Cudy LT300 4G LTE Wi-Fi Router User Manual

1. Uvod

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. Sadržaj paketa

Molimo pažljivo provjerite sadržaj paketa. Ako bilo koji predmet nedostaje ili je oštećen, obratite se prodavaču.

• Cudy LT300 4G LTE Wi-Fi Router
• Adapter napajanja
• Ethernet kabel
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• Vodič za brzu instalaciju

3. Proizvod je gotovview

3.1. Hardverske komponente

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

Slika 1: Ispred view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• LED za napajanje: Označava status napajanja.
• Wi-Fi LED: Označava status Wi-Fi mreže.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LAN/WAN LED diode: Označava aktivnost Ethernet porta.

Slika 2: Stražnji view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• Priključak za napajanje: Spojite isporučeni strujni adapter.
• LAN/WAN portovi: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• Utor za SIM karticu: Ovdje umetnite svoju 4G LTE SIM karticu.
• Gumb WPS/Reset: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Antenski konektori: Connect the detachable LTE antennas.

4. Postavljanje

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. Umetnite SIM karticu

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. Provjerite je li ruter isključen.
2. Pronađite utor za SIM karticu na stražnjoj ploči.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

Slika 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. Uključite

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. Konfiguracija

5.1. Pristup Web Upravljačko sučelje

To configure your router, you need to access its web-sučelje za upravljanje.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. Otvori a web preglednik (npr. Chrome, Firefox, Edge).
3. Upišite zadanu IP adresu 192.168.10.1 u adresnu traku i pritisnite Enter.
4. Enter the default login credentials. The default username is admin a zadana lozinka je admin (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• SSID (naziv mreže): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• Sigurnosni način rada: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. Operativni

6.1. Povezivanje uređaja

• Wi-Fi: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• Ethernet: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. LED indikatori

Pratite LED indikatore na prednjoj ploči kako biste razumjeli status usmjerivača:

• LED za napajanje: Solid Green (On), Off (Off).
• Wi-Fi LED: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LAN/WAN LED diode: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. Održavanje

7.1. Ažuriranje firmvera

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official webmjesto.

1. Preuzmite najnoviji firmware file for your LT300 model.
2. Pristupite web sučelje za upravljanje.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. Učitajte preuzeti firmware file and follow the on-screen instructions. Do not power off the router during the upgrade process.

7.2. Vraćanje na tvorničke postavke

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• Otpustite gumb. Ruter će se ponovno pokrenuti s tvorničkim postavkama.

8. Rješavanje problema

• Nema internetske veze:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Provjerite jesu li postavke APN-a ispravne u web sučelje.
  • Ponovno pokrenite ruter i povezane uređaje.
• Ne mogu pristupiti Web Upravljačko sučelje:
  • Provjerite je li vaš uređaj povezan s Wi-Fi mrežom usmjerivača ili putem Etherneta.
  • Provjerite IP adresu 192.168.10.1 je ispravno upisano.
  • Pokušajte drugačije web preglednik.
  • Perform a factory reset if you forgot the login password.
• Spora brzina Wi-Fi-ja:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • Smanjite broj povezanih uređaja ili aktivnosti koje intenzivno koriste propusnost.
  • Consider changing the Wi-Fi channel in the web sučelje.

9. Specifikacije

10. Sigurnosne informacije

• Ne izlažite uređaj vodi ili vlazi.
• Ne pokušavajte sami rastaviti ili popraviti uređaj.
• Koristite samo isporučeni strujni adapter.
• Držite uređaj dalje od izvora topline i izravne sunčeve svjetlosti.
• Osigurajte odgovarajuću ventilaciju oko uređaja.

11. Jamstvo i podrška

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.