Milwaukee M18 PACKOUT Radio Charger (Model 2950-20) Instruction Manual

1. Pwodwi souview

The Milwaukee M18 PACKOUT Radio Charger (Model 2950-20) is a durable, high-performance audio solution designed for jobsite environments. It integrates seamlessly with the PACKOUT modular storage system, providing robust sound, charging capabilities for M18 batteries, and device charging via USB.

Figure 1: Milwaukee M18 PACKOUT Radio Charger (Model 2950-20) with key dimensions.

2. Enstalasyon

2.1 Enstalasyon batri

1. Jwenn konpatiman batri a sou bò aparèy la.
2. Open the weather-sealed compartment cover.
3. Insert a fully charged Milwaukee M18 battery into the designated slot until it clicks securely into place.
4. Close the compartment cover firmly to ensure a weather-sealed connection.

2.2 Koneksyon pouvwa

• For AC power and battery charging, locate the integrated power cord on the side of the unit.
• Unwrap the power cord from its storage hooks.
• Ploge kòd la pouvwa nan yon priz estanda 120V AC.
• The unit will automatically begin charging any inserted M18 battery.

3. Operasyon Enstriksyon

3.1 Kontwòl souview

The control panel features a central power/volume knob, mode selection buttons, preset buttons, equalizer controls, and a clock button. Playback controls (play/pause, skip forward/backward) are also present.

Figi 2: Detaye view nan panèl kontwòl la.

3.2 Pouvwa Limen/Etenn ak Volim

• To power on/off: Press and hold the central power/volume knob.
• To adjust volume: Rotate the central power/volume knob clockwise to increase volume and counter-clockwise to decrease.

3.3 Radio Operation (AM/FM, Presets)

1. Peze a MÒD button to cycle through available modes (Bluetooth, AM, FM, Auxiliary).
2. Once in AM or FM mode, use the forward/backward arrow buttons to tune to desired stations.
3. To save a preset: Tune to the desired station, then press and hold a PRESET button (1-9) until the display confirms storage.
4. To recall a preset: Briefly press the corresponding PRESET bouton.

3.4 Koneksyon Bluetooth

1. Peze a MÒD button until "Bluetooth" is selected. The Bluetooth indicator will flash.
2. On your mobile device, enable Bluetooth and search for "Milwaukee Radio".
3. Select the radio from your device's Bluetooth list to pair. The indicator will become solid when connected.
4. Use your device or the radio's playback controls (play/pause, skip) to manage audio.

3.5 Aparèy Chaje

• Open the weather-sealed compartment on the side of the unit.
• Locate the USB charging port inside.
• Connect your mobile device or other USB-powered device using a compatible USB cable.
• Close the compartment cover to protect your device from jobsite elements while charging.

3.6 Equalizer and Clock Settings

• Peze a EQ button to access equalizer settings (Bass, Treble). Use the arrow buttons to adjust levels.
• Peze a LÒJ button to set the time. Use the arrow buttons to adjust hours and minutes, then press LÒJ ankò pou konfime.

4. Antretyen

• Netwayaj: Siye inite a ak anonsamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all compartments are closed before cleaning.
• Depo: Store the radio in a dry, protected area when not in use. Ensure the power cord is neatly wrapped and secured.
• Swen batri: Always use genuine Milwaukee M18 batteries. Follow battery charging and storage guidelines provided with your M18 batteries.

NAN. Depanaj

• Pa gen pouvwa: Ensure the unit is properly plugged into an AC outlet or that a charged M18 battery is securely installed. Check the power outlet for functionality.
• Pa gen son: Verify volume is turned up. Check that the correct audio source (AM/FM/Bluetooth/Aux) is selected. Ensure Bluetooth device is paired and playing audio.
• Resepsyon radyo ki pa bon: Extend the antenna fully. Try repositioning the unit to improve signal.
• Pwoblèm Bluetooth Pairing: Ensure the radio is in Bluetooth mode and discoverable. Forget the device on your mobile phone and attempt to re-pair. Ensure no other devices are actively connected to the radio.
• Batri pa chaje: Confirm the unit is plugged into a live AC outlet. Ensure the M18 battery is correctly inserted. Check for any error indicators on the display.

6. Espesifikasyon

7. Garanti ak sipò

This Milwaukee M18 PACKOUT Radio Charger is covered by a Manufacturer Warranty. For specific warranty details, registration, or support, please refer to the documentation included with your product or visit the official Milwaukee Electric websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.