HOTT Portable CD Player User Guide

Starting Steps

Introduction to button functions

Common problems analysis
- Cannot power on (unable to start): check whether the power supply is correctly connected to the DC power interface, or whether the battery is correctly assembled according to the label of the battery compartment.
- Cannot read disc: discs cannot be read with serious scratches, cracks, fingerprints, or dirt. Please replace it with a newer or clean one. (note if the disc is in a acceptable format)
- No sound: check whether the earphone is correctly inserted into the headphone connector.
Contact us
HONGFUTAI E-TECH(SHENZHEN)CO., LIMITED
ADD: 4F,No.17,Xinxing Industrial Park, Xinhe Community, Fuhai Street, Baoan District, Shenzhen 518103,China.
U.S.A Service Center
Toll-free: 1-866-468-8280(09:00-17:30)
E-mail: service@hott.net.cn
HOTT Corp: 13620 Benson Ave. Ste B Chino. CA 91710-5201
Germany Service Center
Toll-free: +49 7171 8707105(8:00-17:00)
E-mail: info.eu@hott.net.cn
Address: Rolf-Michael Pohl Klarenbergstrae 36 73525 Schwäbisch Gmünd
Documents / Resources
![]() | Portable CD Player |
References
- User Manualmanual.tools

I have a DC611T. I have enjoyed using it in my car. I now says “hold” on the screen and will not play. I changed batteries and checked all my cords. What else should I check.
How do I fix the 'hold' message on my HOTT DC611T CD player screen?
The "HOLD" message on your HOTT CD player indicates that the button lock feature is activated. This feature is designed to prevent accidental button presses while the device is in use or being carried.
To resolve this and unlock the player, locate the M/MODE button (often labeled with a lock icon). Long press this button to toggle the lock off. Once unlocked, the "HOLD" message should disappear from the screen, and the buttons will function normally again.
Note: While your specific model is the DC611T, this functionality is standard across HOTT portable CD players like the CD204 and HC025 series.
Read the full Q&A page