Hunter-LOGO

Hunter Industries HC Flow Meter

Hunter-Industries-HC-Flow-Meter-PRODUCT-IMG

Detect, monitor, and report critical flow zone data via wired or wireless connection with this robust and simple-to-install flow sensor.

Sensor: Flow

KEY BENEFITS

  • Compatible with Hydrawise® enabled HC, HPC, Pro-HC, and HCC controllers
  • Provides station-level flow rates and totals
  • Sends automatic alerts in the event of high-flow, low-flow, or unscheduled flow conditions
  • Flow reports within Hydrawise software can display total system water use and individual station water use for accurate water budgeting and tracking
  • Robust brass construction with union fittings for easy installation and removal for winterization
  • Analog dial on the face of the meter displays daily flow totals and a leak detector

OPERATING SPECIFICATIONS

  • Scaled pulse output is pre-calibrated from the factory based on the size of the meter
  • When wired directly to the controller, the meter must be installed with shielded, minimum 18 AWG wire, up to 1,000′ from the controller
  • Accuracy: ± 2% of reading at recommended flow
  • Warranty period: 2 years

WIRELESS HC FLOW METER BENEFITS

  • Add wireless communication to any HC Flow Meter (sensor sold separately)
  • Send flow data wirelessly from the sensor to the controller, without the need to run wire or dig trenches

WIRELESS HC FLOW METER OPERATING SPECIFICATIONS

  • 500′ range (line of sight) from transmitter to receiver
  • Communication frequency: 900 MHz for use in North America
  • Transmitter power supply: 3 AA batteries
  • Receiver power supply: 24 VAC from host controller
  • Warranty period: 2 years

HC-075-FLOW (¾” male thread)

  • Height: 31/8″
  • Length: 91/8″
  • Depth: 31/8″
  • Weight: 2.1 lbs

HC-100-FLOW (1″ male thread)

  • Height: 35/8″
  • Length: 101/4″
  • Depth: 31/8″
  • Weight: 3.1 lbs

HC-150-FLOW (11/ 2″ male thread)

  • Height: 61/4″
  • Length: 167/8″
  • Depth: 47/8″
  • Weight: 14.5 lbs

HC-200-FLOW (2″ male thread)

  • Height: 61/4″
  • Length: 171/ 2″
  • Depth: 47/8″
  • Weight: 16.3 lbs

WIRELESS HC FLOW METERHunter-Industries-HC-Flow-Meter-FIG- (2)

HC FLOW METER SPECIFICATIONS

HC-075-FLOW HC-100-FLOW HC-150-FLOW HC-200-FLOW
(3/4″) (1″) (11/ 2″) (2″)
Minimum flow

(GPM)                         0.22

 

0.3

 

0.88

 

1.98

Maximum

recommended flow  15

(GPM)

 

30

 

66

 

105

Maximum flow

rate (GPM)                  21

 

34

 

88

 

132

Dial reading               1 pulse per 0.1 1 pulse per 1 1 pulse per 1 1 pulse per 1
(U.S. gal)                    U.S. gal U.S. gal U.S. gal U.S. gal

WIRELESS HC FLOW METER MODELSHunter-Industries-HC-Flow-Meter-FIG- (1)

Visit hunterindustries.com
RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation

Documents / Resources

Hunter Industries HC Flow Meter [pdf] User Guide
HC Flow Meter, HC Meter, Flow Meter, Meter

References

Leave a comment

Your email address will not be published. Required fields are marked *