PORTABLE MOOD TABLE LAMP
User Manual
Read and save these instructions before use
HWT-M1
PRODUCT INTRODUCTION
Portable Mood Table Lamp
Honeywell HWT-M1Table Lamp uses 20 Sunturalux™ 2835 full-spectrum LED lamp beads with a CRI (Color Rendering Index)≥ 95, providing the lighting effect closest to natural light.
The lamp does not have blue light, glare, flicker hazards. A variety of RGB colors are set to be optional. It adopts the spherical magnetic shaft to adjust the lamp head at multiple angles.
The battery capacity of this lamp is large and can be used for a long time.
Health-Conscious and Eye-Friendly Light Source: The lamp has undergone flicker, blue light hazard, and glare tests to meet or exceed standards, ensuring a strain-free visual experience.
Multiple Color Temperature and Brightness Adjustments: Tailor your lighting with HWT-M1’s expansive color temperature spectrum (3,000 K-5,500 K) and dimming options, creating the perfect atmosphere for work or relaxation.
Independent RGB lighting effect: The product has independent RGB lighting effect with adjustable color, increasing the ambient atmosphere.
Magnetic adjustable shaft: The product uses a magnetic spherical structure, adjusting the position of the lamp head at various angles to meet various lighting needs.
Built to Last: Crafted with premium metals like iron, the HWT-M1 promises enduring performance, boasting a lifespan exceeding 30,000 hours.
Built-in Lithium Battery with Long Endurance Time: The total battery capacity of this product is 5200mAh. When used at the highest brightness, the battery life is 6.5 hours; when used at the lowest brightness, the battery life is 35 hours.
SAFETY WARNING
When using the lamp, please always follow these basic safety precautions:
Ensure that the power voltage matches the rated voltage and frequency of the lamp.
Mismatched voltage may cause damage to the components and result in malfunction.
Ensure that the lamp is securely installed with fasteners on a flat, sturdy surface to prevent tipping, falling, product damage, personal injury, or property loss, and that installation is not performed while the power is on.
Ensure that the power source has proper grounding protection. Incorrect power connections may lead to electric shock and pose serious risks.
Please consult a qualified electrician for the inspection and repair of the lamp, as unauthorized repairs may pose serious safety risks.
If any parts of the lamp are exposed, there is a risk of electric shock, which can be life-threatening. Ensure that the lamp is fully assembled before connecting it to power.
WARNING: To prevent the occurrence of accidents that threaten personal safety such as lamp damage, falling, electrical shock, fire, and so on, please strictly follow the instructions for installation and use, do not modify the lamp’s structure, and exchange parts or accessories.
CLEANING AND MAINTENANCE
We kindly ask you to clean and inspect the lamp regularly. Before performing any care or maintenance, please ensure that the lamp is turned off and the power is disconnected to prevent electric shock.
When cleaning the lamp, please use a soft, lint-free cloth lightly dampened with a diluted neutral cleaner to wipe the lamp’s body. We recommend avoiding alcohol or any chemical solvents, such as kerosene or stain removal oil, as these may damage the lamp’s housing.
Please refrain from using water or any other liquids to wash any parts of the lamp directly.
WARNING: For your safety, please always disconnect the power before cleaning and maintaining the lamp to prevent electric shock.
TECHNICAL SPECIFICATIONS
| PARAMETERS | DETAILS |
SPECIFICATIONS |
| General | Model Number | HWT-M1 |
| Material | ABS, Iron, PC | |
| Input | DC 5 V | |
| Power | 3 W | |
| Light Source | LED | Sunturalux™ 2835 Full Spectrum |
| LED Beads Quantity | 20 pcs | |
| Luminous Flux | 120 LM | |
| CCT | 3,000 K ~ 5,500 K | |
| CRI (Ra) | 95 | |
| Lifespan | >30,000 hrs | |
| Others | Charging Cable Type | TYPE C |
PACKAGE CONTENT
(The optional accessories in the package will have different configurations depending on the style chosen at the time of purchase.)
PARTS DESCRIPTION
(The product appearance diagram is for reference only, please refer to the actual product for detailed specifications.)
INSTALLATION STEPS
- Take out the lamp arm and base.
- Align the screw thread of the lamp arm with the center hole of the base, then insert and rotate it slowly until it is tightened.
- Align the magnetic part at the bottom of the lamp head with the magnetic ball on the top of the lamp arm and adjust them.
USE AND OPERATION
Charging Indicator
- When the battery level is lower than 20%, the indicator light turns red.
- It lights up red when charging and lights up green when fully charged.
- When the battery is low, it takes 7 hours to fully charge.
Control Operation
- When the physical switch is turned to ON, the product is in the (standby/ready/unlocked) state and the light can be turned on normally.
- When it is turned to OFF, the product is in the (protection/locked) state and the light cannot be turned on.
USE AND OPERATION (COTINUED)
Touch the center area of the logo to turn on/off all lights.The lamp has a memory function.
Lower Light Key
- Touch the key to cycle through the functions of the lower light: light on-3,000 K-3,500 K-4,000 K-5,500 K-light off.
- Touch and hold the key for stepless brightness adjustment of the lower light.
RGB Key
- Touch to activate RGB light.
- After activating RGB light, touch the key to enter the 9-color dynamic cycle transition mode. Touch the key again to fix the current color.
- Touch and hold for 2 seconds to turn off the RGB light.
TROUBLESHOOTING
If the lamp is not functioning, please follow these troubleshooting steps:
- Kindly check if the lamp is properly plugged in and ensure that the power cord is securely connected.
- If the power is on, please inspect the control panel for any visible damage.
- If you have completed these checks and the lamp still does not turn on, it is possible that the internal wiring may be damaged. In this case, we kindly ask you to contact our customer support team for assistance in resolving the issue.
Email: support@honeywellsmartlighting.com
WARRANTY CARD
Return and Exchange Policies
Huo Ming Technology Guangdong Co., Ltd. warrants that this product is free from defects in materials and workmanship for a period of 2 years. This warranty is valid only in the United States, Canada, Germany, France, Italy, Spain, and the United Kingdom.
This warranty applies only to products that are properly installed, maintained, and operated in accordance with the provided instructions. It does not cover failures or operational difficulties caused by normal wear and tear, accidents, abuse, misuse, alterations, misapplications, improper installation, or inadequate maintenance.
Kind Reminder: If you encounter any issues with your order and contact us for assistance, please ensure you include your product order information and any relevant photos or videos (if necessary) to facilitate a quick resolution.
IMPORTANT: If you experience any product-related issues, please contact our customer support center first. We can help resolve your concerns before you decide to return the product. Do not attempt to disassemble the product or modify any original parts or accessories, as doing so may void your warranty and result in damage to the product or personal injury.
The Warranty Does Not Cover:
- Damage resulting from abusive or unreasonable use, or additional damage.
- Defects arising from normal wear and tear, which will not be considered manu facturing defects under this warranty.
- Damage resulting from unauthorized repair attempts or use that does not comply with the instruction manual.
- Damage incurred by failing to follow the instructions outlined in the “Safety Warning” and “Cleaning and Maintenance” sections.
Return or Exchange Information
Please fill out the order, product, and user information below and include it in the package for collection.
Product Name: _______________________________
Model Number: _________________________
Date of Purchase: _____________________
Purchased From: _____________________
Customer Name: __________________________
Phone Number: ____________________
Email: _________________________
If you have any questions, please feel free to contact us.
Huo Ming Technology Guangdong Co., Ltd.
Address: Room 3501, Haijunda Plaza, Guizhou Avenue, Foshan, China
Contact Information:
Phone Numbers:
NA: +1 800 5608 962 – Mon – Fri: 9:00 AM – 5:00 PM (EST)
EU: +86 400 8787 805 – Mon – Fri: 9:00 AM – 5:00 PM (GMT+2)
UK: +86 400 8787 805 – Mon – Fri: 9:00 AM – 5:00 PM (GMT)
Email: support@honeywellsmartlighting.com
Website: honeywellsmartlighting.com
Huo Ming Technology
Guangdong Co., Ltd.
Room 3501, Haijunda Plaza, Guizhou
Avenue, Foshan, China
NA: +18005608962
EU: +864008787805
UK: +864008787805
support@honeywellsmartlighting.com
honeywellsmartlighting.com
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representations or warranties with respect to this product. This product is manufactured by Huo Ming Technology Guangdong Co., Ltd.
MADE IN CHINA
Contact Information:
Phone Numbers:
NA: +18005608962
EU: +864008787805
UK: +864008787805
Email: support@honeywellsmartlighting.com
Website: honeywellsmartlighting.com
Documents / Resources
 |
Honeywell HWT-M1 Portable Mood Table Lamp [pdf] User Manual HWT-M1, HWT-M1 Portable Mood Table Lamp, HWT-M1, Portable Mood Table Lamp, Mood Table Lamp, Table Lamp |