1. Uvod
Thank you for choosing the Everbeam H6 Pro LED Headlamp. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device. Please read it thoroughly before operation and retain it for future reference.
Image 1.1: Everbeam H6 Pro Headlamp with included accessories (USB cable and storage case).
2. Proizvod je gotovview
2.1 Ključne značajke
- Svjetlina od 650 lumena: Provides powerful illumination up to 126 meters (413 feet).
- Više načina svjetla: Includes two white light brightness levels, SOS mode, and a red light mode.
- Kontrola senzora pokreta: Allows hands-free operation by waving your hand in front of the sensor.
- Punjiva baterija: Built-in 1200mAh lithium-ion battery offers extended runtime.
- Izdržljiv dizajn: IPX4 water resistance for protection against splashes and light rain.
- Lagan i kompaktan: Weighs approximately 72g (2.5oz) for comfortable wear.
2.2 Komponente
- Everbeam H6 Pro Headlamp
- Adjustable Elastic Headband
- USB kabel za punjenje
- Kutija za pohranu
Slika 2.1: Zaglavljeamp and its accessories, highlighting the 1200mAh battery capacity.
2.3 Kontrole i indikatori
Slika 2.2: Detaljno view od glavelamp's controls and features.
- Gumb za napajanje / način rada: Controls power and cycles through white light modes.
- Sensor Button: Activates/deactivates motion sensor control.
- Senzori pokreta: Detects hand gestures for hands-free operation.
- White Light LED: Main illumination source.
- Red Light LEDs: Provides low-impact illumination, ideal for night vision preservation.
- USB priključak za punjenje: Za ponovno punjenje unutarnje baterije.
- Indikator napajanja: Prikazuje stanje baterije.
3. Postavljanje
3.1 Početna naplata
- Prije prve upotrebe, potpuno napunite glavuamp.
- Connect the supplied USB charging cable to the headlamp's USB charging port.
- Plug the other end of the cable into a standard USB power source (e.g., computer, wall adapter).
- The power indicator will show charging status (e.g., red for charging, green for fully charged).
- Potpuno punjenje obično traje otprilike 3 sata.
3.2 Podešavanje trake za glavu
Image 3.1: The adjustable and comfortable elastic headband.
- Stavite glavulamp na tvojoj glavi.
- Adjust the elastic strap using the buckles on either side to achieve a snug yet comfortable fit.
- Headlamp unit can be tilted up to 60 degrees to direct the light beam as needed.
4. Upute za rad
4.1 Uključivanje/isključivanje i načini rada svjetla
- Upaliti: Press the Power/Mode button once. The headlamp will activate in the last used white light mode.
- To Change White Light Modes: Press the Power/Mode button repeatedly to cycle through High White Light, Low White Light, and SOS White Light.
- Za aktiviranje crvenog svjetla: From any white light mode, press and hold the Power/Mode button for approximately 2 seconds. The headlamp will switch to Red Light mode.
- To Change Red Light Modes: In Red Light mode, press the Power/Mode button once to switch between steady Red Light and Red Strobe.
- Isključiti: Press the Power/Mode button until the light turns off, or press and hold the Power/Mode button for 2 seconds from any mode.
Slika 4.1: Zaglavljeamp providing 650 lumens of illumination in a dark environment.
4.2 Motion Sensor Control
The motion sensor allows for convenient hands-free operation, ideal when your hands are occupied.
- Za aktiviranje načina rada senzora: S glavomamp on, press the Sensor button once. The sensor indicator light will illuminate.
- To Use Sensor Control: Wave your hand approximately 4-10 cm (1.5-4 inches) in front of the headlamp za paljenje ili gašenje svjetla.
- To Deactivate Sensor Mode: Press the Sensor button again. The sensor indicator light will turn off.
Image 4.2: Demonstrating motion sensor use for hands-free operation.
5. Održavanje
5.1 Čišćenje
- Obrišite glavuamp tijelo s mekim, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
- Ensure the USB charging port cover is securely closed to maintain water resistance.
5.2 Njega baterija
- Za produljenje vijeka trajanja baterije, napunite glavuamp regularly, even if not used frequently.
- Izbjegavajte potpuno pražnjenje baterije prije ponovnog punjenja.
- Spremite glavuamp na hladnom i suhom mjestu kada se ne koristi.
5.3 Skladištenje
- Spremite glavuamp in its provided case to protect it from dust and physical damage.
- Držati dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
6. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Headlamp se ne uključuje. | Prazna baterija. | Napunite glavuamp potpuno. |
| Svjetlo je slabo ili treperi. | Prazna baterija. | Napunite glavuamp. |
| Senzor pokreta ne reagira. | Sensor mode not activated. Obstruction in front of sensor. | Ensure sensor mode is active (indicator light on). Clear any obstructions. Ensure hand is within 4-10 cm range. |
| Headlamp ne puni se. | Neispravan kabel ili izvor napajanja. | Try a different USB cable or power adapter. Ensure cable is securely connected. |
7. Specifikacije
| Značajka | Detalj |
|---|---|
| Model | H6 Pro |
| Brightness (White Light) | 650 lumena |
| Udaljenost zraka | Do 126 metara (413 stope) |
| Vrsta baterije | Built-in 1200mAh Lithium-Ion |
| Runtime (White Light High) | cca. 2.5 sati |
| Runtime (White Light Low) | cca. 6.5 sati |
| Vrijeme izvođenja (crveno svjetlo) | Do 20 sati |
| Vrijeme punjenja | cca. 3 sati |
| Vodootpornost | IPX4 (otporan na prskanje) |
| Težina | 72 g (2.5 oz) |
| Materijal | Plastični |
| Dimenzije | 3.15"D x 2.37"Š x 0.79"V |
Slika 7.1: Zaglavljeamp's IPX4 water resistance.
8. Jamstvo i podrška
8.1 Informacije o jamstvu
The Everbeam H6 Pro LED Headlamp dolazi s a Jamstvo 2 godine od datuma kupnje. Ovo jamstvo pokriva nedostatke u proizvodnji i izradi pri normalnoj uporabi. Ne pokriva štetu uzrokovanu nepravilnom upotrebom, nezgodama, neovlaštenim preinakama ili normalnim habanjem.
8.2 Korisnička podrška
For technical assistance, warranty claims, or any questions regarding your Everbeam H6 Pro Headlamp, please contact Everbeam customer support through the retailer's platform or the official Everbeam website. Please have your purchase receipt and product model number (H6 Pro) available when contacting support.
