coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Konfigirasyon rezo

1. Pouvwa sou pwodwi a
   • Align the opener to the slot
   • Vire kouvèti batri a nan sans kontrè ak zegwi mont lan pou ouvri li.
   • Remove the battery insulation film to power
2. Peze bouton RESET la pandan 3 segonn epi lage l, LED wouj la ap flache pou konfigirasyon rezo a.

Enstriksyon Enstalasyon

Pozisyon enstalasyon
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Tanpri li manyèl la ak anpil atansyon epi sèvi ak pwodwi a kòrèkteman
Mèsi pou acha aasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Deskripsyon pwodwi

Konsèy:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Paramèt pwodwi

• Product Name Zigbee Ambient Light Sensor
• Wireless Pwotokòl Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm