Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of the Moxa EDS-205 5-Port Entry-Level Unmanaged Ethernet Switch. Designed for industrial applications, this switch offers reliable 10/100BaseT(X) Ethernet connectivity in a compact, durable plastic housing.
Pwodwi souview
Figi 1: Moxa EDS-205 5-Port Unmanaged Ethernet Switch. This image displays the front and side of the switch, highlighting its five Ethernet ports, power input, and product label with model information.
The Moxa EDS-205 is an unmanaged Ethernet switch featuring five 10/100BaseT(X) ports with RJ45 connectors. It supports IEEE802.3/802.3u/802.3x standards and includes broadcast storm protection. Its robust plastic housing and DIN-rail mounting capability make it suitable for various industrial environments.
Enstalasyon ak Enstalasyon
1. Pake kontni
- Moxa EDS-205 Ethernet Switch
- (Electricité pa enkli)
- Dokimantasyon (manyèl sa a)
2. Monte switch la
The EDS-205 is designed for DIN-rail mounting, providing a secure and space-efficient installation in industrial control cabinets. Ensure the mounting surface is stable and free from excessive vibration.
- Attach the DIN-rail clip (if not pre-attached) to the rear of the switch.
- Hook the top of the DIN-rail clip over the top edge of the DIN-rail.
- Press the bottom of the switch firmly against the DIN-rail until it clicks into place.
3. Koneksyon pouvwa
The EDS-205 requires a 24 VDC power input (power supply not included). Connect a compatible power supply to the terminal block located on the top of the switch.
- Opere Voltage: 24 Vòlt (DC)
- Rating aktyèl: 0.11 Amps
- Wattage: 5.28 wat
Ensure the power supply is properly grounded and provides stable voltage within the specified range to prevent damage to the device.
4. Koneksyon Ethernet
Connect your network devices (e.g., computers, servers, other switches) to the RJ45 Ethernet ports on the front panel of the EDS-205 using standard Ethernet cables (Cat5e or Cat6 recommended).
- The switch features five 10/100BaseT(X) ports.
- Each port supports auto-negotiation for speed and duplex mode.
- Auto MDI/MDI-X functionality eliminates the need for crossover cables.
Enstriksyon Operasyon
The Moxa EDS-205 is an unmanaged switch, meaning it operates without requiring any configuration. Simply connect your devices, and the switch will automatically handle data forwarding.
Endikatè ki ap dirije
The switch features LED indicators to provide status information:
- Power LED (P): Illuminates when the switch is receiving power.
- LED Lyen/Aksyon (pa pò):
- Solid vèt: Indicates a valid network link is established.
- Vèt flache: Indicates data activity (transmitting or receiving) on the port.
- Off: No network link or device connected.
Karakteristik kle
- Plug-and-Play: No software configuration required.
- Oto-negosyasyon: Automatically detects and adjusts to the network speed (10 or 100 Mbps) and duplex mode (half or full) of connected devices.
- Oto MDI/MDI-X: Automatically detects the type of Ethernet cable (straight-through or crossover) and adjusts accordingly.
- Broadcast Storm Protection: Prevents network congestion caused by excessive broadcast traffic.
Antretyen
The Moxa EDS-205 is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Netwayaj: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid or aerosol cleaners.
- Kondisyon anviwònman: Ensure the operating environment remains within the specified temperature range (-10 to 60°C) and humidity levels. Avoid exposing the switch to direct sunlight, excessive heat, or moisture.
- Entegrite kab: Periodically inspect Ethernet cables for damage or loose connections.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen okenn endikasyon LED pouvwa | No power supply connected or power failure. | Verify the power supply is correctly connected and functioning. Check power source. |
| Link/Act LED is off | No device connected, faulty cable, or device is off. | Ensure the Ethernet cable is securely connected to both the switch and the device. Check the device's power and network status. Try a different cable. |
| Ralanti vitès rezo a | Cable quality, network congestion, or device limitations. | Use Cat5e or Cat6 cables. Check for excessive network traffic. Ensure connected devices support 100 Mbps. |
Espesifikasyon
| Karakteristik | Deskripsyon |
|---|---|
| Modèl | EDS-205 |
| Pò | 5 x 10/100BaseT(X) RJ45 ports |
| Estanda | IEEE802.3/802.3u/802.3x |
| Operasyon Mode | San jere |
| Opere Voltage | 24 Vòlt (DC) |
| Rating aktyèl | 0.11 Amps |
| Wattage | 5.28 wat |
| Materyèl Lojman | Plastik |
| Montaj | DIN-ray |
| Tanperati Fonksyònman | -10 a 60 ° C |
| Rating Pwoteksyon Entènasyonal | IP30 |
| Dimansyon pwodwi (L x W x H) | 2.9 x 1 x 3.9 pous |
| Pwa atik | 7.4 ons |
Garanti ak sipò
For warranty information and technical support, please refer to the official Moxa website or contact your local Moxa distributor. Keep your purchase receipt for warranty claims.
Resous sou entènèt: www.moxa.com
