IN240701681V01_GL
712-068V00
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
712-068V00 Upright Walker Rollator
Technical Data
| Max. user weight | 108kg | Handle height(S regulations) | 90-102 cm |
| Total weight approx. | 6.9kg | Tray (width x depth) | 39.5*27.5 cm |
| Max. bag load | 5kg | Tray height | 70.5cm |
| Length/Overall depth | 64.5cm | Front wheels | 8inches |
| Width (open) | 56cm | Rear wheels (diameter x width) | 8inches |
| Material of frame | Aluminum | Material of wheels | PVC |
Product Overview
- Handle
- Brake handle
- Parking brake lock
- Brake cable
- Height adjustment button
- Tray
- Basket
- Folding button
- Knob screw
- Front wheel
- Rear wheel
- Knob screw
- Brake adjustment
- Velcro tape for brake cable
- Brake shoe
Assembly Instructions
- Remove the rollator from the packaging and remove the protective foils.
- Place the main body on the floor as shown.
- Remove the knob screws(9) on the front wheel.
- Insert the front wheel into the frame.
- Secure the front wheel using the previ ously loosened knob screw with its black side facing inward.
- Repeat for the other front wheel. Make sure the black side of the knob screws are on the inside.
- Flip the product over as shown.
- Place the rear wheels with the handle as shown.
- Insert the rear wheel axle into the frame.
- Please note that the wheels are on the outside.
- Fasten the rear wheel axle with the previously loosened knob screw (12).
- Repeat for the other rear wheel.
- Make sure the rear wheels are on the outside.
- Put the rollator upright to unfold, using one hand on the handle and anoth er pressing the tray. Ensure it’s fully open by listening for a “click” indicating it’s locked.
- Open the red height adjustment button(5) on both sides of the frame.
- Insert the handles into t e rame and close the red height adjustment button (5) so that both sides are at the same height.
- Our recommendation: Fix the brake cables on both sides of the frame using the velcro tape{l4) as shown.
- Place the tray(6) on the frame.
Operation Instructions
1. Folding
- Remove the tray (6). Then activate the parking brake lock(3).
- Fold the basket by pulling the white lever toward your body.
- The basket is folded as shown.
- Grasp the rollator by the handle (1) and tilt it in your direction so that it stands on the rear wheels (11).
- Push the Folding button(8) so that the rollator folds up. If the rollator does not fold automatically, tilt it more.
- The rollator is folded as shown
2. Height Adjustment
Loosen the height adjustment button(S) and adjust the handle to the appropriate height. Repeat for the other side, and Retighten the height adjustment button{S). Make sure that both handles are set to the same height.
The handle height can be adjusted from 90 to 102cm.
Check that the handle is locked in a secure position.
3. Brake System
- To apply the handbrake pull the brake lever up.
- Push the brake handle upwards and fix it with the parking brake lock to lock the rear wheels.To release the parking brake, push the brake handle up slightly and pull the parking brake lock forward.
• Brake Adiustment
Step 1: Use one hand to press the iron piece under the spring upward.
Step 2: Turn the nut clockwise to increase braking force; Turn the nut counterclockwise to decrease braking force.
If you have any questions, please contact our customer care center, Our contact details are below:
oo1-s77-644-936e
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
If you have any questions, please contact our customer care center, Our contact details are below:
oo44-800-240-4004
endures@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
Documents / Resources
 |
HOMCOM 712-068V00 Upright Walker Rollator [pdf] Instruction Manual 712-068V00 Upright Walker Rollator, 712-068V00, Upright Walker Rollator, Walker Rollator, Rollator |