HyperX Cloud Stinger 2
Gaming Headset
Quick Start Guide
Overview
A. Gaming headset
B. PC splitter cable
C. DTS Headphone:X instruction card
PC or Notebook
Follow the instructions on the DTS Headphone:X instruction card to enable DTS Headphone:X.
Xbox Series or PlayStation 5
Mobile (Phone/Tablet)
Volume Wheel
Scroll up or down to adjust volume level.
Swivel to Mute Microphone
Questions or Setup Issues?
Contact the HyperX support team at hyperx.com/support
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.
DTS, DTS:X, DTS Sound Unbound, Headphone:X, the DTS logo, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries.
© 2020 DTS, Inc. ALL RIGHTS RESERVED.
Documents / Resources
 | Cloud Stinger 2 Gaming Headset |
References
- Customer Support – HyperX ROWhyperx.com
- User Manualmanual.tools
Published: October 28, 2023
Can the HyperX Cloud Stinger 2 Wireless Gaming Headset be attached to the HyperX QuadCast S Gaming USB Microphone.
Can the HyperX Cloud Stinger 2 Wireless Gaming Headset be attached to the HyperX QuadCast S Gaming USB Microphone?
The HyperX Cloud Stinger 2 Wireless headset and the HyperX QuadCast S microphone are separate USB-based devices. Because the Cloud Stinger 2 Wireless uses a 2.4GHz wireless USB adapter for its connection, it does not physically "attach" to the microphone via a cable.
However, you can use them together on a PC or PlayStation by following these steps:
Note: The QuadCast S does have a 3.5mm headphone jack for real-time monitoring, but this is intended for wired headphones. Since your headset is the wireless version, you would typically listen through its own wireless connection rather than plugging it into the microphone.
Read the full Q&A page