HYTRONIK HC005S Built-In Microwave Motion Sensor LOGO

HYTRONIK HC005S Built-In Microwave Motion Sensor

HYTRONIK HC005S Built-In Microwave Motion Sensor PRO

Technical Specifications

Operation frequency 2.4 GHz – 2.483 GHz
Transmission power 7 dBm
Range (Typical indoor) 10~30m
Protocol 5.0 SIG Mesh
Operating voltage 220~240VAC 50/60Hz
Stand-by power <1W
Load ratings 300VA(capacitive),400W(resistive)
Warming-up 20s
Sensor principle High Frequency (microwave)
Detection range (Max.)* Max installation height: 6m

Max detection range:10m (diameter)

Detection angle 30°~150°
Operation temperature Ta:-20OC~+50OC
Case temperature(MAX.) Tc:+75°
IP rating IP20
EMC standard (EMC) EN55015, EN61000, EN61547
 

Safety standard (LVD)

EN60669-1/-2-1

AS/NZS60669-1/-2-1

RED EN300328, EN301489-1/-17,EN62479,
Certification Semko,CB, CE , EMC, RED, RCM,UKCA

Download the App

Free App for set-up and commissioning

HYTRONIK HC005S Built-In Microwave Motion Sensor 3

Installation

Mechanical Structure & Dimensions

HYTRONIK HC005S Built-In Microwave Motion Sensor 1HYTRONIK HC005S Built-In Microwave Motion Sensor 2

Wire Preparation

HYTRONIK HC005S Built-In Microwave Motion Sensor 4

To make or release the wire from the terminal, use a screwdriver to push down the button.

Wiring Diagram

HYTRONIK HC005S Built-In Microwave Motion Sensor 5

Optional accessory: Reinforced Bluetooth antenna
For some special Applications, customers may need a larger Bluetooth transmission for both smartphone to device and device to device. Thanks to the reinforced Bluetooth antenna, with it being added to the sensor, the transmission distance(smartphone to device) enlarges to 20m, the distance of device to device is around 50m.

HYTRONIK HC005S Built-In Microwave Motion Sensor 6

Detection Pattern

HYTRONIK HC005S Built-In Microwave Motion Sensor 7

Additional Information / Documents

  1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance
  2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
  3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
  4. regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
  5. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
  6. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Documents / Resources

HYTRONIK HC005S Built-In Microwave Motion Sensor [pdf] Instruction Manual
HC005S Built-In Microwave Motion Sensor, HC005S, Built-In Microwave Motion Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *