USER MANUAL
LED FLOOD LIGHT
MARS series

FEATURES & SPECIFICATIONS

The MARS series LED floodlight is designd to provide a cost-effective, energy-effificient solution for illuminating building facades, sign lighting, wall washing building exteriors, landscape lighting. MARS luminaires deliver a uniform, wide flood distribution.

Model	CES-LS-VN-30W	CES-LS-VN-50W	CES-LS-VN-70W	CES-LS-VN-100W
Lumens	3300LM	6000LM	8400LM	12000LM
Efficacy	110LM/W
Model	CES-LS-VN-150W	CES-LS-VN-200W	CES-LS-VN-240W
Lumens	18000LM	24000LM	28800LM
Efficacy	120LM/W
CCT	3000K 4000K,5000K
CRI	>70
Beam Angle	120°
L70@24°C	>60,000hours
Mounting	(1/2″)Knuckle, Trunnion, U-bracket, Slipfitter
Color	Bronze
Input Voltage	120Vac
Power factor	>0.9
Operating Temperature	-86°F to 122°F
Listings	cUL
IP Rating	IP 65, Suitable for wet location
Warranty	24 months

DIMENSIONS

INSTALLATION INSTRUCTIONS

READ THOROUGHLY BEFORE INSTALATION
WARNING! FIXTURES MUST BE GROUNDED and installed in accordance with the National Electrical Code and all local codes. Failure to do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH.
WARNING! Dangerous voltage exist within the unit and all precautions usually observed in handling high voltage equipment should be observed when replacing light engine or otherwise servicing luminares. Disregarding this warning could result in electrical shock and possible injury to the individual installing or servicing this equipment. Installation, service and maintenance of luminaires should be done by a qualifified licensed electrician.
CAUTION!
To reduce the risk of death, personal injury or property damage from fire, electric shock,falling parts, cuts/abrasions, and other hazards please read all warnings and instructions included with and on the fixture box and all fixture labels.

NOTE!

• This equipment is only for professional installation. Non-professional personnel shall not remove or install the equipment.
• To avoid damage,falling,electric shock or fire, please do not modify the lamp or replace accessories without confirming with the supplier.
• Maintenance/installation and replacement the lamps , please confirm to cut off the power supply, and the lamps have set up a cooling. Please make sure the lamps properly installed before processing power.
• Ensure the accurate and reliable connection.
• Ensure that the product around the vent, the lamp cannot violate any fire prevention regulations when using.

Carefully read these instructions before installing product and keep it for future reference. If you do not understand these instructions, before starting any work, contact service@hi-hyperlite.com or 855-688-7879.

1/2 Knuckle Mount (Only available on 30w, 50w, 70w, 100w light)

1. Open junction box and run wiring into box.
2. Thread light body onto junction box using the 1/2-14 threads on knuckle
3. Connect wiring.
4. Adjust light head to desired angle and tighten Hexagon screw.

	Black Wire – Line Voltage Green Wire – Ground White Wire – Neutral
LIGHT MUST BE GROUNDED

1/2 Wall Mount (Only glass lenses have this installation)

Trunnion Mount

1. Loosen light head adjustment screws with hex key.
2. Securely attach light to wall and connect wiring.
3. Connect wiring.
4. Rotate light head to desired angle and tighten adjustment screws.

	Black Wire – Line Voltage Green Wire – Ground White Wire – Neutral
LIGHT MUST BE GROUNDED

U-bracket Mount

1. Loosen light head adjustment screws with hex key.
2. Securely attach light to wall and connect wiring.
3. Adjust light head to desired angle and tighten Hexagon screw.

	Black Wire – Line Voltage Green Wire – Ground White Wire – Neutral
LIGHT MUST BE GROUNDED

1. Attach the slipfitter mounting kit onto the light head.
2. Rotate light head to desired angle and tighten adjustment screw.
3. Connect wiring.
4. Securely attach light to pole/post.The maximum pole/post diameter is 2.36 in.

	Black Wire – Line Voltage Green Wire – Ground White Wire – Neutral
LIGHT MUST BE GROUNDED

MORE PRODUCTS…

• LED High Bay Light
• LED Flood Light
• Area Light & Canopy Garage Light
• LED Grow Light
• LED Wall Pack Light
• LED Vapor Tight Light
• Temporary Work Light
• LED Recessed Downlight

www.hi-hyperlite.com
Use hyperlite LED flood light, enjoy brighter life now
If you need more information about our lights,
please email us or call us
Email: service@hi-hyperlite.com
Toll-free number: +1(855) 688 7879

Documents / Resources

HYPERLITE CES-LS-VN-30W MARS Series LED Flood Light [pdf] User Manual CES-LS-VN-30W MARS Series LED Flood Light, CES-LS-VN-30W, MARS Series LED Flood Light, LED Flood Light, Flood Light, Light

References

• User Manual