PIR Standalone Motion Sensor with 5.0 SIG Mesh
DALI control with two independent channel outputs
HBIR29/2CH
Technical Specifications
| Operation frequency | 2.4 GHz – 2.483 GHz |
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol |  5.0 SIG Mesh |
| Operating voltage | 220~240VAC 50/60Hz |
| Load ratings | CH1: Max. 25 devices, 50mA CH2: 24VDC≤2A, 250VAC≤2A |
| Warming-up | 20s |
| Sensor principle | PIR detection |
| Installation height (Max.) | 6m |
| Detection range (Ø) | 9m |
| Detection angle | 360º |
| Operation temperature | Ta:-20 ºC~+50 ºC |
| IP rating | IP20 |
| EMC standard (EMC) | EN55015, EN61000, EN61547 |
| Safety standard (LVD) | EN60669-1/-2-1, AS/NZS60669-1/-2-1 |
| RED | EN300328, EN301489-1/-17 |
| Certification | CB, CE , EMC, RED, RCM, UKCA |
Download the App
Free App for set-up and commissioning
5.0 SIG mesh
https://apps.apple.com/cn/app/koolmesh/id1483721878
https://play.google.com/store/apps/details?id=com.koolmesh.sig
Smartphone app for both iOS & Android platform
https://apps.apple.com/cn/app/koolmesh/id1570378349
Koolmesh Pro app for iPad
http://www.iot.koolmesh.com
Installation
Mechanical Structure & Dimensions
- Ceiling (drill hole φ66~68mm)
- Carefully prise off the cable clamps.
- Make connections to the pluggable terminal blocks.
- Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
- Fit detection blind (if required) and desired lens.
- Clip fascia to body.
- Bend back springs and insert into ceiling.
Wire Preparation
Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.
- 200 metres (total) max. for 1mm² CSA (Ta = 50 ℃)
- 300 metres (total) max. for 1.5mm² CSA (Ta = 50 ℃)
Wiring Diagram
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
| Push switch | Short press (<1 second) ‘ Short press has to be longer than 0.1s, or it will be invalid. |
– Turn on/off – Recall a scene – Turn on only – Exit manual mode – Turn off only – Do nothing |
| Double push | – Turn on only – Exit manual mode – Turn off only – Do nothing – Recall a scene |
|
| Long press (1 second) Colour tuning |
– Dimming – – Do nothing |
|
| Simulate sensor | / | – Upgrade a normal ort/off motion sensor to a Bluetooth controlled motion sensor |
Big and small silicon gasket used to make IP54 degree protection when HBIR29/2CH series device mounted into HA03 housing for ceiling mount
Small silicon water-proof gasket dimension(size:mm)
Big silicon water-proof gasket dimension(size:mm)
HBIR29/2CH (Low-bay)
HBIR29/2CH: Low-bay flat lens detection pattern for single person @ Ta = 20ºC
(Recommended ceiling mount installation height 2.5m-6m)
| Mount height | Tangential (A) | Radial (B) |
| 2.5m | max 50m2 (Ø = 9m) | max 13m2 (Ø = 4m) |
| 3m | max 64m2 (Ø = 10m) | max 13m2 (Ø = 4m) |
| 4m | max 38m2 (Ø = 8m) | max 13m2 (Ø = 4m) |
| 5m | max 38m2 (Ø = 8m) | max 13m2 (Ø = 4m) |
| 6m | max 38m (Ø = 8m) | max 13m2 (Ø = 4m) |
Ceiling/Surface Mount Accessory HA03: Default IP20, IP65 can be request with extra big & small water-proof gaskets
Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Additional Information/Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com ->download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
HBIR29/2CH-20220424-A0
Documents / Resources
 |
HYTRONIK HBIR29/2CH PIR Standalone Motion Sensor [pdf] Instruction Manual HBIR29-2CH PIR Standalone Motion Sensor, HBIR29-2CH, HBIR29-2CH Standalone Motion Sensor, PIR Standalone Motion Sensor, Standalone Motion Sensor, PIR Motion Sensor, Motion Sensor, Sensor |
