HX-HSCFX-BK HyperX CloudX Flight Headset Keyboard

Flight Headset Keyboard

USER MANUAL

MODEL: HX-HSCFX-BK/WW

HyperX CloudX Flight™ Headset Keyboard

Find the language and latest documentation for your HyperX CloudX Flight Headset here.

Overview

 

Flight Headset Keyboard

A. Game balance button
B. Chat balance button
C. Microphone mute button
D. Ear cup LED
E. USB charge port
F. Power button
G. Microphone port

H. Volume wheel
I. Detachable microphone
J. Microphone mute LED
K. Wireless adapter
L. Wireless status light
M. USB charge cable

Specifications

Headphone

  • Driver: Dynamic, 50mm with neodymium magnets
  • Type: Circumaural, Closed back
  • Frequency response: 20Hz–20,000Hz
  • Impedance: 32 Ω
  • Sound pressure level: 113dBSPL/mW at 1kHz
  • T.H.D.: < 2%
  • Weight: 288g
  • Weight with mic: 298g
  • Cable length and type: USB charge cable (1m)

Microphone

  • Element: Electret condenser microphone
  • Polar pattern: Bi-directional, Noise-cancelling
  • Frequency response: 100Hz-10,000 Hz
  • Sensitivity: -51dBV (0dB=1V/Pa,1kHz)

Battery life*

  • 30 hours – LED off
  • 18 hours – Breathing LED
  • 13 hours – Solid LED

Wireless Range**

  • 2.4 GHz
  • Up to 20 meters

*Tested at 50% headphone volume

**Wireless range may vary due to environmental conditions

Usage

Using with Xbox One®

Flight Headset Keyboard

1. Connect the wireless adapter to a USB port on the Xbox One® system.
2. Power on the headset.
3. When the wireless adapter status light is solid, the headset is now connected to the adapter.
4. If logged in with an account, the Xbox One® will assign the headset to that account and notify the user.

Note: Connecting the headset to the Xbox One® system does not automatically mute or adjust the sound from the TV.

Headset Controls

Flight Headset Keyboard

Power button
Hold the power button for 3 seconds to power on/off the headset.
With the headset powered on, short press the power button to cycle through the ear cup LED modes.

The supported LED modes are solid (default), breathing, and off.

Volume wheel
Rotate the volume wheel up or down to adjust the volume level.

Flight Headset Keyboard

Game/Chat balance buttons

Press the game/chat balance buttons to adjust mix between game audio and chat audio.

Flight Headset Keyboard

The game/chat balance functionality operates independently from the overall headset audio volume.

Microphone mute button 
Press the microphone mute button to toggle the microphone mute. The microphone mute LED will indicate the current mute status.

Microphone Mute  LED Mic Status
On Muted
Off Active

Hold the microphone mute button for 3 seconds to turn mic monitoring on/off.

Headset Status Beep Tone Indicators

The headset will emit beep tones to indicate status for power, volume, game/chat balance, microphone mute, mic monitoring, and battery charge.

Power Status Beep Tone Indicator
Power on One tone (high)
Power off Two tones (high, low)
Volume Status Beep Tone Indicator
Setting to 100% maximum volume Three tones (high)
Setting to 0% minimum volume Three tones (low)
Game/Chat Balance Status Beep Tone Indicator
Setting to 50% Game / 50% Chat One tone (mid)
Setting to 100% Game / 0% Chat Two tones (low)
Setting to 0% Game / 100% Chat Two tones (low)
Microphone Mute Status Beep Tone Indicator
Microphone muted Two tones (high)
Microphone active One tone (high)
Mic Monitoring Status Beep Tone Indicator
Mic Monitoring enabled One tone (low)
Mic Monitoring disabled One tone (low)
Battery Status Beep Tone Indicator
25% battery remaining Two tones (low)
10% battery remaining Three tones (low)
5% battery remaining Five tones (mid, low, mid, low, mid)

Headset Charging

When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

Flight Headset Keyboard

Manually Pairing Headset and Wireless Adapter

The headset and wireless adapter are already paired together for first time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together.

1. Make sure the headset is powered off.
2. Plug the USB wireless adapter into the Xbox One® system.
3. Use a small pin to press the small button on the back side of the USB wireless adapter for 3 seconds. The USB wireless adapter LED will be fast blinking.

Flight Headset Keyboard

4. With the headset turned off, press and hold the headset power button for 10 seconds to enter pairing mode. The headset earcup LEDs will blink rapidly.

Flight Headset Keyboard

5. When the USB wireless adapter LED turns solid and the headset ear cup LEDs have returned to their last used mode, the pairing process has been completed.

Specifications

  • Microphone Element: Electret condenser microphone
  • Polar pattern: Bi-directional, Noise-cancelling
  • Frequency response: 100Hz-10,000 Hz
  • Sensitivity: -51dBV (0dB=1V/Pa,1kHz)
  • Battery life*
    • 30 hours – LED off
    • 18 hours – Breathing LED
    • 13 hours – Solid LED
  • Wireless Range** 2.4 GHz Up to 20 meters
  • *Tested at 50% headphone volume
  • **Wireless range may vary due to environmental conditions

Questions or Setup Issues?

Contact the HyperX support team at: hyperxgaming.com/support/headsets


Frequently Asked Questions (FAQ)

Q: How do I manually pair the headset and wireless adapter?

A: Refer to the “Manually Pairing Headset and Wireless Adapter” section on page 10 of the user manual.

Q: What should I do if I encounter setup issues?

A: For any questions or setup issues, refer to the “Questions or Setup Issues?” section on page 11 of the user manual.

Documents / Resources

HYPERX HX-HSCFX-BK HyperX CloudX Flight Headset Keyboard [pdf] User Manual
HX-HSCFX-BK, HX-HSCFX-WW, HX-HSCFX-BK HyperX CloudX Flight Headset Keyboard, HyperX CloudX Flight Headset Keyboard, Flight Headset Keyboard, Headset Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *