Honeywell MPA2 Access Control Panel


Honeywell’s web-based MPA2 controller provides solutions for installations of any size.

MPA2 enables users to securely manage their system anywhere there’s an Ethernet/Internet connection—with no dedicated PC or software costs. The user-friendly design (Push-in connectors and RJ45 ‘Click ‘n Done’ approach) makes it simple to install and easy to operate and maintain.

MPA2 gives you all the benefits of traditional access control, such as helping you secure doors, manage employee access, and manage sites remotely. It also lets you pull reports easily to meet compliance requirements. With a browser-based interface, your learning curve and training times are significantly decreased. No dedicated software is required—simply log on and you’re ready to go, securely—from the office or anywhere. You can manage MPA2 using the embedded browser, MAXPRO® Cloud’s secure cloud infrastructure, or WIN-PAK®’s integrated security suite. MPA2 has been developed with an installer-friendly design that easily adapts to existing IT infrastructure and methods, reducing installation and support costs. So as your system grows, MPA2 grows with you.


Honeywell-MPA2-Access-Control-Panel-FIG-1INCREASED PRODUCTIVITY

  • New, faster, and more intuitive user interface decreases time spent on deployment and training.
  • Embedded browser features basic access control that is simple and easy to use.
  • Add MAXPRO® Cloud or WIN-PAK® for more advanced features, such as video and intrusion integration, advanced reporting, rules and photo badging.
  • New, faster Hardware.

Honeywell-MPA2-Access-Control-Panel-FIG-2FASTER INSTALLATION

  • IP-based hardware with Power over Ethernet (PoE) PLUS capability eliminates additional network module wiring and simplifies powering the panel.
  • At-the-door mounting decreases cable runs.
  • Metal enclosure with included 3.5-Amp power supply and battery backup available for traditional installs or retrofit applications.
  • RJ45 connection for Ethernet, Interfaces, Readers and Doors.
  • Eliminate the need for screwdrivers with push-in connectors.

Honeywell-MPA2-Access-Control-Panel-FIG-3LOWER COST OF OWNERSHIP

  • Expand single door controllers to manage 2 to 4 doors without additional hardware.
  • Add additional panels and manage using the embedded interface via Ethernet Virtual Loop (EVL)** or RS-485 loops.
  • 2 additional on-board auxiliary REX (Request to Exit) and Door Contact inputs per door enable turn style, double lock, and 4 door configurations without extra hardware.

Honeywell-MPA2-Access-Control-Panel-FIG-4ENHANCED SECURITY

  • 256-bit AES encrypted communication between panel and hosts (browser, cloud, and WIN-PAK®).
  • Security certificate capability ensures secure and trusted connections to the panel.
  • Panel tamper switches included on both plastic* and metal enclosures.
  • 128-bit AES encrypted bi-directional reader panel communication (OSDP:V2) protocol.

Honeywell-MPA2-Access-Control-Panel-FIG-5FLEXIBLE 3-IN-1 CAPABILITY

  • Embedded, cloud, or software-hosted capability from one panel.
  • Deploy MPA2 for a large variety of jobs from basic access control for a single site up to multi-site, enterprise-level security with fully integrated access, video and intrusion.

Coming Soon
Ethernet Virtual Loop (EVL) is compatible with MPA2 and NetAXS-123 panels.


MPA1002E-MPS MPA2 – 2 Door Access Control Solution (Europe). Includes: MPA2C1, MPA2ENCM, 2x MPA2RJ, MPA2BAT7
MPA1004E-MPS MPA2 – 4 Door Access Control Solution (Europe). Includes: MPA2C1-4 (4 DOOR LICENSED), MPA2ENCM, 2x MPA2RJ, MPA2BAT7
MPA1002U-MPS MPA2 – 2 Door Access Control Solution (USA). Includes: MPA2C1, MPA2ENCMP, 2x MPA2RJ, MPA2BAT7
MPA1004U-MPS MPA2 – 4 Door Access Control Solution (USA). Includes: MPA2C1-4 (4 DOOR LICENSED), MPA2ENCMP, 2x MPA2RJ, MPA2BAT7
MPA2C1 MPA2 – All-in Smart Access Control Panel only
MPA2C1-4 MPA2 – All-in Smart Access Control Panel only, 4 door licensed
MPA2ENCM MPA2 – Metal Enclosure (Europe)
MPA2ENCMP MPA2 – Metal Enclosure (USA)
MPA2RJ RJ45 to 8 Screw Terminal block
MPA2BAT7 (=NXBAT7) 7Ah Lead Acid Battery
NX4IN(1) MPA2 – RS485 Input Board – 32 inputs per board.
NX4OUT(1) MPA2 – RS485 Output Board – 16 outputs per board.
NXIOENCKT Double board enclosure for NX4IN, NX4OUT
  1. USA only – Requires 24 VDC, 2.3 A (55 W).


For More Information:

Honeywell Commercial Security

  • Aston Fields Road
  • Whitehouse Industrial Estate
  • Runcorn Cheshire WA7 3DL
  • Tel: +44 (0)8448 000 235

© 2020 Honeywell International Inc.

Documents / Resources

Honeywell MPA2 Access Control Panel [pdf] Owner's Manual
MPA2 Access Control Panel, MPA2, Access Control Panel, Control Panel, Panel


Leave a comment

Your email address will not be published. Required fields are marked *