Acme Mini User Manual

Product Overview

The Acme Mini (ACME SABER Mini) is a compact moving head lighting fixture designed for professional illumination applications. It integrates a high-output lamp with automated movement and versatile control interfaces.

Setup and Preparation

Carefully inspect the hardware before installation. Ensure all cables and connections meet the specified operational and electrical requirements.

• Power Connection: Connect the unit to an AC mains supply between 100 V and 240 V at 50/60 Hz using the dedicated power input connector.

• DMX Data Link: Interconnect fixtures using shielded 3-pin or 5-pin XLR data cables for communication with an external controller.

• Addressing: Configure DMX addressing directly through the onboard control interface or remotely via a universal DMX controller.

• Firmware Updates: Maintain fixture performance by uploading firmware updates across the active DMX link connection.

Operation and Controls

The fixture provides an onboard user interface alongside external control options to accommodate various performance environments.

• Onboard Display: Integrated LCD display paired with a 4-button control panel for setting adjustments and system navigation.

• DMX512 Control: Operates across 12 control channels in 1 DMX protocol mode for complete stage programming.

• Master/Slave Operation: Synchronizes multiple linked units without requiring an external lighting console.

• Sound Active Mode: Utilizes internal audio detection to trigger automated lighting sequences synchronized to ambient sound.

Troubleshooting and Maintenance

Regular cleaning and adherence to basic safety measures prolong the operating life of the fixture and prevent operational faults.

• Electrical Precautions: Immediately disconnect the fixture from mains power if damaged. Never touch internal or external wiring during operation due to electric shock risk.

• Cable Management: Prevent interference and hazard by avoiding twisting power cables together with signal or communication lines.

• Environmental Care: Do not operate the unit in dirty, excessively humid, or dusty environments.

• Optical Cleaning: Periodically clean the external housing and optical elements using a soft, non-abrasive cloth to maintain light output.

• Troubleshooting: Consult the manufacturer documentation if the fixture fails to respond to DMX signals, fails to strike the lamp, or experiences motor reset errors.