HONEYWELL DEV200 Variable Frequency Drive

Variable Frequency Drive DEV200 Specifications
The table below has the basic unit specifications without any extensions

Main supply (L1, L2, L3)	DEV200
Power range 380-500 V AC	1.1-75 kW / 1.5-100 hp
Supply frequency	50/60 Hz
Displacement power factor (cos φ) near unity	> 0.98
Switching on input supply L1, L2, L3	1-2 times/min.
Output data (U, V, W)
Output voltage	0-100% of supply voltage
Output frequency	0-590 Hz (0-300 Hz in FluxMode)
Output frequency (OL)	0-590 Hz
Switching on output	Unlimited
Motor control and supported motor types
Ramp times	0.01-3600 s
EMC and motor cable length
Cable length – screened/unscreened	150/300 m
Functional Safety
Safety function Safe Torque Off (STO – EN 61800-5-2)	standard
Digital inputs
Programmable digital inputs	6
Changeable to digital output	2 (terminal 27, 29)
Logic	PNP or NPN
Voltage level	0-24 V DC
Maximum voltage on input	28 V DC
Input resistance, Ri	Approx. 4 k
Scan interval	1 ms
Analog inputs
Analog inputs	2
Modes	Voltage or current
Voltage level	-10 to +10 V (scaleable)
Current level	0/4 to 20 mA (scaleable)
Accuracy of analog inputs	Max. error: 0.5% of full scale
Pulse inputs / Encoder inputs
Programmable pulse inputs	2
Voltage level	0-24 V DC (PNP positive logic)
Pulse input accuracy (0.1-1 kHz)	Max. error: 0.1% of full scale
* Two of the digital inputs can be used for pulse inputs.
Digital outputs
Programmable digital/pulse outputs	2
Voltage level at digital/frequency output	0-24 V DC
Max. output current (sink or source)	40 mA
Maximum output frequency at frequency output	32 kHz
Accuracy on frequency output	Max. error: 0.1% of full scale

Analog outputs
Programmable analog outputs	1
Current range at analog output	0/4-20 mA
Max. load to common at analog output (clamp 30)	500
Accuracy on analog output	Max. error: 0.5 % of full scale
Relay outputs
Programmable relay outputs	2
Max. terminal load (AC) on 1-3 (NC), 1-2 (NO), 4-6 (NC) power card	240 V AC, 2 A
Max. terminal load (AC -1) on 4-5 (NO) power card	400 V AC, 2 A
Min. terminal load on 1-3 (NC), 1-2 (NO), 4-6 (NC), 4-5 (NO) power card	24 V DC 10 mA, 24 V AC 20 mA
Control card
USB interface	1.1 (Full Speed)
USB plug	Type “B”
RS485 interface	Up to 115 kBaud
Max. load (10 V)	15 mA
Max. load (24 V)	200 mA
Surroundings/external
Ingress protection class	IP: 20, 21 & 55 UL Type: Chassis, Type 1 & Type 12
Vibration test	0.7 g
Max. relative humidity	5-95% (IEC 721-3-3); Class 3K3 (non-condensing) during operation
Ambient temperature	Max. 50 °C without derating, – Operating temperature range is -10 °C to 50 °C without derating Max 55 °C with derating
Galvanic isolation of all	I/O supplies according to PELV
Aggressive environment	Designed for 3C2 (IEC 60721-3-3)
Fieldbus communication
Standard built-in: Protocol Modbus RTU	Optional with separate Fieldbus communication card: PROFIBUS DP V1 PROFINET EtherNet/IP Modbus TCP EtherCAT
Inbuilt protection
– Electronic motor thermal protection against overload
– Protection against overtemperature
– The AC drive is protected against short circuits on motor terminals U, V, W
– The AC drive is protected against ground faults on motor terminals U, V, W
– Protection against mains phase loss

Electrical Data for A, B, and C Enclosures

[T5] 3 x 380-500 V AC – high overload

High overload (160% 1 min/10 min)									Enclosure size
Type code	Output current				Typical shaft output power		Continuous input current	Estimated power loss	Protection rating [IEC/UL]
	(3 x 380-440 V)		(3 x 441-500 V)						IP20/21	IP55
DEV200	Con. IN	Inter. IMAX (60 s)	Con. IN	Inter. IMAX (60 s)	kW @ 400 V	hp @ 460 V	[A] @ 400 V	[W]	Chassis	Type 12
P1K1	3	4.8	2.7	4.3	1.1	1.5	2.7	58	A2	A4
P2K2	6	9.0	5	8	2	3	5	88	A2	A4
P4K0	10	16.0	8.2	13.1	4.0	5.0	9.0	124	A2	A4
P7K5	16	25.6	15	23	8	10	14	255	A3	A5
P15K	32	51.2	27.0	43.2	15.0	20.0	29.0	379	B3	B1
P30K	61	91.5	52	78	30	40	55	570	B4	C1
P45K	90	135.0	80.0	120.0	45.0	60.0	82.0	891	C3	C1
P75K	147	221.0	130	195	75	100	133	1232	C4	C2

[ T5] 3 x 380-500 V AC – normal overload

Normal overload (110% 1 min/10 min)									Enclosure size
Type code	Output current				Typical shaft output power		Continuous input current	Estimated power loss	Protection rating [IEC/UL]
	(3 x 380-440 V)		(3 x 441-500 V)						IP20/21	IP55
DEV200	Con. IN	Inter. I MAX (60 s)	Con. IN	Inter. I AX M (60 s)	kW @ 400 V	hp @ 460 V	[A] @ 400 V	[W]	Chassis	Type 12
P1K1	3	4.8	2.7	4.3	1.1	1.5	2.7	58	A2	A4
P2K2	6	9	5	8	2	3	5	88	A2	A4
P4K0	10	16.0	8.2	13.1	4.0	5.0	9.0	124	A2	A4
P7K5	16	26	15	23	8	10	14	255	A3	A5
P15K	38	41.3	34.0	37.4	18.5	25.0	34.0	465	B3	B1
P30K	73	80	65	72	37	50	66	698	B4	C1
P45K	106	117.0	105.0	116.0	55.0	75.0	96.0	1083	C3	C1
P75K	177	195	160	176	90	125	161	1474	C4	C2

Dimensions and Sizes for Enclosures A, B, and C

Enclosure size		A2		A3		A4	A5	B1	B2	B3	B4	C1	C2	C3	C4
Protection rating [IEC/UL]		IP20 Chassis	IP21 Type 1	IP20 Chassis	IP21 Type 1	IP55 / Type 12		IP55 / Type 12		IP20 / Chassis		IP55 / Type 12		IP20 / Chassis
[mm]	(H) Height of back plate	268	375	268	375	390	420	480	650	399	520	680	770	550	660
	(H1) Height with decoupling plate for fieldbus cables	374	–	374	–	–	–	–	–	420	595	–	–	630	800
	(H2) Distance to Mounting holes	254	350	257	350	401	402	454	624	380	495	648	739	521	631
	(W) Width	90	90	130	130	200	242	242	242	165	230	308	370	308	370
	(W1) Distance to Mounting holes	70	70	110	110	171	215	210	210	140	200	272	334	270	330
	(D) Depth	220	222	220	222	175	200	260	260	262	242	310	335	333	333
Air Cooling [mm]	(I) Air space in inlet	100	100	100	100	100	100	200	200	200	200	200	200	200	225
	(O) Air space outlet	100	100	100	100	100	100	200	200	200	200	200	200	200	225
[kg]          Weight		4.9	5.3	6	7	9.7	14.2	23	27	12	23.5	45	64	35	50

MODEL SELECTION GUIDE

DEV200P2K2T5E20H2BGXX

1. Please be aware that not all combinations are possible. Get help to configure your AC drive using the online configurator
2. All VFDs are with LCP installed
3. All VFDs comes with standard cable entry
4. All VFDs comes with No Adaptation option
5. All VFDs comes with latest released standard software
6. LCP standard lanugage package including English, German, French, Spanish, Danish, Italian and Finnish; Contact factory for other language options
7. All VFDs comes without any fieldbus option – select fieldbus module separately as per requirement.
8. All VFDs comes without any funtional extension – select functional module separately as per requirement.

DEV200 Fieldbus Options
Part Number	Description
200B1235	DEV200 ProfiNet RT MCA 120
200B1219	DEV200 EtherNet/IP MCA 121
200B1296	DEV200 Modbus TCP MCA122
200B5646	DEV200 EtherCAT MCA 124
200B1200	DEV200 Profibus-DP MCA 101

DEV200 Functional Extension
Part Number	Description
200B1212	DEV200 General Purpose I/O MCB 101
200B1203	DEV200 Encoder Input MCB 102
200B1210	DEV200 Relay Option MCB 105

DEV200 IP21/NEMA 1 Kits
Part Number	Description
200B1122	DEV200, A2 Frame, IP21/NEMA1 Kits
200B1123	DEV200, A3 Frame, IP21/NEMA1 Kits
200B1187	DEV200, B3 Frame, IP21/NEMA1 Kits
200B1189	DEV200, B4 Frame, IP21/NEMA1 Kits
200B1191	DEV200, C3 Frame, IP21/NEMA1 Kits
200B1193	DEV200, C4 Frame, IP21/NEMA1 Kits

For more information

• To learn more about Honeywell’s products, visit www.process.honeywell.com or contact your Honeywell account manager.
  Honeywell Process Solutions
• 2101, CityWest Boulevard
• Houston, TX 77042.
• Honeywell House, Arlington Business Park, Bracknell, Berkshire, England RG12 1EB UK.
• Shanghai City Centre, 100 Zunyi Road, Shanghai, China 200051.  www.process.honeywell.com

VFDDOC-XX21-en-100B | Rev 2| February 2025 © 2025 Honeywell International Sàrl

Documents / Resources

HONEYWELL DEV200 Variable Frequency Drive [pdf] Owner's Manual DEV200 P1K1, DEV200 P2K2, DEV200 P4K0, DEV200 P7K5, DEV200 P15K, DEV200 P30K, DEV200 P45K, DEV200 P75K, DEV200 Variable Frequency Drive, DEV200, Variable Frequency Drive, Frequency Drive, Drive

References

• User Manual