Hoide Battery Powered LED Table Lamp
OPERATING INSTRUCTIONS
Touch the switch button to turn on/off the light and switch three light source modes (warm white light, warm light, white light). Long press this switch button to adjust the brightness when the light is on.
If the product is not functioning, please try charging the product first
BATTERY CHARGE
Connect the USB to the charge port on the base of the lamp and plug the opposite side in the power outlet. Abule light in lhe USB outlet indicates the charging process. Charge the battery for over 4 hours to reach the optimal level of charge. The green light in the USB outlet tums on when the lamp is fully charged A full charged battery supports about 8 hours of continuous usage. To ensure the optimal performance of the battery. we suggest it to be discharged and recharged completely for the first 10 cycles. Charge t he battery as soon as possible after it gets empty, the battery life will be suffer if it is left empty for a long period.
ATTENTION
When the light is low, please don’t charge while using, that can protect the battery, please charge once a month at least. The battery of this lamp is non-replaceable, when the battery life is reached, the table lamp will not be able to use.
Documents / Resources
 |
Hoide Battery Powered LED Table Lamp [pdf] User Manual 285, 105, V2.0, Battery Powered LED Table Lamp, Powered LED Table Lamp, LED Table Lamp, Table Lamp |