Danfoss 015G4550

Danfoss Aero RAVL Thermostatic Radiator Valve

Modèl: 015G4550

Entwodiksyon

This manual provides essential information for the installation, operation, and maintenance of your Danfoss Aero RAVL Thermostatic Radiator Valve, Model 015G4550. This device is designed to regulate room temperature efficiently, contributing to energy savings and enhanced comfort. Please read these instructions carefully before installation and use to ensure proper function and safety.

Enfòmasyon sou Sekirite

Pwodwi souview

The Danfoss Aero RAVL Thermostatic Radiator Valve is a modern, gas-filled thermostatic head designed for precise temperature control. It features a fast response time of approximately 10 minutes and offers tactile feedback for every 0.5°C temperature change. The design allows for easy, tool-free mounting and is compatible with Danfoss RAVL type valve housings.

Karakteristik kle:

Eleman:

Danfoss Aero RAVL Thermostatic Radiator Valve front view

Figi 1: Devan view of the Danfoss Aero RAVL Thermostatic Radiator Valve. This image displays the main body of the valve head with its temperature setting dial and the red indicator for the current setting.

Danfoss Aero RAVL Thermostatic Radiator Valve with RAVL 26mm connection label

Figi 2: Side view of the Danfoss Aero RAVL Thermostatic Radiator Valve, highlighting its compatibility with RAVL 26mm connections. The image shows the connection mechanism at the base of the thermostatic head.

Enstalasyon

Proper installation is crucial for the optimal performance of your thermostatic radiator valve. Follow these steps carefully.

Tcheke konpatibilite:

The Danfoss Aero RAVL thermostatic head is specifically designed for Danfoss RAVL valve bodies with a 26 mm mounting diameter. Ensure your existing valve body is compatible before proceeding with installation.

Danfoss thermostatic head compatibility chart

Figure 3: Compatibility guide for replacing old Danfoss radiator thermostats. This chart illustrates that the Aero™ RA/VL head is suitable for RAVL valve bodies with a 26 mm valve diameter.

Diagram of a RAVL valve body with 26mm dimension

Figure 4: Technical diagram of a Danfoss RAVL valve body, indicating the 26 mm diameter for proper head attachment. This diagram helps identify the correct valve type.

Danfoss Aero RAVL installation diagram

Figure 5: Installation diagram showing the Danfoss Aero™ RA/VL thermostatic head fitting onto an old Danfoss RA/VL valve with a 26 mm mounting diameter. The image highlights the clamp ring connection for identification.

Enstriksyon pou monte:

  1. Prepare the Valve Body: Ensure the existing RAVL valve body is clean and free from debris. If replacing an old thermostatic head, remove it carefully.
  2. Set the Thermostatic Head: Turn the setting dial on the new Aero RAVL head to its maximum setting (usually '5' or '28°C') to fully retract the pin.
  3. Pozisyon tèt la: Place the Aero RAVL thermostatic head onto the RAVL valve body. Ensure it is aligned correctly.
  4. Secure the Mounting Ring: Push the mounting ring firmly onto the valve body until you hear an audible 'click'. This confirms the head is securely attached. No tools are required for this step.
  5. Verifye enstalasyon: Gently try to rotate the head. It should be firmly attached and not wobble.

Enstriksyon Operasyon

The Danfoss Aero RAVL valve allows for manual temperature control to maintain your desired room temperature.

Mete tanperati a:

Danfoss Aero RAVL valve installed on a radiator

Figure 6: The Danfoss Aero RAVL thermostatic valve installed on a radiator within a room setting. This illustrates the product's appearance when in use.

Antretyen

The Danfoss Aero RAVL thermostatic valve requires minimal maintenance to ensure long-term performance.

Depanaj

If you experience issues with your thermostatic radiator valve, consult the table below for common problems and solutions.

PwoblèmKòz posibSolisyon
Radiator remains cold despite high setting.Valve pin stuck in closed position; air in the system; system pressure too low.Remove the thermostatic head and gently press the valve pin several times to free it. Bleed the radiator. Check system pressure and refill if necessary.
Room is too cold/hot, inconsistent temperature.Thermostatic head obstructed; incorrect setting; external heat sources/drafts.Ensure the head is not covered by curtains or furniture. Adjust the setting. Eliminate drafts or reposition heat-emitting objects.
Valve head is loose or falls off.Mounting ring not fully engaged.Re-attach the thermostatic head, ensuring the mounting ring clicks securely into place.
No tactile feedback when adjusting dial.Pwoblèm mekanis entèn.Contact Danfoss support or a qualified technician for inspection.

Espesifikasyon

KarakteristikDetay
Non modèlDanfoss Aero RAVL
Nimewo Modèl015G4550
Dimansyon pwodwi4.33"D x 5.12"W x 10.63"H
Pwa atik0.15 kilogram (5.3 ons)
Kalite kontwolèKontwòl men
Kalite Kontwòl TanperatiManyèl
Ranje Tanperati7°C - 28°C
Tan reponsJiska 10 minit
Kontwòl Presizyon0.2 K
Kalite aliyeDirect valve mount (RAVL 26mm)
MateryèlPlastik
KoulèBlan
Karakteristik espesyalEfikasite enèji

Garanti ak sipò

Danfoss products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Danfoss website. For technical support, spare parts, or service inquiries, please contact your local Danfoss representative or authorized dealer.

Ou ka jwenn plis enfòmasyon ak resous sipò sou Magazen Danfoss sou Amazon.

Dokiman ki gen rapò - 015G4550

Preview Manyèl Enstalasyon ak Itilizatè Tèmosta Entelijan Danfoss EcoTM
Gid konplè pou enstale, opere, ak depanaj tèmosta entelijan Danfoss EcoTM lan. Aprann sou karakteristik yo, koneksyon aplikasyon an, ak konpatibilite adaptè pou yon kontwòl efikas pou chofaj lakay ou.
Preview Danfoss Aero® ak Danfoss Aveo® Tamper Shells Gid Enstalasyon
Gid enstalasyon pou Danfoss Aero® ak Danfoss Aveo® tampkokiy, ki fèt pou koneksyon valv RAV ak RAVL. Gen ladan enstriksyon detaye ak detay pwodwi.
Preview Gid Enstalasyon ak Operasyon Valv Radyatè Tèmostatik Entelijan Danfoss EcoTM
Gid konplè pou enstalasyon, itilizasyon, ak depanaj valv radyatè tèmostatik entelijan Danfoss EcoTM lan, ki gen ladan entegrasyon aplikasyon, planifikasyon, ak espesifikasyon teknik pou chofaj efikas lakay.
Preview Gid Enstalasyon ak Itilizatè pou Tèmosta Radyatè Elektwonik Danfoss EcoTM
Gid konplè pou enstale ak itilize tèmosta radyatè elektwonik Danfoss EcoTM lan. Aprann sou konfigirasyon, karakteristik, entegrasyon aplikasyon, pwogramasyon tanperati, ak espesifikasyon teknik pou kontwòl chofaj lakay efikas.
Preview Danfoss EcoTM Electronic Radiator Thermostat: Installation and User Guide
Comprehensive guide to installing, setting up, and using the Danfoss EcoTM electronic radiator thermostat for efficient home heating control. Learn about adapter compatibility, app integration, scheduling, and technical specifications.
Preview Adaptè Danfoss RAV & RAVL 014G0250: Gid Enstalasyon ak Retire
Gid konplè pou enstale ak retire adaptè Danfoss RAV & RAVL la (modèl 014G0250). Aprann kijan pou konekte adaptè a ak tiyo RAV ak RAVL yo epi kijan pou detache tèmosta Danfoss Ally™ oswa Danfoss Eco™ ou a san danje.