Safety standard (LVD) | EN60669-1, EN60669-2-1 |
| Radio Equipment (RED) | EN300440, EN301489-1/-17/-3, EN62479,EN300328 |
| Certification | CB, CE , EMC, RED, RCM |
| Sensor Data | |
| Model No. | HMW84 |
| Sensor principle | High Frequency (microwave) |
| Operation frequency | 5.8GHz +/- 75MHz |
| Transmission power | <0.2mW |
| Detection range | Max installation height：15m Max detection range：10m (diameter) |
| Detection angle | 360 |
| Environment | |
| Operation temperature | Ta: -20 °C ~ +70 °C |
| IP rating | IP65 |
Mechanical Structures and Installations
For more details, please refer to user manual.
A. Ceiling mount
B. Screw to the Luminaire by conduit
C. Attach to the shade by clamp
Note:We recommend the mounting distance between sensor to sensor should be more than 2m to prevent sensors from false-triggering.
Detection Pattern
Wiring Diagram
Placement Guide and Typical Range
Smart Phone to Device Range
The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh.
This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Documents / Resources
 |
HYTRONIK HMW84 IP65 HF Motion Sensor with Bluetooth 5.0 SIG Mesh [pdf] Owner's Manual HMW84, HMW84 IP65 HF Motion Sensor with Bluetooth 5.0 SIG Mesh, IP65 HF Motion Sensor with Bluetooth 5.0 SIG Mesh, HMW84 IP65 HF Motion Sensor, IP65 HF Motion Sensor, HF Motion Sensor, Motion Sensor, Sensor |