Hunter GT-884D Full Circle Opposing Nozzle Configuration
Specifications
- Brand: Golf Irrigation
- Product Model: GT-884
- SKU: GT884D48P8
- Description: GT-884D Golf Rotor, full-circle opposing nozzle configuration, valve-in-head design, integrated Pilot-100 Two-Way Module, nozzle 48 installed, 80 PSI
Product Usage Instructions
Installation
- Choose an appropriate location for the GT-884D Golf Rotor.
- Dig a hole in the ground according to the specified dimensions in the user manual.
- Place the rotor in the hole and ensure it is level.
- Connect the necessary irrigation pipes to the rotor following the provided guidelines.
- Adjust the nozzle to the desired settings based on your watering needs.
Operation
- Turn on the water supply to the rotor.
- Adjust the rotation and spray distance of the rotor as needed.
- Monitor the performance of the rotor and make adjustments if necessary.
Maintenance
- Regularly inspect the rotor for any damage or blockages.
- Clean the nozzles and filters to ensure proper water flow.
- Replace any worn-out parts to maintain optimal performance.
Shipping Information
- UPC-A: 0611698656747
- Ocean Pallet: 216
- Land Pallet: 180
- Master Carton: 4
TTS-884 / G884 / G84B NOZZLE PERFORMANCE DATA
- Note: Nozzle plug P/N 315300 installed in the front side of the nozzle housing.
- Preliminary performance data.
- Copyright © 2025 Hunter Industries Inc. Hunter, the Hunter logo, and other marks are trademarks of Hunter Industries Inc., registered in the U.S. and certain other countries.
- https://www.hunterirrigation.com/irrigation-product/gt-884/gt-884-d-48-p8
- 071525
FAQs
How do I adjust the spray distance of the GT-884D Golf Rotor?
To adjust the spray distance, use the provided tool to turn the radius adjustment screw clockwise to decrease the distance or counterclockwise to increase it.
Can I use different nozzles with the GT-884D Golf Rotor?
Yes, you can replace the installed nozzle with a different one from the compatible list provided in the user manual for varied watering needs.
What is the recommended operating pressure for the GT-884D Golf Rotor?
The recommended operating pressure for optimal performance is 80 PSI. Ensure that your irrigation system meets this requirement for best results.
Documents / Resources
 |
Hunter GT-884D Full Circle Opposing Nozzle Configuration [pdf] User Guide GT-884, GT-884D Full Circle Opposing Nozzle Configuration, GT-884D, Full Circle Opposing Nozzle Configuration, Opposing Nozzle Configuration, Nozzle Configuration, Configuration |