Oštrica BLH3123

Upute za uporabu nosača baterije Blade 120SR

Model: BLH3123

Uvod

This manual provides essential instructions for the installation, operation, and maintenance of your Blade 120SR Battery Mount (Part Number BLH3123). Please read this manual thoroughly before proceeding with any procedures to ensure proper function and longevity of the component.

Sigurnosne mjere opreza

  • Always disconnect the battery from the aircraft before performing any installation or maintenance.
  • Use appropriate tools to avoid damaging the component or surrounding parts.
  • Male dijelove držite podalje od djece.

Sadržaj paketa

  • 1x Blade 120SR Battery Mount (BLH3123)
  • (Additional fasteners or components may be included depending on the specific kit)

Postavljanje i instalacija

This section details the steps required to install the Blade 120SR Battery Mount onto your aircraft.

  1. priprema: Ensure the aircraft's power is off and the battery is disconnected. Place the aircraft on a stable, clean surface.
  2. Remove Old Mount (if applicable): Carefully unscrew and remove the existing battery mount from the aircraft chassis. Note the orientation and attachment points.
  3. Position New Mount: Align the new Blade 120SR Battery Mount (BLH3123) with the designated mounting points on the aircraft frame. Ensure the orientation matches the original component.
  4. Sigurno montiranje: Using the appropriate small screws (typically M1 or M2, not included with mount unless specified), gently secure the battery mount to the chassis. Do not overtighten screws, as this can strip the plastic or threads.
  5. Provjerite instalaciju: Gently tug on the installed mount to ensure it is firmly attached and does not wobble.
Blade 120SR Battery Mount (BLH3123)

Image: The Blade 120SR Battery Mount (BLH3123) showing its structure and mounting points. This component is designed to securely hold the battery in place on the Blade 120SR helicopter.

Upute za rad

Once the battery mount is installed, follow these steps to properly secure and use your battery.

  1. Umetnite bateriju: Slide the compatible battery into the designated slot on the battery mount. Ensure it fits snugly without excessive force.
  2. Sigurna baterija: If your aircraft model includes a battery strap or clip, use it to further secure the battery in the mount. This prevents movement during flight.
  3. Povežite bateriju: Connect the battery's power lead to the aircraft's power connector.
  4. Provjera prije leta: Before flight, always perform a visual inspection to confirm the battery is securely seated and the mount is intact.

Održavanje

Regular inspection and maintenance will help prolong the life of your battery mount.

  • Vizualni pregled: Periodically inspect the battery mount for any signs of cracks, stress marks, or deformation, especially after hard landings or impacts.
  • Čišćenje: If necessary, gently clean the mount with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals.
  • Provjera pričvršćivača: Ensure all screws securing the mount are tight. Retighten if loose, but do not overtighten.
  • Zamjena: If the mount shows significant wear, damage, or no longer holds the battery securely, replace it immediately with a genuine Blade BLH3123 part.

Rješavanje problema

ProblemMogući uzrokOtopina
Battery mount is loose.Pričvrsni vijci su labavi ili istrošeni.Tighten screws. If threads are stripped, consider using a slightly larger screw (if safe for the aircraft) or replacing the mount/chassis part.
Battery does not fit securely.Incorrect battery size or damaged mount.Ensure you are using the correct battery for the Blade 120SR. Inspect the mount for damage and replace if necessary.
Mount is cracked or broken.Oštećenje od udara ili zamor materijala.Replace the battery mount with a new Blade BLH3123 part.

Tehnički podaci

  • Model: BLH3123
  • Marka: Sječivo
  • Proizvođač: Horizon Hobi
  • Dimenzije proizvoda: 3 x 2 x 0.66 inča (7.62 x 5.08 x 1.68 cm)
  • Težina artikla: 0.16 unci (4.54 grama)
  • Preporučena dob: 14 godine i više
  • ASIN: B003TRNTCW

Jamstvo i podrška

For warranty information or technical support regarding your Blade 120SR Battery Mount, please contact Horizon Hobby directly. Refer to the official Horizon Hobby website or your product packaging for the most current contact details and warranty terms.

Proizvođač: Horizon Hobi

Webstranica: www.horizonhobby.com

Povezani dokumenti - BLH3123

prijeview Upute za ugradnju i uporabu stropnog ventilatora s lopaticama
Sveobuhvatan vodič za ugradnju i rad stropnog ventilatora Blade, uključujući sigurnosne upute, popis dijelova i korake sastavljanja.
prijeview Blade TB-PR Transponder Bypass Install Guide for Honda Prelude and Acura RL
Comprehensive installation guide for the Blade TB-PR transponder bypass module, detailing wiring, programming, and diagnostics for Honda Prelude (1997-2001) and Acura RL (1998-2004) vehicles.
prijeview Upute za uporabu RC helikoptera Blade 120 S2
Sveobuhvatan vodič za RC helikopter Blade 120 S2, koji pokriva postavljanje, sigurnost, letačke operacije i rješavanje problema. Saznajte više o SAFE tehnologiji i naprednim kontrolama za hobiste.
prijeview Upute za uporabu RC helikoptera Blade Nano S3
Ovaj dokument pruža sveobuhvatne upute za RC helikopter Blade Nano S3, koje obuhvaćaju postavljanje, rad, sigurnosne mjere, rješavanje problema i održavanje. Naučite letjeti i brinuti se za svoj Nano S3 uz ovaj službeni vodič tvrtke Horizon Hobby.
prijeview Upute za uporabu Blade mCX2 - Vodič za postavljanje, letenje i održavanje
Sveobuhvatni priručnik s uputama za RC helikopter Blade mCX2. Saznajte više o postavljanju, kontrolama leta, sigurnosnim mjerama opreza, rješavanju problema i zamjeni dijelova od Horizon Hobbyja.
prijeview Blade Inductrix 200 Instruction Manual
Comprehensive instruction manual for the Blade Inductrix 200 quadcopter, detailing setup, operation, safety guidelines, and maintenance procedures.