homematic IP HMIP-RF USB Stick Instruction Manual

The Homematic IP RF USB Stick provides the required radio technology and basic functions of the Homematic IP communication protocol to communicate with other Homematic IP components.
It serves as a development tool for Homematic IP software and components, compatible with the Software Development Kit (SDK) and Device Development Kit (DDK).

Product Usage Instructions

If you are unable to connect the RF USB Stick directly to your PC, use the provided extension cable.
Only use the extension cable if you wish to place the device away from the PC.

The software required for operation is included in the SDK and DDK packages.
The device should only be operated indoors in a dry, dust-free environment, away from moisture, vibrations, heat, cold, and mechanical stress.

Keep away from children, as it is not a toy.
If you encounter issues, refer to the troubleshooting section in the manual.

To restore factory settings, a special command via the USB interface is required.
This action will reset all settings, so proceed with caution.

Package Contents

Quantity Description

1 Homematic IP RF USB Stick

All rights reserved. Translation from the original version in German. This manual may not be reproduced in any format, either in whole or in part, nor may it be duplicated or edited by electronic, mechanical or chemical means, without the written consent of the publisher.

Typographical and printing errors cannot be excluded. However, the information contained in this manual is reviewed regularly and any necessary corrections will be implemented in the next edition. We accept no liability for technical or typographical errors or the consequences thereof.
All trademarks and industrial property rights are acknowledged.

Printed in Hong Kong
Changes may be made without prior notice as a result of technical advances.

140345 Version 1.0 (05/2017)

Information about this manual

Please read this manual carefully before beginning operation with your Homematic IP component.

Keep the manual so you can refer to it at a later date if you need to.
If you hand over the device to other persons for use, please hand over this manual as well.

Symbols used

Attention!

This indicates a hazard.

Please note:

This section contains important additional information.

Hazard information

Do not open the device. It does not contain any parts that can be maintained by the user. In the event of an error, please have the device checked by an expert.
For safety and licensing reasons (CE), unauthorized change and/or modification of the device is not permitted.

The device may only be operated in a dry and dust-free environment and must be protected from the effects of moisture, vibrations, solar or other methods of heat radiation, excessive cold and mechanical loads.
The device is not a toy; do not allow children to play with it. Do not leave packaging material ly-ing around. Plastic films/bags, pieces of polysty-rene, etc. can be dangerous in the hands of a child.

We do not assume any liability for damage to property or personal injury caused by improper use or the failure to observe the hazard informa-tion. In such cases, any claim under warranty is extinguished! For consequential damages, we assume no liability!
Using the device for any purpose other than that described in this operating manual does not fall within the scope of intended use and shall invalidate any warranty or liability.
The device may only be operated within residential buildings.

Function and device overview

The Homematic IP RF USB Stick provides the required radio technology and basic functions of the Homematic IP communication protocol to be able to communicate with other Homematic IP components.
The device is a development tool for Homematic IP software and Homematic IP components and can be used in combination with the Software Development Kit (SDK) and the Device Device Development Kit (DDK). All further information can be found in the documentation of the Homematic IP SDK and DDK.
The RF USB stick is connected via a USB interface.

General system information

This device is part of the Homematic IP smart home system and works with the Homematic IP radio protocol.
All current technical documents and updates are provided at www.eQ-3.de.

Mounting

Connect the RF USB Stick to a USB interface on the PC.
If is not possible to connect the RF USB Stick di-rectly to the USB port of your PC you can use the supplied extension cable. Please do only use the attached USB extension cable if you want to place the device detached from the PC.
The PC detects the RF USB Stick automatically; there is no need to install separate drivers.
The software required for the operation is part of the SDK and DDK.
Please follow the instructions on the screen.

Troubleshooting

Duty cycle

The duty cycle is a legally regulated limit of the transmis-sion time of devices in the 868 MHz range. The aim of this regulation is to safeguard the operation of all devices working in the 868 MHz range.
In the 868 MHz frequency range we use, the maximum transmission time of any device is 1% of an hour (i.e., 36 seconds in an hour). Devices must cease transmission when they reach the 1% limit until this time restriction comes to an end. Homematic IP devices are designed and produced with 100% conformity to this regulation. During normal operation, the duty cycle is not usually reached. However, repeated and radio-intensive teach-in processes mean that it may be reached in isolated instances during start-up or initial installation of a system.

Restore factory settings

The factory settings of the device can be restored. If you do this, you will lose all your settings.
The factory settings of the RF USB stick can be restored with a special command via the USB interface.
In order to transfer the command, the SDK and DDK include appropriate software.

Maintenance and cleaning

The device does not require you to carry out any maintenance.
Enlist the help of an expert to carry out any maintenance or repairs.
Clean the device using a soft, lint-free cloth that is clean and dry.

You may dampen the cloth a little with lukewarm water in order to remove more stubborn marks.
Do not use any detergents containing solvents, as they could corrode the plastic housing and label.

General information about radio operation

Radio transmission is performed on a non-exclusive transmission path, which means that there is a possibility of interference occurring.

Interference can also be caused by switching operations, electrical motors or de-fective electrical devices.
The range of transmission within buildings can differ greatly from that available in the open air.
Besides the transmitting power and the reception characteristics of the receiver, environmental factors such as humidity in the vicinity have an important role to play, as do on-site structural/screening conditions.

Hereby, eQ-3 AG, Maiburger Str. 29, 26789 Leer/Germany, declares that the radio equipment type Homematic IP HMIP-RFUSB is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.eq-3.com

Technical Specifications

Device short description: HMIP-RFUSB

Interface: USB
Radio frequency band: 868.0-868.6 MHz 869.4-869.65 MHz
Maximum radiated power: 10 dBm

Receiver category: SRD category 2
Duty cycle: < 1 % per h/< 10 % per h
Typ. open area RF range: 300 m

Number of devices that can be connected: 100
Power supply: 5 VDC (USB powered)
Degree of protection: IP20

Ambient temperature: 5 to 45 °C
Dimension (W x H x D): 28 x 84 x 11,5 mm (not including plug)
Weight: 18 g

Subject to technical changes

Instructions for disposal

Do not dispose of the device with regular domestic waste! Electronic equipment must be disposed of at local collection points for waste electronic equipment in compliance with the Waste Electrical and Electronic Equipment Directive.

Information about conformity

The CE sign is a free trading sign addressed exclusively to the authorities and does not include any warranty of any properties.
For technical support, please contact your retailer.

Free download of the Homematic IP app!

CONTACT

eQ-3 AG Maiburger Straße 2926789 Leer / GERMANY www.eQ-3.de

FAQ

Q: Can I modify the device for other purposes?
- A: No, any unauthorized modifications invalidate the warranty and may pose safety risks.
Q: Where can I find technical documents and updates?
- A: Visit www.eQ-3.de for all current technical information related to the Homematic IP system.

Documents / Resources

homematic IP HMIP-RF USB Stick [pdf] Instruction Manual
HMIP-RFUSB, 140345 Version 1.0 05-2017, HMIP-RF USB Stick, HMIP-RF, USB Stick, Stick

References

User Manual

homematic IP HMIP-RF USB Stick

Product Information