Uvod
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Sigurnosne informacije
- Uvijek rukujte uređajem na siguran način.
- Ne izlažite uređaj ekstremnim temperaturama ili vlazi.
- Čuvati izvan dohvata djece.
- Pravilno odložite baterije u skladu s lokalnim propisima.
- Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
Sadržaj paketa
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Kutija za pohranu
- Korisnički priručnik (ovaj dokument)
Note: A 9V battery is required for operation and is sold separately.
Postavljanje: Ugradnja baterije
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Locate the battery compartment cover, typically on the handle or rear of the device.
- Pomaknite ili otkopčajte poklopac da biste otvorili pretinac.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Čvrsto namjestite poklopac odjeljka za baterije.
- Uređaj je sada spreman za upotrebu.
Upute za rad
Uključivanje/isključivanje
- To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- To turn the detector ISKLJUČENO, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Smanjenje osjetljivosti
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Upozorenje o slaboj bateriji
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Značajke
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Upozorenje o slaboj bateriji.
- Comes with a handy carrying case.
Održavanje
- Čišćenje: Obrišite detektor mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
- Skladištenje: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Baterija: Izvadite bateriju ako uređaj nećete koristiti dulje vrijeme kako biste spriječili curenje i oštećenje.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Detector does not turn on. | Baterija je prazna ili nepravilno instalirana. | Provjerite polaritet baterije. Zamijenite novom 9V baterijom. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Problem s baterijom. Unutarnji kvar. | Check/replace battery. If problem persists, contact customer support. |
Tehnički podaci
| Marka | Cen-Tech |
| Broj modela | 94138 |
| Izvor napajanja | 9V baterija (nije uključena) |
| Vrsta detekcije | Metal |
| Wand Size | 6 inča |
| upozorenja | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Posebne značajke | 50% Sensitivity Reduction Button |
| Dimenzije | 16.5 x 5 x 2 inča |
| Težina artikla | 1.45 funti |
| Materijal | Wood, Metal (referring to detected materials) |
| Međunarodna ocjena zaštite | IP54 |
Jamstvo i podrška
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech webstranicu. Sačuvajte račun kao dokaz o kupnji za bilo kakve reklamacije u jamstvenom roku.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.
