MOXA NPort IA5250A-T Industrial Automation Device Server User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the MOXA NPort IA5250A-T Industrial Automation Device Server. This device is designed to connect serial devices to an Ethernet network, enabling remote access and management in industrial environments. It features robust surge protection for serial, LAN, and power connections, ensuring reliable operation in demanding conditions.

2. Pwodwi souview

The MOXA NPort IA5250A-T is a 2-port industrial device server that converts serial signals (RS-232/422/485) to Ethernet. It is equipped with two 10/100BaseT(X) Ethernet ports, allowing for network redundancy or daisy-chaining. Its design emphasizes durability and reliability, making it suitable for a wide range of industrial automation applications.

Figi 1: Devan view of the MOXA NPort IA5250A-T device server, showing the two Ethernet ports and two serial (DB9) ports, along with LED indicators and the MOXA branding. A green terminal block for power input is visible at the top.

3. Karakteristik

• 2 Pò Seri: Supports RS-232, RS-422, and RS-485 communication standards.
• Pò Ethernet doub: Two 10/100BaseT(X) Ethernet ports for network connectivity, supporting single IP mode.
• Industrial Grade Protection: Built-in serial, LAN, and power surge protection.
• Wide Tanperati Fonksyònman: Designed for operation in extreme temperatures ranging from -40°C to 75°C.
• Industrial Certifications: Suitable for harsh industrial environments.
• Konfigirasyon fasil: Web-based console for straightforward setup and management.

4. Pake kontni

Verifye ke pake ou a gen atik sa yo:

• MOXA NPort IA5250A-T Device Server
• Power Adapter (if included with specific model variant)
• Gid Enstalasyon Rapid
• Documentation CD/DVD (or link to online resources)
• DIN-ray twous aliye

If any of these items are missing or damaged, please contact your sales representative for assistance.

5. Enstalasyon

5.1 Enstalasyon Fizik

The NPort IA5250A-T can be mounted on a DIN-rail or wall-mounted.

• Montaj DIN-Rail: Attach the DIN-rail mounting kit to the back of the device. Securely clip the device onto a standard DIN-rail.
• Montaj mi: Use the provided wall-mounting plates (if applicable) to secure the device to a flat surface using screws.

5.2 Koneksyon pouvwa

Connect a compatible DC power source (typically 12-48 VDC) to the terminal block located at the top of the device. Ensure correct polarity. The device features power input redundancy for enhanced reliability.

5.3 Rezo Koneksyon

Connect one or both 10/100BaseT(X) Ethernet ports to your network switch or router using standard Ethernet cables. The device supports auto MDI/MDI-X, so straight-through or crossover cables can be used.

5.4 Serial Device Connection

Connect your serial devices (e.g., PLCs, sensors, meters) to the DB9 serial ports on the NPort IA5250A-T. Ensure the correct pin assignments for RS-232, RS-422, or RS-485 are used. Refer to the device's pinout diagram in the detailed product documentation for specific wiring instructions.

5.5 Inisyal Konfigirasyon

After physical installation and power-up, the device can be configured via a web browser or MOXA's NPort Windows utility.

• Web Konsole: Louvri a web browser and enter the device's default IP address (refer to the Quick Installation Guide or product documentation for the default IP). Log in with the default username and password.
• NPort Windows Utility: Install the NPort Windows utility on a PC connected to the same network. The utility can discover the device and allow for configuration.

Configure network settings (IP address, subnet mask, gateway), serial port parameters (baud rate, data bits, parity, stop bits), and operation modes (e.g., Real COM, TCP Server, TCP Client, UDP).

6. Operasyon Enstriksyon

6.1 Endikatè ki ap dirije

The NPort IA5250A-T features several LED indicators to display its status:

• PWR1/PWR2: Indicates power status for redundant power inputs. Lit when power is supplied.
• Pare: Lit when the device is powered on and operating normally.
• LAN Link/Act: Indicates Ethernet link status and activity.
• Serial Tx/Rx: Flashes to indicate data transmission (Tx) or reception (Rx) on the respective serial port.

6.2 Kominikasyon rezo

Once configured, the NPort IA5250A-T facilitates communication between your serial devices and network applications. Depending on the configured operation mode, serial data can be transmitted over TCP/IP or UDP/IP.

6.3 Serial Port Modes

The device supports various serial port operating modes, including:

• Real COM Mode: Allows Windows/Linux hosts to access serial devices over Ethernet as if they were directly connected to a local COM port.
• TCP Server/Client Mode: Establishes TCP connections for data exchange.
• UDP Mode: Uses UDP for connectionless data transmission.
• Pair Connection Mode: Creates a transparent serial-to-serial connection over Ethernet between two NPort devices.

7. Antretyen

7.1 Netwayaj

Periodically clean the exterior of the device with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.

7.2 Mizajou Firmware

Check the MOXA website regularly for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package for safe updating.

7.3 Konsiderasyon Anviwònman

Ensure the device operates within its specified temperature and humidity ranges. Avoid exposing the device to excessive dust, moisture, or direct sunlight.

NAN. Depanaj

If you encounter issues with your NPort IA5250A-T, refer to the following common troubleshooting steps:

• Pa gen pouvwa: Check the power connections and ensure the power supply is functioning. Verify PWR1/PWR2 LEDs are lit.
• Pa gen koneksyon rezo: Check Ethernet cable connections. Verify LAN Link/Act LEDs. Ensure network settings (IP address, subnet mask) are correct.
• Serial Communication Errors: Verify serial cable connections and pinouts. Check serial port parameters (baud rate, data bits, parity, stop bits) match the connected device. Ensure the correct serial operating mode is configured.
• Aparèy pa reponn: Try power cycling the device. If the issue persists, consider performing a factory reset (refer to the detailed product manual for reset procedures).

For more advanced troubleshooting or persistent issues, consult the full product manual available on the MOXA website or contact MOXA technical support.

9. Espesifikasyon

10. Garanti ak sipò

MOXA products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your product or visit the official MOXA websit.

For technical support, product documentation, drivers, and firmware updates, please visit the MOXA official websit oswa kontakte ekip sipò kliyan yo.

• MOXA Official Websit: www.moxa.com
• Kontakte sipò: Gade nan website for regional support contact information.