HYPERLITE Rejilla 14 Hexagonal Garage Lights

Model

Note: The package includes one spare unit for each tube and connector.

FEATURES & SPECIFICATIONS

INSTALLATION

• Connect the tubes by series as follows, each red circle requires its own power source.

CAUTION!!

1. Please be careful when connecting the light bars with the connectors. Don’t damage the copper needle in the connectors.
2. TEST BEFORE INSTALLING TO THE CEILING.
3. Only 1 connector for AC input cord:
   • Printed wire / Black – Line
   • Blank wire / White – Neutral

Installation Instruction

1. Confirm the correct AC input connector
2. Connect the 120° Y connector
3. Connect the 120° V connector

Note: Use one cable per 62 tubes, with a maximum connection of 440W@120V. If you need to use more than 62 tubes, make sure to evenly distribute the input lines. For any questions or assistance, feel free to contact us.

How to install it on the ceiling.

1. Grid roof – Tie it with zip tiesRemarks:
   1. There should be 1 wire out to connect with 120V;
   2. Please install by a professional electrician;
2. Flat roof – Screw the connector from the hole to the ceiling directly

WARNING

Please do not match the connectors by violence, it would damage the whole set of lamps. If it does not match the lamps well, please try to joint accurately or change the lamp, do not damage the connectors by violence. Test by AVO meter before powering on.

Contact

• Web: www.hi-hyperlite.com
• Email: service@hi-hyperlite.com
• Tel: +1(855) 688 7879

A good & brand new product. Congrats! Enjoy a brighter life now.

Feel free to contact us

• Email: service@hi-hyperlite.com
• Toll-free number: +1(855) 688 7879
• www.hi-hyperlite.com

Documents / Resources

HYPERLITE Rejilla 14 Hexagonal Garage Lights [pdf] Instruction Manual Rejilla 14 Hexagonal Garage Lights, Rejilla 14, Hexagonal Garage Lights, Garage Lights, Lights

References

• User Manual