SSK DK103 Dual Bay USB 3.0 SATA Hard Drive Docking Station User Manual

1. Uvod

The SSK DK103 is an aluminum dual-bay docking station designed for 2.5-inch and 3.5-inch SATA I/II/III HDDs and SSDs. It features USB 3.0 connectivity with UASP support for fast data transfers and includes an offline cloning/duplicator function, allowing you to duplicate hard drives without a computer connection. This manual provides detailed instructions for setup, operation, and maintenance of your docking station.

Figure 1: SSK DK103 Dual Bay Hard Drive Docking Station

2. Sadržaj paketa

Molimo provjerite jesu li svi artikli prisutni u paketu:

• 1x SSK DK103 Dual Bay Docking Station
• 1x USB 3.0 kabel
• 1x 12V/3A strujni adapter
• 1x korisnički priručnik

3. Proizvod je gotovview

The SSK DK103 features a durable aluminum alloy shell for efficient heat dissipation and includes various ports and indicators for ease of use.

Figure 2: Rear Panel Connections (DC Port, USB 3.0 Port, Power Switch)

Komponente:

• Drive Bays (A & B): Slots for inserting 2.5-inch or 3.5-inch SATA HDDs/SSDs.
• Gumb za napajanje: Controls the power supply to the docking station.
• Clone Button: Initiates the offline cloning process.
• LED indikatori: Display power status, drive activity, and cloning progress (25%, 50%, 75%, 100%).
• USB 3.0 priključak: Connects the docking station to your computer for data transfer.
• DC-12V Power Input: Spaja se na priloženi adapter za napajanje.
• Anti-skid Footpads: Smješten na dnu radi stabilnosti.

4. Upute za postavljanje

4.1 Instaliranje tvrdih diskova

1. Provjerite je li priključna stanica isključena i odvojena od računala.
2. Gently insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the drive bays (A and/or B) until it is securely seated. Ensure the SATA connector aligns correctly.

Figure 3: Inserting Hard Drives

4.2 Spajanje na napajanje i računalo

1. Connect the 12V/3A power adapter to the DC-12V input port on the docking station and then plug it into a power outlet.
2. Connect the included USB 3.0 cable from the docking station's USB 3.0 port to an available USB port on your computer.
3. Press the power button on the docking station to turn it on. The LED indicators will illuminate.
4. Your computer should automatically detect the connected drives. For new drives, you may need to initialize and format them through your operating system's Disk Management utility before use.

5. Upute za rad

5.1 Data Transfer (Connected to Computer)

When connected to a computer via USB 3.0, the docking station functions as an external drive enclosure. Drives inserted into the bays will appear as separate drives on your computer.

• Provjerite je li priključna stanica uključena i spojena na računalo.
• Access the drives through your computer's file Explorer (Windows) ili Finder (macOS).
• Povucite i ispustite files to transfer data between your computer and the inserted drives, or between the two inserted drives.
• The docking station supports UASP (USB Attached SCSI Protocol) for enhanced data transfer speeds, up to 5Gbps, when connected to a UASP-enabled USB 3.0 port.

Figure 4: UASP Protocol for Faster Data Transfers

5.2 Offline Cloning/Duplication

The offline cloning function allows you to duplicate data from a source drive (Disk A) to a target drive (Disk B) without a computer connection.

Important Considerations Before Cloning:

• The target drive (Disk B) must have a capacity equal to or larger than the source drive (Disk A).
• Ensure both source and target drives are functioning correctly.
• All existing data on the target drive (Disk B) will be erased during the cloning process. If you need to save data from Disk B, transfer it to another location before cloning.
• Do not unplug drives directly during the cloning process. Wait for the completion notification.

Koraci kloniranja:

1. Ensure the docking station is powered off and disconnected from any computer.
2. Insert the source drive (the drive you want to copy FROM) into Bay A.
3. Insert the target drive (the drive you want to copy TO) into Bay B.
4. Press and hold the Clone button for approximately 3-5 seconds until the LED indicators begin to flash.
5. Release the Clone button. The cloning process will begin.
6. LED indikatori (25%, 50%, 75%, 100%) će se sekvencijalno paliti kako bi prikazali napredak kloniranja.
7. Once all LED indicators are solid (100%) and you hear three 'bang' noises, the cloning process is complete.
8. Press the power button to turn off the docking station before removing the drives.

Slika 5: Postupak kloniranja izvan mreže

6. Kompatibilnost

The SSK DK103 docking station is compatible with a wide range of operating systems and devices:

• Operativni sustavi: Windows XP / Vista / 7 / 8 / 8.1 / 10, macOS 10.4 to 10.11, Linux Kernel 2.4.2 or greater.
• Hard Drive Types: All 2.5-inch and 3.5-inch SATA I/II/III HDDs and SSDs.
• Maksimalni kapacitet: Supports up to 2x16TB (32TB total) hard drives.
• Kompatibilni uređaji: Desktop computers, laptops, smartphones (with appropriate adapters, not included), tablets (with appropriate adapters, not included), televisions (for media playback).

Slika 6: Nprample Usage with a Gaming Console

Slika 7: Nprample Usage with a Smart TV

7. Održavanje

To ensure optimal performance and longevity of your SSK DK103 docking station:

• Uređaj držite u čistom, suhom okruženju, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
• Izbjegavajte ispuštanje ili izlaganje uređaja jakim udarcima.
• Vanjski dio očistite mekom, suhom krpom. Nemojte koristiti tekuća sredstva za čišćenje ili otapala.
• Ensure proper ventilation around the device, especially when multiple drives are in use.

8. Rješavanje problema

Uobičajeni problemi i rješenja:

• Računalo nije prepoznalo diskove:
  • Ensure the docking station is powered on and the USB cable is securely connected to both the docking station and the computer.
  • Verify that the hard drives are properly seated in the bays.
  • Pokušajte se spojiti na drugi USB priključak na računalu.
  • For new drives, check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the drive.
  • Test the drives directly in a computer or another enclosure to confirm they are functional.
• Offline cloning fails or does not start:
  • Prije pokretanja kloniranja provjerite je li priključna stanica isključena iz računala.
  • Confirm the target drive (Disk B) capacity is equal to or larger than the source drive (Disk A).
  • Ensure both drives are properly inserted and functional.
  • Press and hold the Clone button for the specified duration (3-5 seconds).
• Male brzine prijenosa podataka:
  • Ensure you are using a USB 3.0 port on your computer. USB 2.0 ports will operate at slower speeds.
  • Verify that your computer's USB 3.0 port supports UASP for optimal performance.
  • The actual speed depends on the hard drive's performance. SSDs will be faster than HDDs.

9. Specifikacije

10. Sigurnosne informacije

Molimo pridržavajte se sljedećih sigurnosnih smjernica:

• Use only the provided 12V/3A power adapter. Using an incorrect adapter may damage the device or cause a fire.
• Ne izlažite uređaj vodi ili prekomjernoj vlazi.
• Avoid disassembling the device. This will void the warranty and may cause damage.
• Protect your data: Always safely eject drives from your computer before disconnecting the USB cable or powering off the docking station.
• During offline cloning, ensure the process is complete before removing drives. Premature removal can lead to data corruption.
• The docking station includes built-in protections against overcurrent, overvoltage, short circuits, and leakage to ensure safe operation.

Figure 8: Power Protection Features

11. Jamstvo i podrška

SSK products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official SSK webstranicu za detaljne uvjete jamstva.

For technical support, product inquiries, or warranty claims, please contact SSK customer service through their official channels. Contact information can usually be found on the SSK webmjestu ili na pakiranju proizvoda.