HX-HSCSC-BK HyperX Cloud Stinger Core Headset User Manual
Overview
A. Headband adjustment slider
B. Rotating noise cancellation mic
C. In-line audio control
In-line audio control operation
The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone.
To increase the headset volume, rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume wheel anticlockwise (towards the – sign).
To mute the microphone, slide the microphone mute button to the down position. To activate the microphone, slide the microphone mute button to the up position.
Usage (PS4™ & PS4™ Pro)
To use the headset with PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps:
- Turn on your PS4™ game console.
- Navigate to the ‘Settings’ menu and select it.
- Highlight the ‘Devices’ menu option and select it.
- Scroll down to ‘Audio Devices’ and select it.
- Choose ‘Output to Headphones’ and select ‘All Audio’’.
Using with PS4™
Usage (Xbox One™)
To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller*
If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox One™ controller (pictured below).
Using with Xbox One™ 
Usage (Nintendo Switch™)
To use the headset with Nintendo Switch™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Nintendo Switch™.
Using with Nintendo Switch™
Usage (mobile device)
To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.
Using with mobile device (phone, tablet or notebook)
Headset Specifications
Headphone
- Driver: Dynamic, 40mm with neodymium magnets
- Type: Circumaural, closed back
- Frequency response: 20Hz-20,000Hz
- Impedance: 16 Ω
- Sound pressure level: 99dBSPL/mW at 1kHz
- THD: < 2%
- Weight: 215g
- Cable length and type: Headset (1.3m)
- Connection: Headset – 3.5mm plug (4 pole)
Microphone
- Element: Electret condenser microphone
- Polar pattern: Noise-cancelling
- Frequency response: 50Hz-18,000 Hz
- Sensitivity: -41.5dBV (0dB=1V/Pa,1kHz)
Documents / Resources
 |
HYPERX HX-HSCSC-BK HyperX Cloud Stinger Core Headset [pdf] User Manual HX-HSCSC-BK, HX-HSCSC-BK HyperX Cloud Stinger Core Headset, HyperX Cloud Stinger Core Headset, Cloud Stinger Core Headset, Stinger Core Headset, Core Headset, Headset |
