HyperX Cloud Stinger 3 Wireless

Overview
- Swivel-to-mute microphone
- Status LED
- Power button
- USB-C charge port
- Multifunction button
- Volume wheel
- Wireless mode switch
- USB wireless dongle
- Dongle status LED
- Pairing pin hole
- USB-C to USB-A adapter
- USB-C charge cable

Charging
It is recommended to fully charge your headset before rst use. 
Usage
Adapter Mode (2.4GHz)
- Slide the headset wireless mode switch to

- Connect the USB wireless dongle to your device.
- Power ON the headset.

Bluetooth mode
- Slide the wireless mode switch to
. The headset will enter Bluetooth pairing on the rst setup. - Go to your device Bluetooth settings, search, and connect to “HyperX Cloud Stinger 3 Wireless”.

Bluetooth pairing
- Slide the wireless mode switch to

- Press and hold both the power button and the multifunction button for 2s.
Pairing mode is active when the LED blinks blue and the voice prompt says, “Bluetooth pairing”. - Go to your device’s Bluetooth settings and connect to “HyperX Cloud Stinger 3 Wireless”.X

Setup
Windows 11
- Right-click on the sound icon in the system tray and select Sound Settings.
- Set the output device to Headphones [HyperX Cloud Stinger 3 Wireless].
- Set the input device to Microphone [HyperX Cloud Stinger 3 Wireless]

PlayStation 5
Go to the home page and select Settings > Sound.
Microphone
- Input Device: USB Headset “HyperX Cloud Stinger 3 Wireless”.
Audio Output
- Output Device: USB Headset “HyperX Cloud Stinger 3 Wireless”.
- Output to Headphones: All Audio.
Headset Controls
Status LED
STATUS ADAPTER MODE
- Pairing Fast blinking white
- Searching Blinking white
- Connected Solid-fade white for 5s
BLUETOOTH MODE
- Fast blinking blue
- Blinking blue
- Solid-fade blue for 5s
Power button
- Power on/of – Hold button for 2 seconds to power headset on/of.
- Battery level status – Press button to check the battery level.
- The status LED will automatically turn of to conserve battery life.
| BATTERY LEVEL | HEADSET STATUS LED |
| 61% to 100% | Solid-fade Green |
| 21% to 60% | Solid-fade Yellow |
| 10% to 20% | Solid-fade Red |
| < 10% | Short-blink Red |
Multifunction button
| SINGLE PRESS | DOUBLE PRESS | TRIPLE PRESS | LONG PRESS (2S) |
| Play / Pause Answer Call | Skip Track End Call Reject Call | Previous Track | Activate Voice Assistant |
Note: Button functionality can vary between devices and apps.
Volume wheel
Scroll wheel to adjust volume level
Swivel to Mute Microphone

HyperX NGENUITY Software
Go to HyperX.com/NGENUITY to download the NGENUITY software.
NGENUITY software features include:
- Adjustable auto shut-of behavior
- Battery level indicator
- Mic monitoring
Questions or Setup Issues?
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.
Battery Replacement
- Power OFF the headset.
- Carefully pull the left ear cushion from the headset.
- Unscrew the 4x Philips screws to separate the driver cover from the left earcup.
- Gently separate the cover from the earcup to avoid any damage.
- Locate and remove the battery secured with a connector.
- Place new battery matching correct pin orientation.
- Close the driver cover and earcup. Reverse steps 3 and 2. Make sure to push cushion into the slot all around the earcup.
- Power ON the headset and test for functionality.
Documents / Resources
![]() | Cloud Stinger 3 Wireless |
References
- Customer Support | HyperX ROWhyperx.com
- Magasins Darty : Électroménager, high-tech, cuisine sur mesure, réparationmagasin.darty.com
- SAV Darty : Comment utiliser, entretenir et réparer son produitsav.darty.com
- youtube.com/@darty/videos/www.youtube.com
- User Manualmanual.tools
Published: November 16, 2026
Updated: November 17, 2026

