HyperSpace HS2310 Bluetooth Keyboard User Guide

Before attempting to connect, operate or adjust this product, please save and read the User Guide completely. The style of the product shown in this User Guide may be different from the actual unit due to various models.

Copyright
This document contains proprietary information protected by copyright. All rights are reserved. No part of this guide may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.

Trademarks
Hyper, the ++Hyper logo, are trademarks or registered trademarks of Targus International LLC in the U.S. and in certain other countries. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used by Apple Inc. under license. Android is a trademark of Google LLC. All other logos and registered trademarks are the property of their respective owners.

Regulatory Compliance

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CE
This equipment is in compliance with the requirements of the following regulations: EN 55032/EN 55035

IC
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

WEEE Information
For EU (European Union) member users: According to the WEEE (Waste electrical and Electronic Equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, waste disposal service or the shop where you purchased the product.

Introduction

The HyperSpace Full-sized Bluetooth Keyboard is a wireless keyboard that connects to your computer or device using Bluetooth technology, eliminating the need for a USB receiver. It works by pairing with your device through a Bluetooth connection, allowing you to type without being physically connected to your computer.

Package Contents

HyperSpace Full-sized Bluetooth Keyboard

1 X 0.8M USB C to USB C Charging Cable
User Guide

Product Compatibility

Windows®
macOS®

iOS®
Android™

Product Name	Operation Frequency (MHz)	Maximum EIRP Power (dBm)	Working Distance
Wireless Keyboard: HS2310	2402 -2480 MHz	-8.9dBm(EU)	10 Meters

Product Overview

Item		Description
1.	Type C Port	Keyboard charging port
2.	Power Switch	Power On/Off
3.	Bluetooth 1/2/3 LED	Bluetooth 1/2/3 connecting status LED
4.	Power LED	Power On/Off status LED
5.	Elevated feet	Elevated fixed feet with angle support

*The power delivered by the charger must be between min 0.0 Watts required by the radio equipment, and max 2.5 Watts in order to achieve the maximum charging speed.

Battery alert function

When the battery is low, the low power LED will flash to indicate the batteries need to be charged.

The power delivered by the charger must be between min 0.0 Watts required by the radio equipment, and max 2.5 Watts in order to achieve the maximum charging speed. This equipment complies with European Commission Regulation (EU) 2023/826.

Off: N/A Standby (when all wireless connections are deactivated): < 0.5 W
Networked standby: < 2.0 W
The period of time after which the power management function switches the equipment automatically into: 0.05W
Above testing data is base on below external power AC adapter which is not be included.

Object	External power supply
Manufacturer	Targus
Model	APA107
Rating	Input: 100-240V~ 50/60Hz, 1.8A; Output: 5.0VDC 3.0A, 15.0W or 9.0VDC 3.0A, 27.0W or 12.0VDC 3.0A, 36.0W or 15.0VDC 3.0A, 45.0W or 20.0VDC 3.25A, 65.0W Total output 65.0W Max.

Rechargeable battery

Battery capacity:	750 mAh 3.7V
Battery life with different backlight settings:	Low: 24hrs, Medium: 10hrs, High: 6hrs
Recharging with USB-C cable	Yes
Time to recharge:	3 – 4 hrs
Input power requirements:	DC 5V 500mA

Battery Warning
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS
Take regular breaks and keep a good posture. Consult your physician prompty if you notice any lost of motion or pain in your wrist when using the keyboard. Replacement of a battery with an incorrect type that can defeat a safeguard (for example.in the case of some lithium battery types); disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

The power delivered by the charger must be between min 0.0 Watts required by the radio equipment, and max 2.5 Watts in order to achieve the maximum charging speed.

Operational Instructions

Bluetooth pairing

Turn on the keyboard by sliding the power button to the ON position. The power LED will be lit for 3 seconds and then begin flashing for up to 3 minutes, as the keyboard automatically attempts to pair the 1st Bluetooth channel to your device.

Switch ON the Bluetooth function of your device and turn on Bluetooth search mode. Pairing will start automatically.
Select “HyperSpace Keyboard” in the bluetooth menu on your device. The LED on the HyperSpace Keyboard will stop flashing once the keyboard is successfully connected to your device.
If you want to pair an additional Bluetooth device, choose either Bluetooth channel 2 or Bluetooth channel 3 key and press the chosen key for 5 seconds to enable Bluetooth pairing mode, the Blue LED will flash for up to 3 minutes whilst the keyboard is in pairing mode.

If you want to switch between devices once multiple devices have been paired, choose one of the 3 Bluetooth channel keys and press the chosen key for 2 seconds to change devices.

Help with setup: Keyboard is not working

Restart your device and Power off/on your keyboard.

Press the Bluetooth channel keys for 2 seconds to select your Bluetooth device.
After pairing for the first time, your device will automatically connect to the keyboard within 3-5 seconds the next time you turn on the keyboard.
In case of connection failure, delete the keyboard from the bluetooth menu on your device, and try re-pairing the keyboard to your device.

Power saving mode
When paired, the keyboard will enter into sleep mode after being idle for 30 minutes. To activate the keyboard, press any key and wait 3 seconds. If unpaired, the keyboard will enter sleep mode after 2 minutes.

Function keys

Note:

Number Lock = clear in macOS
No function for ScrLK and Pause in mac/Android/ChromeOS/iOS
PrtScn may not function in some Andriod systems/devices

”ScrLK” “Pause” “Insert” “Numlock” will not function in ChromeOS.
Function key features may have variations depending on the Operation System version and devices.

Turn on toggle key option to switch on the ‘beep’ when CAPS and NUM lock is pressed in Windows:

Specifications

Manufacturer Hyper Products Inc.
Address 46721 Fremont Blvd. Fremont, California 94538 USA
Commercial Registration Number 20-3492348

Model / Reg	HS2310
Dimension & Weight	Length:	426.8mm / 16.8inches
	Width:	113.37mm / 4.46inches
	Height:	17.5mm / 0.69inches
Weight:		487g / 1.07lb

2-YEAR LIMITED WARRANTY

PORTUGAL AND SPAIN CUSTOMERS:

3 YEARS LIMITED WARRANTY OR AS REQUIRED BY LOCAL LAWS.
We pride ourselves on the quality of our products. For complete warranty details and a list of our Worldwide offices, please visit www.HyperShop.com. Hyper product warranty does not cover any device or product that is not manufactured by Hyper (including, but not limited to, laptops, smartphones, devices, or any other product that may be used in connection with the Hyper product). Hyper Limited Warranty provided is subject to any rights and remedies the purchaser may have under local laws. Australian customers: For complete warranty details, see warranty statement enclosed.

Declaration of Conformity

www.hvoershoo.com

Supplier’s Declaration of Conformity