AttoWave - logo

ODIN C-497
MANYÈL PWOPRIYETE
MÒN WÒCH

Kontni kache
1 ENTWODIKSYON
2 Karakteristik
3 Dim Mode
4 BOUTON OPERASYON
5 Mode Menu
6 Mòd tès la
7 Reset faktori
8 memwa
9 Mòd Auto bèbè
10 GARANTI LIMITE
11 SPECIFICATIONS
12 Dokiman / Resous
12.1 Referans
13 Post ki gen rapò

ENTWODIKSYON

Mèsi paske w te achte rada/lazè ODIN C-497 ki devlope pa Rocky Mountain Radar. ODIN C-497 se premye ak inik rada sofistike ak detektè lazè nan mond lan ki gen trè bon pèfòmans.
Nou kontan genyen ou kòm yon kliyan ki gen anpil valè epi nou espere ou pral kontan ak ODIN C-497 ou a. Manyèl sa a bay tout enfòmasyon ou bezwen pou mete ODIN C-497 a travay pou ou.
REMAK: Toujou obeyi tout lwa lokal ak federal lè w ap itilize aparèy sa a.
ID FCC: QKK-ODN gen ID FCC: W75-BTM0
Ekipman sa a ta dwe enstale ak opere ak yon distans minimòm de 20 santimèt ant radyatè a ak kò ou oswa moun ki tou pre.
Aparèy sa a konfòm ak pati 15 Règ FCC yo. Operasyon an sijè a de kondisyon sa yo: (1) Aparèy sa a pa ka lakòz entèferans danjere, epi (2) aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.
Anplis de sa, nenpòt chanjman oswa modifikasyon nan pwodui sa a, ki pa ekspreseman apwouve pa Rocky Mountain Radar alekri, ka anile otorite itilizatè a pou opere pwodui sa a.

ODIN C-497Modil Bluetooth AttoWave C 497

Karakteristik

  1. X, K, Ka-Band, Lazè Deteksyon
  2. Ekspozisyon: 256 × 32 Pixel RED OLED
  3. 4 Bouton : [MENI]-[DIM]-[MUTE]-[VIL]
  4. Dim Mode : KLIYE -> DIM -> DIMMER -> FONWA
  5. Mute On -> AutoMute -> Mute Off
  6. Mòd vil : HIGHWAY <-> CITY
  7. Vwa sou / Off
  8. Lang Vwa: ANGLE / ESPANYÒL
  9. Ton alam: HIGH / LOW
  10. X Band On/Off
  11. K Band On/Off
  12. Ka-Band On/Off
  13. Lazè On/Off
  14. K Etwat/Lajè
  15. Ka Etwat/Lajè
  16. K Band Filter On/Off
  17. TSF On/Off
  18. Voltage Meter On/Off
  19. Scrambler On/Off
  20. Tès pwòp tèt ou sou / Off
  21. Mòd Reset faktori
  22. Memwa Anviwònman Itilizatè
  23. Mòd tès faktori

Ekspozisyon
WOUJ OLED Display ak 256 × 32 piksèl

3. Montre pou Alèt Lazè / Rada
3.1. Lazè “□□□□□LASER□□□□□□”
3.2. X Band
“□□□□X□▶□□□□□1□□□”
“□□□□X□▶▶□□□□2□□□”
“□□□□X□▶▶▶□□□3□□□”
“□□□□X□▶▶▶▶□□4□□□”
“□□□□X□▶▶▶▶▶□5□□□”
3.3. K Band
“□□□□K□▶□□□□□1□□□”
“□□□□K□▶▶□□□□2□□□”
“□□□□K□▶▶▶□□□3□□□”
“□□□□K□▶▶▶▶□□4□□□”
“□□□□K□▶▶▶▶▶□5□□□”
3.4. Ka Band
“□□□Ka□▶□□□□□1□□□”
“□□□Ka□▶▶□□□□2□□□”
“□□□Ka□▶▶▶□□□3□□□”
“□□□Ka□▶▶▶▶□□4□□□”
“□□□Ka□▶▶▶▶▶□5□□□”
3.5. RD (K, Ka-Band) Nivo alam : 1-5

Dim Mode

4.1. KLE: OLED Display eklere.
4.2. DIM: OLED Display diminye.
4.3. DIMMER: OLED Display vin dimmer.
4.4. DARK: OLED Display etenn, se sèlman yon ti pwen k ap deplase de goch a dwat kèlkeswa alam yo.

1. Si mòd tès pwòp tèt ou limen, tès pwòp tèt ou ap kòmanse nan lòd sa yo apre mesaj kòmanse «Rocky Mountain Radar»

  1. Egzamen Scrambler (Sèlman si mòd Scrambler sou li)
  2. X Alam (nivo fòs siyal 1-5)
  3. K Alam (nivo fòs siyal 1-5)
  4. Ka Alam (nivo fòs siyal 1-5)
  5. Lazè Alam
    Anviwònman Itilizatè yo sou Voix sou/kouche, lang, Ton Son Alam, Scrambler ON/Off yo pral aplike jan yo ye.

1.1. Ekspozisyon ak odyo alam sou mòd tès pwòp tèt ou

  1. “□SCRAMBLER□TEST□” (Afichaj & Son Tès Scrambler – sèlman lè mòd Scrambler lise)
  2. “□□□□X□▶□□□□□1□□□” ~ “□□□□K□▶▶▶▶▶□5□□□□□□” (K Display) & Sound
  3. “□□□□K□▶□□□□□1□□□” ~ “□□□□K□▶▶▶▶▶□5□□□□□□” (K Display) & Sound
  4. “□□□Ka□▶□□□□□1□□□” ~ “□□□Ka□▶▶▶▶▶□5□□□” (Ka Display & Sound Alam)
  5. “□□□□□LASER□□□□□□” (Ekspozisyon Lazè & Son Alam)

2. Apre tès pwòp tèt ou, ekspozisyon an pral montre sitiyasyon an nan anviwònman itilizatè yo nan lòd sa yo.

  1. Vwa On/Off (sèlman ekspozisyon, pa gen bip)
  2. Angle/Panyòl (sèlman ekspozisyon, pa gen bip)
  3. Ton segondè/ba (sèlman ekspozisyon, pa gen bip)
  4. X Band On/Off (sèlman ekspozisyon, pa gen bip)
  5.  K Band On/Off (sèlman ekspozisyon, pa gen bip)
  6. Ka-Band On/Off (sèlman ekspozisyon, pa gen bip)
  7. Lazè On/Off (sèlman ekspozisyon, pa gen bip)
  8. K Etwat/Lajè (sèlman ekspozisyon, pa gen bip)
  9.  Ka etwat/lajè (sèlman ekspozisyon, pa gen bip)
  10. K Band Filter On/Off (sèlman ekspozisyon, pa gen bip)
  11. TSF On/Off (sèlman ekspozisyon, pa gen bip)
  12. Voltage Meter On/Off (sèlman ekspozisyon, pa gen bip)
  13. Scrambler On/Off (sèlman ekspozisyon, pa gen bip)
  14. Tès pwòp tèt ou sou / Off (sèlman ekspozisyon, pa gen bip)
  15. Dim Mode (sèlman ekspozisyon, pa gen bip)
  16. Mòd bèbè (sèlman ekspozisyon, pa gen bip)

2.1. Display pral montre sa ki annapre yo dapre paramèt yo.

  1. Vwa Limen/Etenyen: “□□□□VOICE□ON□□□□” / “□□□□VOICE□OFF□□□”
  2. Angle/Panyòl: “□□□□ENGLISH□□□□□” / “□□□□SPANISH□□□□□”
  3. Ton wo/ba: “□□□□TONE□HIGH□□□” / “□□□□TONE□LOW□□□□”
  4. X Band On/Off: “□□□X□Band□On□□□□” / “□□□X□Band□Off□□□”
  5. K Band On/Off: “□□□K□Band□On□□□□” / “□□□K□Band□Off□□□”
  6. Ka-Band On/Off: “□□Ka-Band□On□□□□” / “□□Ka-Band□Off□□□”
  7. Lazè On/Off: “□□□□Laser□On□□□□” / “□□□□Laser□Off□□□”
  8. K Etwat/Lajè: “□□□□K□Et□□□□” / “□□□□□K□Lajè□□□□□”
  9. Ka Etwat/Lajè: “□□□Ka□Et□□□□” / “□□□□Ka□Wide□□□□□”
  10. Filtè K Band On/Off: “□□K□FILTER□ON□□□” / “□□K□FILTER□OFF□□”
  11. TSF On/Off : “□□□□□TSF□On□□□□□” / “□□□□□TSF□Off□□□□
  12. Voltage Meter On/Off : “VoltageMeter□On□” / “VoltageMeter□Off”
  13. Scrambler On/Off: “□□SCRAMBLER□ON□□” / “□□SCRAMBLER□OFF□”
  14. Tès Otomatik On/Off: “□□SELF□TEST□ON□□” / “□□SELF□TEST□OFF□”
  15. Mode Dim: “□□□□□BRIGHT□□□□□” / “□□□□□□DIM□□□□□□□”/
    “□□□□□DIMMER□□□□□”/ “□□□□□□DARK□□□□□□”/
  16. Mòd bèbè: “□□□□MUTE□ON□□□□□” / “□□□□MUTE□OFF□□□□”/ “□□□□□□□□□□”/□□□

: OLED Display eklere. : OLED Display dim. : OLED Display vin dimmer. : OLED Display etenn, se sèlman yon ti pwen k ap deplase de goch a dwat kèlkeswa alam yo..

BOUTON OPERASYON 

1. Bouton [MENI].
1.1. Peze bouton [MENU] pou antre nan mòd MENU
2. [MUTE] Bouton

  1. Peze bouton [MUTE] pou chanje Mòd Mute (Bèbè Off -> Mute On -> AutoMute)
    -> Moute Off: "□□□□MUTE□OFF□□□□" ak mesaj vwa (si vwa a limen) oswa ak 3 bip (si vwa a koupe)
    -> Silence On: “□□□□MUTE□ON□□□□□” ak mesaj vwa (si vwa a limen) oswa ak 1 bip (si vwa a koupe)
    -> AutoMute: "□□□□AUTO MUTE□□□□" ak mesaj vwa (si vwa a sou) oswa ak 2 bip (si vwa a koupe)
  2. Bouton [VIL].
    3.1. Peze pou chanje mòd vil ( HIGHWAY <-> CITY )
    -> Highway: “□□□□□HIGHWAY□□□□” ak mesaj vwa (si vwa a limen) oswa ak 2 bip (si vwa a koupe)
    -> Vil: “□□□□□□CITY□□□□□□” ak mesaj vwa (si vwa a limen) oswa ak 1 bip (si vwa a koupe)
  3. Peze epi kenbe pou 3sec. pou chanje mòd Scrambler ( Scrambler On <-> Scrambler Off )
    -> Scrambler On: “□□SCRAMBLER□ON□□” ak 1bip
    -> Scrambler Off: "□□SCRAMBLER□OFF□" ak 2 bip

[DIM] Bouton
1.1. Peze bouton [DIM] pou chanje mòd Dim (KLE -> DIM -> DIMMER -> DARK)
-> BRIGHT: "□□□□□BRIGHT□□□□□" ak mesaj vwa (si vwa a limen), oswa ak 4 bip (si vwa a koupe)
-> DIM: “□□□□□□DIM□□□□□□□” ak mesaj vwa (si vwa a limen) oswa ak 1 bip (si vwa a koupe)
-> DIMMER: "□□□□□DIMMER□□□□□" ak mesaj vwa (si vwa a limen) oswa ak 2 bip (si vwa a koupe)
-> DARK: “□□□□□□DARK□□□□□□” ak mesaj vwa (si vwa a limen) oswa ak 3 bip (si vwa a koupe).
Si anviwònman an fini, ou pral wè yon ti pwen k ap deplase de goch a dwat nan ekspozisyon.

Mode Menu

1. Peze epi kenbe bouton [DIM/MENU] pou 3sec. pou antre nan Menu Mode.
Ekspozisyon an ap montre “□□□□=□MENU□=□□□□” ak 1bip.
2. Meni Lis

Lis Menu  Opsyon 
Vwa On/Off Vwa On <-> Vwa Off
Mòd lang vwa Angle <-> Panyòl
Ton son alam Segondè <-> Ba
X Band On/Off X Band On <-> X Band Off
K Band On/Off K Band On <-> K Band Off
Ka Band On/Off Ka Band On <-> Ka Band Off
Lazè On/Off Lazè On <-> Lazè Off
K Etwat/Lajè K Etwat <-> K Lajè
Ka Etwat/Lajè Ka Etwat <-> Ka Lajè
K Band Filter On/Off K Band Filter On <-> K Band Filter Off
TSF On/Off TSF On <-> TSF Off
BLE On/Off BLE On <-> BLE Off
Voltage Meter On/Off Voltage Meter On <-> Voltage Meter Off
Scrambler On/Off Scrambler On <-> Scrambler Off
Tès pwòp tèt ou sou / Off Self Test On <-> Self Test Off
Reset faktori?
MENI Sòti

3. Operasyon bouton sou Menu Mode
3.1. Bouton [DIM]: Desann nan meni an ak yon sèl bip
3.2. Bouton [MENI]: Scroll up nan meni an ak yon sèl bip
3.3. Bouton [MENI] oswa [VIL]: Chanje oswa Chwazi opsyon nan meni an
4. Ou ka chwazi youn nan sa ki annapre yo pou w soti nan mòd Menu,

  1. Chwazi "Menu Sòti" sou lis meni an.
  2. Peze epi kenbe [MENU] pou 3sec. pandan y ap sou Menu Mode
  3. Pa fè anyen pou plis pase 10sec.

Aparèy la ap flache “□□□□□□EXIT□□□□□□” de fwa ak 2 bip epi sòti nan Mode Menu.

Mòd tès la

1. Leson patikilye mòd
Alam tès la ap kòmanse nan lòd sa a.

  1. Tès Scrambler
  2. K Alam (Fòs siyal 1-5 nivo)
  3.  Ka Alam (nivo siyal fòs 1-5)
  4. Lazè Alam

Anviwònman itilizatè yo sou mòd Vwa On/Off, mòd Vwa Lang, Ton Son Alam yo pral aplike jan yo ye pandan Mode Tès.
2. Montre ak son pandan Mòd Tès

  1. “□SCRAMBLER□TEST□” (Afichaj ak Son tès Scrambler)
  2. “□□□□K□▶□□□□□1□□□” ~ “□□□□K□▶▶▶▶▶□5□□□□□□” (K Display) & Sound
  3. “□□□Ka□▶□□□□□1□□□” ~ “□□□Ka□▶▶▶▶▶□5□□□” (Ka Display & Sound Alam)
  4. “□□□□□LASER□□□□□□” (Ekspozisyon Lazè & Son Alam)

3. Display ap montre “□□□□TEST□END□□□□” ak 1bip lè alam tès la fini.
4.Pweze nenpòt bouton ([DIM/MENU], [MUTE], [VIL], [TESSE] pou sispann alam tès la pandan mòd tès la.

Reset faktori

1. Lè "Reset faktori?" se chwazi nan meni an, tout paramèt yo pral retabli nan default faktori.
Ekspozisyon an ap flache “□RESET□COMPLETED” de fwa ak 3 bip.
2. Faktori Default

Mode  Opsyon  Faktori Default 
Dim Mode KLE -> DIM -> DIMMER -> FONWA KLIYE
Mòd bèbè Mute On -> AutoMute -> Mute Off Mute Off
Vil Mode HIGHWAY <-> VIL HIGHWAY
Vwa On/Off Vwa On <-> Vwa Off Vwa sou
Mòd lang vwa Angle <-> Panyòl angle
Ton son alam Segondè <-> Ba Segondè
X Band On/Off X Band On <-> X Band Off X Band On
K Band On/Off K Band On <-> K Band Off K Band On
Ka Band On/Off Ka Band On <-> Ka Band Off Ka Band On
Lazè On/Off Lazè On <-> Lazè Off Lazè sou
K Etwat/Lajè K Etwat <-> K Lajè K Wide
Ka Etwat/Lajè Ka Etwat <-> Ka Lajè Ka Wide
K Band Filter On/Off K Band Filter On <-> K Band Filter Off K Band Filter On
TSF On/Off TSF On <-> TSF Off TSF Off
BLE On/Off BLE On <-> BLE Off BLE sou
Voltage Meter On/Off Voltage Meter On/Off Voltage Meter On
Scrambler On/Off Scrambler On <-> Scrambler Off Scrambler sou
Tès pwòp tèt ou sou / Off Self Test On <-> Self Test Off Tès pwòp tèt ou sou

3. Apre reset faktori a fin fè, Inite a pral montre paramèt aktyèl yo nan lòd sa a epi retounen nan premye liy meni an (Vwa On/Off).

  1. HIGHWAY (Vwa)
  2. Moute Off (Vwa)
  3. Vwa sou (Vwa)
  4. ANGLE (Vwa)
  5. TON HI (3 bip)
  6. X Band On (1 bip)
  7. K Band On (1 bip)
  8. Ka-Band On (1 bip)
  9. Lazè sou (1 bip)
  10. K Wide (1 bip)
  11. Ka Wide (1 bip)
  12. K Band Filter On (1 bip)
  13. TSF Off (2 bip)
  14. BLE sou (1 bip)
  15. Voltage Meter On (1 Bip)
  16. Scrambler sou (1 bip)
  17. SelfTest sou (1 bip)

memwa

1. Inite a pral sove anviwònman itilizatè yo sou mòd sa yo, aplike kòmsadwa lè inite a vire tounen sou.

Mode  Opsyon  Faktori Default
Dim Mode KLE -> DIM -> DIMMER -> FONWA KLIYE
Mòd bèbè Mute On -> AutoMute -> Mute Off Mute Off
Vil Mode HIGHWAY <-> VIL HIGHWAY
Vwa On/Off Vwa On <-> Vwa Off Vwa sou
Mòd lang vwa Angle <-> Panyòl angle
Ton son alam Segondè <-> Ba Segondè
X Band On/Off X Band On <-> X Band Off X Band On
K Band On/Off K Band On <-> K Band Off K Band On
Ka Band On/Off Ka Band On <-> Ka Band Off Ka Band On
Lazè On/Off Lazè On <-> Lazè Off Lazè sou
K Etwat/Lajè K Etwat <-> K Lajè K Wide
Ka Etwat/Lajè Ka Etwat <-> Ka Lajè Ka Wide
K Band Filter On/Off K Band Filter On <-> K Band Filter Off K Band Filter On
TSF On/Off TSF On <-> TSF Off TSF Off
BLE On/Off BLE On <-> BLE Off BLE sou
Voltage Meter On/Off Voltage Meter On/Off Voltage Meter On
Scrambler On/Off Scrambler On <-> Scrambler Off Scrambler sou
Tès pwòp tèt ou sou / Off Self Test On <-> Self Test Off Tès pwòp tèt ou sou

Alèt Priyorite
1. Lazè siyal
2. K, Ka-Band Siyal

Mòd Auto bèbè

1. Vwa Off Mode
1.1. Lè alam la kòmanse, inite a pral alèt ak 4bip ak odyo bèbè pou 2 minit, epi ankò alèt ak 4bip epi kenbe muet pou 2 minit, li pral kontinye nan fason sa a jiskaske 2 minit apre siyal la fin ale.
1.2. Si yo detekte yon lòt gwoup pandan AutoMute sou premye siyal gwoup la, inite a pral rekòmanse alèt la ak 4 bip epi kenbe muet pou 2 minit epi kontinye nan fason sa a jiskaske 2 minit apre siyal la fin ale.
Lazè / RD Alam

1. Montre pou alam lazè/rada

  1. Lazè
    “□□□□□LASER□□□□□□”
  2. X Band
    “□□□□X□▶□□□□□1□□□”
    “□□□□X□▶▶□□□□2□□□”
    “□□□□X□▶▶▶□□□3□□□”
    “□□□□X□▶▶▶▶□□4□□□”
    “□□□□X□▶▶▶▶▶□5□□□”
  3. K Band
    “□□□□K□▶□□□□□1□□□”
    “□□□□K□▶▶□□□□2□□□”
    “□□□□K□▶▶▶□□□3□□□”
    “□□□□K□▶▶▶▶□□4□□□”
    “□□□□K□▶▶▶▶▶□5□□□”
  4. ka bann
    “□□□Ka□▶□□□□□1□□□”
    “□□□Ka□▶▶□□□□2□□□”
    “□□□Ka□▶▶▶□□□3□□□”
    “□□□Ka□▶▶▶▶□□4□□□”
    “□□□Ka□▶▶▶▶▶□5□□□”
  5. RD (X, K, Ka-Band) gen 5 nivo pou montre fòs siyal li yo.

2. Bip Son Alam
2.1. Son bip gen 4 nivo pou K ak Ka-Band ki baze sou fòs siyal li yo.
2.2. Pou alam lazè, inite a toujou fè pi wo nivo (4 nivo) son bip.

Operasyon ak Smartphone atravè Bluetooth

ODIN gen yon modil Bluetooth ladan l pou w ka konekte ODIN atravè Bluetooth ak yon smartphone epi opere li ak smartphone la tankou anviwònman meni ak ekspozisyon alèt, elatriye.

GARANTI LIMITE

Manifakti a garanti ODIN C-497 ou a kont tout defo nan materyèl ak atizan konn fè pou yon peryòd de yon (1) ane apati dat acha orijinal la, sijè a
tèm ak kondisyon sa yo: Responsablite sèl manifakti a anba Garanti sa a limite a swa reparasyon oswa, nan opsyon manifakti a, ranplasman nan ODIN C-497 la. Pa gen okenn garanti eksprime oswa implicite, ki gen ladan sa yo nan kondisyon fizik pou yon objektif patikilye oswa komèsan, ki pwolonje pi lwen pase figi sa a.
Gen kèk eta ki pa pèmèt limit sou konbyen tan yon garanti implicite dire, kidonk limit ki anwo a ka pa aplike pou ou.

SPECIFICATIONS

  • Kalite reseptè rada: Superheterodyne konvèsyon doub
  • Kalite antèn: antèn lineyè polarize endepandan
  • Kalite Aparèy: Diskriminasyon frekans
  • Frekans nan operasyon
  • 10.525 GHz (X bann)
  • 24.150 GHz (K bann)
  • 33.400 - 36.000GHz (Ka super lajè bann)
  • Tip reseptè lazè: reseptè siyal lazè enpulsyonèl
  • Tanperati operasyon: -20C - +70C
  • Tanperati Depo: -30c - +100C
  • Kondisyon pou pouvwa: 5V, 500mA negatif tè

Dokiman / Resous

Modil Bluetooth AttoWave C-497 [pdfManyèl Pwopriyetè a
BTM0, W75-BTM0, W75BTM0, C-497 Modil Bluetooth, C-497, Modil Bluetooth

Referans

Post ki gen rapò

Kite yon kòmantè

Adrès imel ou p ap pibliye. Jaden obligatwa yo make *