Uvod
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Friedrich PDE09K3SG 42-inch Packaged Terminal Air Conditioner. Please read this manual thoroughly before using the unit and retain it for future reference.
Figure 1: Friedrich PDE09K3SG Packaged Terminal Air Conditioner. This image displays the front view of the unit, highlighting its compact design and air intake/output grilles.
Važne sigurnosne informacije
Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza prilikom korištenja električnih uređaja kako biste smanjili rizik od požara, strujnog udara i ozljeda osoba.
- Pročitajte sve upute prije uporabe ovog uređaja.
- Nemojte koristiti nijedan uređaj s oštećenim kabelom ili utikačem.
- Nemojte blokirati otvore za zrak.
- Osigurajte ispravno uzemljenje.
- Sve servise prepustite kvalificiranom servisnom osoblju.
Postavljanje i instalacija
The Friedrich PDE09K3SG is designed for through-the-wall installation. Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified technician.
Raspakiranje
- Pažljivo izvadite jedinicu iz pakiranja.
- Inspect the unit for any shipping damage. Report any damage immediately to your dealer.
- Provjerite jesu li prisutne sve komponente navedene na popisu pakiranja.
Zahtjevi za lokaciju
- Install the unit in a wall sleeve designed for PTAC units.
- Osigurajte dovoljan razmak oko uređaja za pravilan protok zraka.
- The unit requires a dedicated 230/208 Volt electrical circuit.
Električna veza
This unit operates on 230/208 Volts. Consult a qualified electrician for proper wiring and connection to ensure compliance with local electrical codes.
Upute za rad
The Friedrich PDE09K3SG unit is typically controlled by a wall-mounted thermostat for precise temperature management.
Kontrole termostata
The wall thermostat allows you to select operating modes and adjust temperature settings.
- Način rada sustava: Use the system switch to select between "Cool", "Heat", "Off", or "Em. Heat" (Emergency Heat) modes.
- Način ventilatora: Use the fan switch to select "Auto" (fan runs only when heating/cooling) or "On" (fan runs continuously).
- Podešavanje temperature: Use the Up and Down arrow buttons to set your desired room temperature. The digital display will show the current and set temperatures.
Figure 2: Close-up of the Friedrich PTAC unit's internal control panel, indicating it is controlled by a wall thermostat. This panel is typically hidden behind a cover.
Upravljanje protokom zraka
The unit features a large vent for efficient air distribution. Ensure that the vent is not obstructed by furniture, curtains, or other objects to maintain optimal performance.
Održavanje
Regular maintenance ensures the longevity and efficiency of your PTAC unit.
Čišćenje zračnog filtra
The unit is equipped with an antimicrobial air filter. A clean filter is essential for efficient operation and good indoor air quality.
- Turn off the unit at the wall thermostat or circuit breaker before cleaning.
- Pronađite i uklonite zračni filter (obično iza prednje rešetke).
- Clean the filter with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinstallation.
- Reinstall the dry filter and restore power to the unit.
- Frekvencija: Clean the filter monthly, or more often if the unit is used frequently or in dusty environments.
Čišćenje zavojnice
The DiamonBlue Corrosion Protection helps protect the coils, but periodic cleaning by a qualified technician is recommended to remove dirt and debris that can accumulate over time.
Rješavanje problema
Prije nego pozovete servis, ponovnoview sljedeći uobičajeni problemi i rješenja:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Jedinica se ne uključuje. | No power; thermostat set to "Off". | Check circuit breaker; ensure thermostat is set to "Cool" or "Heat". |
| Nedovoljno hlađenje/grijanje. | Dirty air filter; obstructed airflow; incorrect thermostat setting. | Clean air filter; remove obstructions from vents; adjust thermostat. |
| Neobična buka. | Loose parts; debris in fan. | Turn off unit and inspect for loose components or debris. If noise persists, contact service. |
Ako koraci za rješavanje problema ne riješe problem, obratite se kvalificiranom servisnom osoblju.
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | PDE09K3SG (Item Model Number: 292279) |
| Marka | Friedrich |
| Kapacitet hlađenja | 9,400 BTU (0.78 tona) |
| Vrsta grijanja | Električno grijanje |
| Voltage | 230/208 volti |
| Dimenzije (D x Š x V) | 21.5 cm x 42 cm x 16 cm |
| Težina artikla | 127 funti |
| Rashladno sredstvo | R 410A |
| Posebne značajke | Heating and Cooling Function, DiamonBlue Corrosion Protection, Antimicrobial Air Filter |
| Sezonski omjer energetske učinkovitosti (SEER) | 13 |
| Boja | Bijela |
Jamstvo i podrška
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Friedrich webmjesto. Čuvajte račun za jamstvene zahtjeve.
Proizvođač: Friedrich
Uključene komponente: Vodič za montažu
