HSB-NSA-6 RAI-LED Remote Alarm Indicator
“
RAI-LED Remote Alarm Indicator
Specifications
ELECTRICAL
- Supply Voltage: 17 – 41 VDC
- Current Consumption: 7mA (Alarm), maximum
ENVIRONMENT
- Location: Indoor
- Operating Temperature: Not specified
- Storage Temperature: Not specified
- Relative Humidity: Not specified
Dimensions: Not specified
Mounting: UL Listed single gang electrical
box
Product Usage Instructions
Application
The RAI-LED is designed to provide visual alarm indication for
conventional detectors and digital analog addressable sensors
installed in concealed locations or where the sensor’s alarm
indicator is not visible to responding personnel.
Installation
- Mount the RAI-LED to a UL Listed single gang electrical
box. - Ensure proper wiring connections as per the product
manual. - Connect the RAI-LED to compatible bases and sensors/detectors
listed in the manual.
Operation
Once installed, the RAI-LED will provide visual alarm indication
when connected detectors/sensors are triggered. Refer to the
product manual for troubleshooting and maintenance guidelines.
FAQ
Q: What should I do if the RAI-LED does not light up during an
alarm?
A: Check the wiring connections and ensure the supply voltage is
within the specified range. If issues persist, contact technical
support for assistance.
Q: Can the RAI-LED be used outdoors?
A: The RAI-LED is designed for indoor use only. Avoid exposing
it to outdoor conditions to prevent damage.
“`
RAI-LED Remote Alarm Indicator
APPLICATION
RAI-LED is a remote alarm indicator that provides visual alarm indication for conventional detectors and digital analog addressable sensors that are installed in concealed locations or where the sensor’s alarm indicator is not visible to responding personnel. RAI-LED is intended to be mounted to a UL Listed single gang electrical box.
STANDARD FEATURES
· Compatible with Conventional Detectors and Bases.
· Compatible with Digital Analog Addressable Sensors and Bases
· Low Current Consumption
· Compatible with Hochiki Conventional and Analog Addressable Control Panels
SPECIFICATIONS ELECTRICAL Supply Voltage Current Consumption ENVIRONMENT Location Operating Temperature Storage Temperature Relative Humidity Dimensions Mounting COMPATIBILITY Compatible Bases
Compatible Sensors and Detectors
17 – 41 VDC 7mA (Alarm), maximum
For Dry Indoor Use Only 32°F (0°C) ~ 120°F (49°C) -22°F (-30°C) ~ 158°F (70°C) 90% RH Non-Condensing 2.73″W x 4.5″H x 0.15″D Single gang electrical box
HSB-NSA-6, YBN-NSA-4, ASB, SCI-B6, SCI-B6, NS4-220, NS4-221, NS4-224, NS4-100, NS6-220, NS6-221, NS6-224, NS6-100 AIE-EA, ALG-V, ALK-V, ALN-V, ATG-EA, ATJ-EA, ACA-V, ACC-V, ACD-V SOC-24V, SOC-24VN, DCD-135, DCD-190
Hochiki America Corporation 7051 Village Drive, Suite 100 Buena Park, CA 90621-2268 Phone: 714/522-2246 Technical Support: 714-670-3229 or technicalsupport@hochiki.com
Find latest revision at www.hochiki.com
F0178 04/2025
Documents / Resources
 |
HOCHIKI HSB-NSA-6 RAI-LED Remote Alarm Indicator [pdf] Owner's Manual HSB-NSA-6 RAI-LED, HSB-NSA-6 RAI-LED Remote Alarm Indicator, Remote Alarm Indicator, Alarm Indicator, Indicator |