Moxa AWK-3131A-US Industrial WLAN Access Point User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, configuration, operation, and maintenance of the Moxa AWK-3131A-US Industrial 802.11a/b/g/n WLAN Access Point. The AWK-3131A-US is designed for reliable wireless communication in demanding industrial environments, functioning as an Access Point, Bridge, or Client.

Key features of the AWK-3131A-US include:

• Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client support
• Easy setup and deployment with AeroMag technology
• Millisecond-level Client-based Turbo Roaming for seamless connectivity
• Complete redundancy with AeroLink Protection
• Integrated antenna and power isolation
• Support for 5 GHz DFS channels
• Wide operating temperature range of -25 to 60°C

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the equipment.

• Pwovizyon pou pouvwa: Ensure the power source meets the device's voltage and current requirements. Disconnect power before performing any maintenance.
• Anviwònman: Install the device in an environment within its specified operating temperature and humidity ranges. Avoid exposure to excessive moisture, dust, or direct sunlight.
• Atè: Proper grounding is essential for safe operation and protection against electrical surges.
• Antèn: Use only approved antennas with the device. Do not operate the device without antennas connected.
• Pèsonèl ki kalifye: Se sèlman pèsonèl kalifye ki ta dwe fè enstalasyon ak antretyen.

3. Pake kontni

Verifye ke pake ou a gen atik sa yo:

• Moxa AWK-3131A-US Industrial WLAN Access Point unit
• Two detachable antennas
• Documentation (Quick Installation Guide, Warranty Card)
• Blòk tèminal pou antre pouvwa

Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte vandè ou imedyatman.

4. Pwodwi souview

The AWK-3131A-US is a robust industrial wireless device. Below is an illustration of the unit with its key components and indicators.

Figi 1: Moxa AWK-3131A-US Industrial WLAN Access Point. The device features LED indicators for power, PoE, fault, state, signal strength, WLAN activity, and LAN activity. It includes two RJ45 LAN ports, an RS-232 console port, and two antenna connectors. Two external antennas are shown alongside the main unit.

4.1 Endikatè ki ap dirije

4.2 Pò ak Konektè

• Antre pouvwa: Terminal block for redundant DC power inputs (PWR1, PWR2) and PoE.
• Antenna Connectors (A & B): RP-SMA connectors for external antennas.
• LAN Ports (RJ45): Two 10/100/1000BaseT(X) Ethernet ports for network connectivity.
• RS-232 Console Port: For local management and configuration via a serial connection.

5. Enstalasyon ak Enstalasyon

5.1 Monte Aparèy la

The AWK-3131A-US supports DIN-rail mounting. Ensure the mounting surface is stable and provides adequate ventilation.

1. Attach the DIN-rail kit to the rear panel of the device using the provided screws.
2. Hook the top of the DIN-rail clip onto the DIN rail.
3. Push the bottom of the device towards the DIN rail until it snaps into place.

5.2 Enstalasyon antèn

Carefully screw the two provided antennas onto the RP-SMA connectors labeled 'A' and 'B' on the front panel. Ensure they are finger-tight but do not overtighten.

5.3 Koneksyon pouvwa

The device supports redundant DC power input and Power over Ethernet (PoE).

• DC pouvwa: Connect a compatible DC power supply to the terminal block. The device supports dual power inputs (PWR1 and PWR2) for redundancy.
• PoE: If using PoE, connect a PoE-enabled Ethernet cable to one of the LAN ports. Ensure the PoE source meets the device's power requirements.

After connecting power, the PWR1/PWR2 or PoE LED should illuminate green.

5.4 Rezo Koneksyon

Connect Ethernet cables from your network devices (e.g., switches, computers) to the LAN ports on the AWK-3131A-US.

5.5 Inisyal Konfigirasyon

Aparèy la ka configuré atravè yon web browser or the RS-232 console port.

• Web-Jesyon ki baze sou:
  1. Connect your computer to a LAN port of the AWK-3131A-US.
  2. Configure your computer's IP address to be in the same subnet as the device's default IP (e.g., 192.168.1.x).
  3. Louvri a web browser and enter the device's default IP address (refer to the Quick Installation Guide for the default IP).
  4. Konekte avèk non itilizatè ak modpas default la.
• Console Management:
  1. Connect a serial cable from your computer to the RS-232 console port.
  2. Use a terminal emulation program (e.g., PuTTY) with appropriate serial settings (e.g., 115200 bps, 8 data bits, no parity, 1 stop bit, no flow control).
  3. Konekte avèk non itilizatè ak modpas default la.

It is highly recommended to change the default login credentials immediately after initial access.

6. Opere Aparèy la

The AWK-3131A-US can operate in various modes to suit different network requirements.

6.1 Mòd Fonksyònman

• Mode Pwen Aksè (AP): Functions as a central hub for wireless clients to connect to the wired network.
• Mòd pon: Connects two wired networks wirelessly, acting as a transparent bridge.
• Mòd Kliyan: Allows the device to connect to an existing Access Point, extending wireless connectivity to wired devices connected to its LAN ports.

Select the desired operating mode through the web-based management interface under the "Wireless Settings" or "Operation Mode" section.

6.2 Konfigirasyon san fil

Configure wireless parameters such as SSID, security (WPA2/WPA3), channel, and transmit power. Ensure that the wireless settings are compatible with your client devices or other wireless infrastructure.

• SSID: Set a unique name for your wireless network.
• Sekirite: Enable strong encryption (e.g., WPA2-PSK, WPA2-Enterprise) to protect your wireless network.
• Chèn: For optimal performance, select a clear channel, especially in congested environments. The device supports 5 GHz DFS channels.

6.3 Karakteristik avanse

• AeroMag: Simplifies the deployment and configuration of multiple Moxa wireless devices. Refer to the dedicated AeroMag documentation for detailed instructions.
• Turbo Roaming: Provides fast roaming capabilities for wireless clients, ensuring seamless connectivity during movement. Configure roaming parameters in client mode.
• AeroLink Protection: Enhances network redundancy by providing backup wireless links.
• Network Address Translation (NAT): Configure NAT settings to allow multiple devices on a private network to share a single public IP address.

7. Antretyen

7.1 Netwayaj

Ensure the device is powered off and disconnected from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior of the device. Do not use liquid or aerosol cleaners.

7.2 Mizajou Firmware

Periodically check the Moxa website for the latest firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements.

1. Telechaje dènye firmwèr la file from the official Moxa support websit.
2. Aksè nan aparèy la webkoòdone jesyon ki baze sou.
3. Navigate to the "System Maintenance" or "Firmware Upgrade" section.
4. Follow the on-screen instructions to upload and install the new firmware. Do not power off the device during the update process.

NAN. Depanaj

This section provides solutions to common issues you may encounter with the AWK-3131A-US.

8.1 Pwoblèm pouvwa

• Pa gen LED pouvwa:
  • Check power cable connections to the terminal block or PoE source.
  • Verify the power supply is functioning correctly and providing the correct voltage.

8.2 Pwoblèm koneksyon rezo

• No LAN Link:
  • Ensure Ethernet cables are securely connected.
  • Check the status of the connected network device (switch/router).
  • Verifye entegrite kab la.
• No WLAN Connection:
  • Check if antennas are properly installed.
  • Verify WLAN settings (SSID, security key) on both the AP and client devices.
  • Check the SIGNAL LED for wireless signal strength.
  • Ensure the device is in the correct operating mode (AP, Bridge, Client).

8.3 Aparèy la pa reponn

• Pa Ka Aksè Web Entèfas:
  • Verify your computer's IP address is in the same subnet as the device.
  • Try accessing via the console port.
  • Perform a factory reset if all else fails (refer to the device's advanced manual for reset procedures).

9. Espesifikasyon

Technical specifications for the Moxa AWK-3131A-US.

10. Garanti ak sipò

Moxa products are backed by a standard warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa websit.

For technical support, product documentation, and software downloads, please visit the Moxa support portal:

https://www.moxa.com/support

You may also contact Moxa customer service directly for assistance.