QuadCast S RGB Wired Multi-Pattern Microphone
User Guide
Overview
A Tap-to-mute sensor
B Gain control knob
C Polar pattern knob
D Headphone jack
E USB-C port
F USB cable
G Mount adapter*
* Supports both 3/8” and 5/8” thread sizes
Selecting a Microphone Polar Pattern
Adjusting Microphone Gain
Tap-to-Mute sensor
Using on PC or PS4
Connecting Headphones
Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio
HyperX NGENUITY Software
To customize lighting, download the HyperX NGENUITY software at : hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at hyperxgaming.com/support/microphones
Overview
A – Tap-to-Mute sensor
B – Gain Control Knob
C – Polar Pattern Knob
D – Headphone Jack
E – USB Cable Port
F – USB cable
G – Mount adapter*
*supports both 3/8” and 5/8” thread sizes
Questions or Setup Issues?
Contact the HyperX support team or see user manual at: hyperxgaming.com/support/microphones
Selecting a Microphone Polar Pattern
Adjusting Microphone Gain
Tap-to-Mute sensor
Using on PC or PS4
Connecting Headphones
Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.
HyperX NGENUITY Software
To customize lighting, download the HyperX NGENUITY software at: hyperxgaming.com/ngenuity
HyperX is a division of Kingston.
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE
©2020 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA.
All rights reserved. All registered trademarks and trademarks are the property of their respective owners.
Documents / Resources
 |
HyperX QuadCast S RGB Wired Multi-Pattern Microphone [pdf] User Guide QuadCast S RGB Wired Multi-Pattern Microphone, QuadCast S, RGB Wired Multi-Pattern Microphone, Multi-Pattern Microphone, Microphone |
