Parkside PDOS 200 C2 Upute za uporabu dvostruke brusilice

1. Proizvod je gotovview

The Parkside PDOS 200 C2 Double Grinder is a versatile power tool designed for grinding, sharpening, deburring, and derusting various metal and steel workpieces. It features a quiet, maintenance-free induction motor and two grinding wheels for both coarse and fine applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

Slika 1.1: The Parkside PDOS 200 C2 Double Grinder. This image shows the complete unit from a slight angle, highlighting its two grinding wheels, protective covers, and the central motor housing with the power switch.

2. Sigurnosne upute

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili strujni udar, požar i ozbiljne ozljede.

• Pročitajte priručnik: Before operating the grinder, read and understand all instructions and safety warnings.
• Osobna zaštitna oprema (PPE): Always wear safety glasses or a face shield, hearing protection, and appropriate work gloves.
• Radno područje: Keep the work area clean, well-lit, and free from clutter. Ensure adequate ventilation.
• Električna sigurnost: Ensure the power supply matches the grinder's specifications. Do not operate in damp ili vlažnim uvjetima.
• Osigurajte radni komad: Always hold the workpiece firmly against the work rest.
• Maintain Guards: Never operate the grinder without the protective covers and spark guards properly installed and adjusted.
• Izbjegavajte pretjerivanje: Održavajte pravilan položaj i ravnotežu u svakom trenutku.
• Isključite kada se ne koristi: Disconnect the grinder from the power supply before making adjustments, changing accessories, or when not in use.
• Provjerite prije upotrebe: Provjerite ima li oštećenih dijelova, nepravilnog poravnanja ili bilo kakvog stanja koje bi moglo utjecati na rad.

3. Sadržaj paketa

Carefully unpack all items and check for completeness. If any parts are missing or damaged, contact customer support.

• Parkside PDOS 200 C2 Double Grinder unit
• 1x Coarse grinding wheel (Grit 36)
• 1x Fine grinding wheel (Grit 80)
• 2x Spark protection glasses
• 2x Work rests
• Mounting hardware (if applicable for bench mounting)
• Priručnik s uputama

4. Postavljanje

4.1 Bench Mounting

For stable and safe operation, the double grinder should be securely mounted to a workbench. Use appropriate bolts and nuts (not always included) to fasten the grinder through the mounting holes in its base.

4.2 Installing Spark Protection Glasses and Work Rests

1. Attach the spark protection glasses to the designated brackets above each grinding wheel. Ensure they are securely fastened and positioned to protect your eyes from sparks and debris.
2. Install the work rests in front of each grinding wheel. Adjust their position so that the gap between the work rest and the grinding wheel is no more than 2 mm. This gap should be maintained as the wheel wears down. The work rests are tool-free adjustable.

Slika 4.1: Ispred view of the grinder, showing the spark protection glasses and adjustable work rests in position. The image also depicts sparks generated during grinding, illustrating the function of the protective elements.

4.3 Priključak za napajanje

Connect the power cable to a suitable electrical outlet. Ensure the power switch is in the "OFF" position before plugging in the unit.

5. Upute za rad

5.1 Uključivanje/isključivanje

• To turn on the grinder, press the dust-protected ON (I) switch.
• To turn off the grinder, press the OFF (O) switch.
• Allow the grinding wheels to reach full speed before beginning work.

5.2 Tehnike brušenja

The PDOS 200 C2 features two grinding wheels:

• Coarse Grinding Wheel (Grit 36): Use for rapid material removal, shaping, and initial sharpening of dull tools.
• Fine Grinding Wheel (Grit 80): Use for finishing, fine sharpening, and deburring.

When grinding:

1. Always wear appropriate PPE.
2. Čvrsto držite radni komad uz oslonac za radni komad.
3. Apply light, even pressure. Excessive pressure can damage the wheel or motor.
4. Move the workpiece across the face of the wheel to ensure even wear.
5. Avoid grinding on the side of the wheel, as this can cause the wheel to break.
6. For sharpening, maintain a consistent angle against the wheel.
7. Allow the workpiece to cool periodically to prevent overheating and damage to the material.

6. Održavanje

Redovito održavanje osigurava dugotrajnost i siguran rad vaše brusilice.

• Čišćenje: Disconnect from power. Use a brush or compressed air to remove dust and debris from the motor housing and around the wheels.
• Pregled kotača: Regularly inspect grinding wheels for cracks, chips, or excessive wear. Replace damaged or worn wheels immediately.
• Prilagodba odmora tijekom rada: Ensure the gap between the work rest and the grinding wheel remains at a maximum of 2 mm. Adjust as the wheel wears.
• Spark Guard Inspection: Check spark protection glasses for cracks or excessive scratching that may impair visibility. Replace if necessary.
• Motor: The induction motor is maintenance-free and does not require lubrication.

7. Rješavanje problema

8. Specifikacije

9. Jamstvo i podrška

Ovaj proizvod dolazi sa standardnim jamstvom proizvođača. Za specifične uvjete i odredbe pogledajte jamstveni list koji ste dobili uz kupnju. Za tehničku podršku, rezervne dijelove ili reklamacije u okviru jamstva obratite se prodavaču ili odjelu za korisničku podršku proizvođača.

Sačuvajte račun kao dokaz o kupnji u svrhu jamstva.