Hotgate Type 14623 Gate for Pasture Fence Net

DIMENSION

INSTALLATION INSTRUCTION

1. Overview of delivery / position of parts
2. Threading the crossbar
3. Fastening the crossbar with a hinge part
4. Correctly positioned hinge part
5. Fastening the crossbar with a screw
6. Overview of fully assembled gate
7. Setting up the gatel in the field
8. Pushing the gate post into the ground around which the gate pivots
9. Hooking the gate into the gate post
10. Positioning of the stop post
11. Place the end/beginning post of the net against the gate and connect the posts
12. Attach the net connection clamp outside the passage area
13. Connecting the electrified cross-connection in the gate to the net at the gate post/swivel point
14. Connecting the underground cable to the nets on the left and right of the gate
15. Burying the underground cable. Attention: Lay the underground cable in a protective tube
16. Open the gate by lifting it slightly by approx. 5 cm
17. Open and close the gate at the upper insulated crossbar
18. Finished gate

Documents / Resources

Hotgate Type 14623 Gate for Pasture Fence Net [pdf] Instruction Manual Type 14623 Gate for Pasture Fence Net, Type 14623, Gate for Pasture Fence Net, Pasture Fence Net, Fence Net

References

• User Manual