BS Battery BSLi-03

BS Battery BSLi-03 Lithium Battery User Manual

1. Entwodiksyon

This manual provides essential information for the safe and effective use of your BS Battery BSLi-03 Lithium Battery. Designed for high performance and durability, this lithium-ion battery offers significant advantages over traditional lead-acid batteries, including reduced weight, extended service life, and improved cold-start performance. Please read this manual thoroughly before installation and operation.

BS Battery BSLi-03 Lithium Battery

Figi 1: The BS Battery BSLi-03 Lithium Battery, showcasing its compact design and terminal layout.

2. Enfòmasyon sou Sekirite

Your safety is paramount. Observe the following precautions to prevent injury or damage to the battery and equipment.

  • Toujou mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou linèt sekirite ak gan, lè w ap manyen pil.
  • Do not short-circuit the battery terminals. This can cause severe sparks, heat, and potential fire.
  • Do not disassemble, puncture, or modify the battery. Internal components are hazardous.
  • Keep the battery away from open flames, excessive heat, and direct sunlight.
  • Evite lage batri a oswa sibi gwo chòk.
  • Si batri a casing is damaged, discontinue use immediately and dispose of it properly.
  • Do not immerse the battery in water or other liquids. While waterproof, prolonged submersion is not recommended.
  • Dispose of spent batteries according to local regulations. Lithium batteries require special recycling procedures.
  • Pwopozisyon 65 Avètisman: Pwodui sa a ka gen ladan pwodwi chimik yo konnen nan Eta Kalifòni pou lakòz kansè ak domaj nesans oswa lòt domaj repwodiksyon.

3. Pwodwi Features

The BS Battery BSLi-03 Lithium Battery incorporates advanced technology for superior performance:

  • Konsepsyon ki lejè: Up to 70% lighter than traditional lead-acid batteries, improving vehicle handling and performance.
  • Pwolonje lavi sèvis: Offers a significantly longer lifespan and over 2000 charge cycles.
  • Ba pwòp tèt ou-egzeyat: Maintains charge for extended periods, allowing for engine starts even after long periods of inactivity.
  • Chaje rapid: Capable of rapid recharging.
  • Multi-Position Waterproof Design: Can be installed in various orientations (up to 180°) and is resistant to water ingress.
  • Ekolojik-zanmi: Contains no acids or heavy metals, making it non-toxic and environmentally conscious.
  • Segondè Rezistans Chalè: Resistant to temperatures up to 230°C.
  • Pare pou itilize: Plug and play functionality for immediate operation.
  • Impressive Low Temperature Performance: Reliable starting power even in cold conditions.
  • Endikatè eta chaj: Integrated button and LED display to check battery charge level.
BSLi-03 Lithium Battery Features

Figi 2: Visual representation of key features including rapid charging, lightweight, waterproof, and high charge cycles.

4. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your BSLi-03 Lithium Battery. If you are unsure, consult a qualified technician.

  1. Retire ansyen pil la: Disconnect the negative (-) terminal first, then the positive (+) terminal of the old battery. Carefully remove the old battery from its compartment.
  2. Prepare New Battery: Ensure the BSLi-03 battery is clean and free from debris. No liquid filling is required as it is a sealed lithium battery.
  3. Enstale nouvo batri: Place the BSLi-03 into the battery compartment. Secure it firmly to prevent movement during operation.
  4. Konekte Tèminal yo: Connect the positive (+) terminal first, then the negative (-) terminal. Ensure all connections are tight and secure.
  5. Verifye enstalasyon: Double-check all connections and ensure the battery is properly seated.
Metòd ranplasman batri

Figi 3: Step-by-step visual guide for battery replacement, emphasizing correct terminal connection order.

5. Operasyon Enstriksyon

The BSLi-03 Lithium Battery is designed for straightforward operation.

  • Kòmanse motè a: Once installed, the battery is ready to provide power for engine starting.
  • Checking State of Charge: Press the integrated button on the battery to activate the LED indicator, which displays the current charge level.
BSLi-03 Battery with State of Charge Indicator

Figi 4: The BSLi-03 battery showing its dimensions and the location of the state of charge indicator button.

6. Antretyen

Minimal maintenance is required for the BSLi-03 Lithium Battery due to its advanced design.

  • Enspeksyon regilye: Periodically check the battery terminals for corrosion and ensure connections remain tight.
  • Netwayaj: Keep the battery surface clean and dry. Use a damp twal si sa nesesè.
  • Chaje: While the battery has a low self-discharge rate, if the vehicle is stored for extended periods, occasional charging with a compatible lithium battery charger is recommended to maintain optimal performance. Do not use chargers designed for lead-acid batteries unless they have a specific lithium mode.
  • Depo alontèm: For optimal longevity, store the battery in a cool, dry place. The battery can maintain a charge for up to 12 months without use, allowing for engine start if stored at appropriate temperatures (10-25°C).

NAN. Depanaj

If you encounter issues with your BSLi-03 Lithium Battery, consider the following:

  • Motè a pa demarre:
    • Tcheke koneksyon batri yo pou wè si yo sere epi si gen korozyon.
    • Verify the battery's state of charge using the indicator button. If low, recharge the battery.
    • Ensure the vehicle's charging system is functioning correctly.
  • Batri pa kenbe chaj:
    • Confirm you are using a compatible lithium battery charger.
    • Inspect for any parasitic drains on the vehicle's electrical system.
    • If the battery is old, its capacity may have naturally diminished over time.
  • Odè oswa anflamasyon dwòl: Immediately disconnect the battery and cease use. This indicates a serious internal issue. Contact support for guidance.

Si etap depanaj yo pa rezoud pwoblèm nan, kontakte sèvis kliyan.

8. Espesifikasyon

Key technical specifications for the BS Battery BSLi-03 Lithium Battery:

SpesifikasyonValè
Nimewo ModèlBSLi-03
Voltage12V
Capacity (WH)36 Wh
CCA (Cold Cranking). Amps)210 A
Capacity (Ah, 10Hr)3 Ah
Dimansyon (L x W x H)134 mm x 65 mm x 92 mm
Pwa atik2.2 liv (apeprè 1 kg)
Kalite tèminalNwa & Boulon
Nimewo Pati ManifaktiBSLi-03/HJB9Q-FP/12N9-4B-1
BSLi-03 Specifications Table

Figi 5: Detailed specifications and compatibility chart for the BSLi-03 battery.

9. Garanti ak sipò

Your BS Battery BSLi-03 Lithium Battery comes with a comprehensive warranty to ensure your peace of mind.

  • Peryòd garanti: The BSLi-03 Lithium Battery is covered by a 2-ane garanti soti nan dat acha a. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.
  • Reklame garanti: In the event of a warranty claim, please retain your proof of purchase and contact the retailer or BS Battery customer support.
  • Eksklizyon: The warranty does not cover damage caused by improper installation, misuse, neglect, unauthorized modifications, or normal wear and tear.
BSLi-03 Warranty and Longevity Information

Figi 6: Information highlighting the 2-year warranty, flexible mounting angle, and potential lifespan of up to 8 years with proper use.

For further assistance or technical support, please refer to the contact information provided by your retailer or visit the official BS Battery websit.

Dokiman ki gen rapò - BSLi-03

Preview Pil BS SLA ak SLA MAX: Manyèl Enstriksyon ak Gid Swen
Gid konplè pou pil seri BS Battery SLA ak SLA MAX. Aprann sou itilizasyon, enstalasyon, chaje ak antretyen san danje pou pil ou yo ki aktive nan faktori epi ki sele san antretyen.
Preview BS Battery Powersport Solutions Catalog: Batteries, Chargers, Boosters, Testers
Comprehensive catalog from BS Battery showcasing their extensive range of powersport batteries (Lithium, SLA, MF, Dry), smart chargers, boosters, testers, and dealer tools. Featuring technical specifications, product features, and global racing partnerships.
Preview BS Battery Lithium & Lithium Max Battery Instruction Manual
Comprehensive instruction manual for BS Battery Lithium and Lithium Max batteries, covering features, precautions, charging, installation, usage, storage, transportation, warranty, and disclaimer. Includes detailed specifications and guidelines for optimal performance and longevity.
Preview BS Battery Instruction Manual for Robot Batteries
Comprehensive safety instructions, precautions, installation, storage, and disposal guidelines for BS Battery robot batteries. Learn how to properly use and maintain your robot battery.
Preview BS BATTERY SLA & Lithium Battery Charging and Maintaining Instruction Guide
This guide from BS BATTERY provides comprehensive instructions for the charging and maintenance of SLA and Lithium batteries. It covers technical characteristics, safety precautions for charging rooms and personnel, typical installation examples, charger specifications, battery stock management, and detailed procedures for putting batteries on charge and removing them. It also includes technical data reference guides and troubleshooting information for BS10, BS15, BS30, and BS60 chargers.
Preview BS BATTERY SLA & Lithium Battery Charging and Maintenance Guide | Best Practices & Charger Specs
Comprehensive instruction guide from BS BATTERY on safely charging and maintaining SLA and Lithium batteries. Covers technical concepts, precautions, installation, charger specifications (BS10, BS15, BS30, BS60), stock management, and troubleshooting.