SWEVY SW360 LCD Phase Rotation Indicator
LCD Phase Rotation Indicator
Avètisman: During the testing do not touch any test pencil on any phase or any bare metal probe in order to avoid the electronic shock.
Karakteristik
- Convenient and practical with compact and nice looking appearance
- PC material shell safe and durable
- Protection level CATIII 600V
- Low voltage automatically reminder and shuts down if there is no operation
Karakteristik teknik
- Display three digit LCD display with 18mm of text height
- Sampling rate:3 times/second
- Opere voltage ranje: 40-600V
- Working environment:Temperature:0℃to+40℃ Humidity:0-80%Rh
- Storage environment Temperature:-10℃to+60℃ Humidity:0-85%Rh
- Quiescent current less than 3mA
- Power supply three of AAA battery
- Instrument size(H×W×D):116mm×66mm×26mm
- Wire length:800mm
- Accessories:1 of carrying case 3 of test clips
Deskripsyon panèl
- Connecting wire for testing
- LCD ekspozisyon
- Endikatè sekans faz
- Batri voltage endikatè estati
- Lòj batri
- Test clips Usage
- After the battery is installed in the correct way, the yellow, green and red of three phase input terminals of the instrument should be reliably connected with the three phase electrical terminals to be tested.
- When there is no input or less than 40V,the LCD has no display.
- When the measured three phase electricity lacks of phase the LCD will display as follows:
- When the rotation direction of phase sequence is clockwise the LCD will display as follows:
- When the rotation direction of phase sequence is anti-clockwise the LCD will display as follows:
- During the testing please observe whether there is a low voltage indicator on the LCD display. If there is it indicates that the battery voltage is lower than the normal value which will affect the instrument function and measurement accuracy Sometimes this situation will also cause the instrument to fail to start .At this time the battery should be replaced in time.
- After finishing the testing please disconnect the input terminal from the testing terminal.
FAQ
What should I do if the LCD does not display anything?
Asire vol D' atage is above 40V and all connections are secure.
Kouman pou mwen konnen si batri a bezwen ranplasman?
Siveye vol batri atage status indicator on the LCD. If it shows low voltage, ranplase batri a.
Dokiman / Resous
 |
SWEVY SW360 LCD Phase Rotation Indicator [pdfManyèl Enstriksyon SW360 LCD Phase Rotation Indicator, SW360, LCD Phase Rotation Indicator, Phase Rotation Indicator, Rotation Indicator, Indicator |