HOMCOM Height Adjustable Bath Stool Installation Guide

BATH CHAIR

Part List

Place the mainframe ①② on the backside of the seat board ③ and secure it with the screw ⑤ and washer ⑥ as showed.

Install the foot tube ④ with the mainframe ①② till the marble is secured and adjust the same height desired .

SUBSEQUENT CONSULTATION: READ CAREFULLY

Warning:
*Put the chair stably on a flat floor.
*Building the chairs in good condition.
*Stay away from open flames.
*Avoid the overload at the chair.

Precautions before assembly:
*Prepare a clean and dry mounting area.
*Verify that the product is not damaged.
*Check that none of the pieces are missing.

Maintenance:
*Clean with a soft fabric.
*Regularly remove leaves and / or water collected on the canvas.
*Check the seating regularly.

Storage conditions:
*The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Caution with the risks of pinching or cuts during assembly.
The manufacturer declines all responsibility in case of damages due to a bad installation.
Weight limited