Hyperlite Hexagonal Garage Lights
A good & brand new product. Congrats! Enjoy a brighter life now. Feel free to contact us
- Email: service@hi-hyperlite.com
- Toll-free number: +1 (855) 688 7879
HEXAGON LED LIGHT
Note: The package includes one spare unit for each tube and connector.
FEATURES & SPECIFICATIONS
INSTALLATION
Connect the tubes by series as follows, each red circles requires its own power source.
Note: Please splice the tubes in the direction of the arrow shown in the diagram. The direction of the arrow on the light tubes must be consistent with the diagram, otherwise the light tubes will not work.
CAUTION!!
- Please install by professional electrician;
- Test before installing to the ceiling.
- Please do not connect the light tubes to AC120V, its input voltage is DC24V.
- Please be careful when connecting the light bars with the connectors. Don’t damage the copper needle in the connectors.
- Confirm the correct input connector
- Connect the 1200 Y connector
- Connect the 1200 V connector
How to install it on the ceiling.
- Grid roof – Tie it with zip ties
- Flat roof – Screw the connector from the hole to the ceiling directly
WARNING
Please do not match the connectors by violence, it would damage the whole set of lamps. If it does not match the lamps well, please try to joint accurately or change the lamp, do not damage the connectors by violence. Test by AVO meter before powering on.
RGB BT LED Controller Instructions
BanlanX App
- Supports APP control for iOS (requires iOS 10.0 or higher) and Android devices(requires Android 4.4 or higher)
- You can search “BanlanX” in App Store or Google Play to find the App, or scan the QR code to download and install.
App operation
Register and Login
Click on the upper right corner of the page “Sign up” → Fill in the required information →Registration success →Login
Note
Click “Sign in without account → Enter Guest Mode (some features may be limited).
Add Device
After registering successfully, Add device in 
or
→Searching page → Select the device → Finish adding.
Color Correction
Click the 
icon in the upper right corner of the control interface → 
Color Correction + Select the corresponding color button based on the actual color shown by the LED Correction is completed.
Note
Due to variations in the LED, if the Ul color does not match the actual light, calibration is required.
Control Lighting Effect
Dynamic Effects
Music Effects:
DlY Effects
Favorites
Work With 2.4G Remote Control
The 2.4G remote control model (RF3) compatible with SP668E: Supports one-to-many control, one remote control can control multiple hexagon lights; Supports many-to-one control, each hexagon light can bind up to 5 remote controls.
Warning
Ensure the batteries are installed correctly according to polarity (+ and -); Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations; Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
- Web: www.hi-hyperlite.com
- Email: service@hi-hyperlite.com
- Tel: +1(855) 688 7879
Documents / Resources
 | Hexagonal Garage Lights |
References
- User Manualmanual.tools