HBIR29/AA
Installation and Instruction Manual
Multi-Directional PIR Sensor with 
5.0 SIG Mesh
DALI Output
Technical Specifications
| Operation frequency | 2.4 GHz – 2.483 GHz |
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol | 5.0 SIG Mesh |
| Stand-by power | <1W |
| Operating voltage | 220~240VAC 50/60Hz |
| DALI bus power supply | I guaranteed : 64mA I max : 80mA U rated : 15VDC |
| Sensor principle | PIR detection |
| Detection range | Installation height : 3m Max. diameter (Ø) :12m |
| Detection angle | 360° |
| Operation temperature | Ta:-15°C~+45°C |
| IP rating | IP20 |
Download the App
Free App for set-up and commissioning
Bluetooth 5.0 SIG mesh
https://apps.apple.com/cn/app/koolmesh/id1483721878
https://play.google.com/store/apps/details?id=com.koolmesh.sig
Smartphone app for both iOS & Android platform
https://apps.apple.com/cn/app/koolmesh/id1570378349
Koolmesh Pro app for iPad
Web app/platform: www.iot.koolmesh.com
Installation
Mechanical Structure & Dimensions
Wiring Diagram
Note: It is recommended tthat the wiring length be > 100mm for installation convenience.
Detection Pattern
Sensitivity set to maximum, Sensor head angle set to maximum
Installation height: 3m
Placement Guide and Typical Range
The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
| Push switch | Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. |
– Turn on/off – Recall a scene – Turn on only – Quit manual mode – Turn off only – Do nothing |
| Double push | – Turn on only – Quit manual mode – Turn off only – Do nothing – Recall a scene |
|
| Long press (. 1 second) | – Dimming – Colour tuning – Do nothing |
|
| Sensor-link (VFC signal only) | / | – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor |
| Emergency Self-Test Function | Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. |
– Start Self test( Monthly) – Start Self test (Annually) – Stop Self test – Invalid |
| Long press (l second) | – Start Self test (Monthly) – Start Self test (Annually) – Stop Self test – Invalid |
|
| Fire Alarm fVFC signal only( | Refer to  App User Manual V2.1 |
– Able to connect the Fire Alarm system – Once the fire alarm system is triggered, all the luminaries controlled by the Push Switch will enter the preset scene (normally it’s full on), after the fire alarm system gives the ending signal, all the luminaries controlled by this Push Switch will revert back to normal status. |
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com ->download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
WWW.HYTRONIK.COM
Subject to change without notice.
HBIR29/AA-20230602-A0
Documents / Resources
 |
HYTRONIK HBIR29-AA Bluetooth Multi-Directional PIR Sensor [pdf] Instruction Manual HBIR29-AA Bluetooth Multi-Directional PIR Sensor, HBIR29-AA, Bluetooth Multi-Directional PIR Sensor, Multi-Directional PIR Sensor, Directional PIR Sensor, PIR Sensor, Sensor |
