HYDROTHERM 2025 Towel Rails

Product Specifications

• Design: Minimalist
• Material: Chrome
• Usage: Towel Rail
• Manufacturer: Hydrotherm

WATER FILLING INSTRUCTIONS

Follow the instructions carefully.

THERE ARE FIVE BASIC STEPS

1. Disconnect Towel Rail and remove from wall mounts (if already installed). Slip off Hard Wire Attachments.
2. Turn towel rail upside down to gain access to chrome hexnut insert. (Opposite side of element).
3. Unscrew hexnut wiith a spanner and remove chrome insert.
4. Tilt towel rail and fill with tap water. Use a funnel to make it easier. Stop filling when the rail is almost full, as indicated in diagram
5. Screw chrome hexnut insert back in place, reattach Hard Wire Attachments.

Towel Rail is now ready to be installed 

1. Remove from wall. Remove Hard Wire Attachments (HWA).
2. Turn rail upside down
   
3. Fill Rail with water
4. Screw insert back in
5. Turn rail correct way up for installation
   

www.hydrotherm.com.au

Frequently Asked Questions

• Q: Can I use any type of water to fill the towel rail?
  A: It is recommended to fill the towel rail with tap water for  optimal performance.
• Q: Do I need to empty the water from the towel rail for  maintenance?
  A: Periodically emptying and refilling the towel rail with fresh  water is recommended to maintain efficiency.

Documents / Resources

HYDROTHERM 2025 Towel Rails [pdf] Installation Guide 2025, 2025 Towel Rails, 2025, Towel Rails, Rails

References

• User Manual