HUMANTECHNIK-logo

HUMANTECHNIK Signolux Visual Signal Alert System

HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-1

Product Information

  • Product Name: Visual Signal System
  • Languages: DE, EN, FR, NL, IT, ES
  • Components: Vibrating pad

Product Usage Instructions

  1. Read the user manual carefully and completely before setting upand using the product.
  2. Keep the user manual in a safe place for easy access by other users.
  3. Setup:
    • Connect the vibrating pad to the designated port.
    • Ensure that the LED lights corresponding to different events are active:
      • Doorbell 1: Green LED is active
      • Doorbell 2: Green LED is active
      • Telephone: Orange LED is active
      • Person call: Yellow LED is active
      • Babycry: White LED is active
      • Fire alarm: Red LED is active
      • Water alarm: Blue LED is active
      • Alarm: Red LED is active
    • All values are in seconds (e.g., 1.5 = 1.5 seconds).

Contact Information

  • Germany:
  • Switzerland:
  • France:
    • Tel.: +33 (0) 3 89 44 14 00,
    • Fax: +33 (0) 3 89 44 62 13,
    • E-mail: sms@audiofr.com
  • Great Britain:

Safety instructions

Prior to putting the device into operation and using it, kindly read this manual thoroughly and in full. Keep this user manual in a safe place so that it is also accessible for other users at any time.

Functioning principle

This »signolux« vibrating pad has no batteries and can only be used together with the »signolux«-receivers, with exception of the standard receiver A-2614-0 and the plug-in receiver A-2644-0/W! The vibrating pad informs you about incoming event alerts through vibration.

Setup

Connect the vibrating pad with the »AUX« socket of the respective receiver. Trigger an alert to test the function (e.g. press the door- bell button).
Please note:
This vibrating pad works only with signolux-receivers! It is not compatible with with the standard receiver A-2614-0, the flash lamp A-2644-0/W or devices of the »lisa« system!

HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-2

Event identification

  • Doorbell 1: Doorbell icon 1 (green LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-3

  • Doorbell 2: Doorbell icon 2 (green LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-4

  • Telephone: Telephone icon (orange LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-5

  • Person call: Person icon (yellow LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-6

  • Babycry: Baby icon (white LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-7

  • Fire alarm: Fire icon (red LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-8

  • Water alarm: Water icon (blue LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-9

  • Alarm: Alarm icon (red LED) is active

    HUMANTECHNIK-Signolux-Visual-Signal-Alert-System-fig-10

  • All values are in seconds: e.g.: 1,5 = 1,5 seconds

ABOUT COMPANY

  • Germany:
  • Switzerland:
  • France:
    • Tel.: +33 (0) 3 89 44 14 00,
    • Fax: +33 (0) 3 89 44 62 13,
    • E-mail: sms@audiofr.com
  • Great Britain:

Documents / Resources

HUMANTECHNIK Signolux Visual Signal Alert System [pdf] User Manual
Signolux Visual Signal Alert System, Signolux, Visual Signal Alert System, Signal Alert System, Alert System

References

Leave a comment

Your email address will not be published. Required fields are marked *