Hobolite CONTROL02 Remote Control
Operation introduction
- Battery 3.7V 180mAh
- Dimension 86x38x18mm
- Net Weight 45g
WARNINGS
- Please thoroughly read the manual prior to operating the product and operate in strict accordance with the manual.
- Don’t disassemble the product by yourself. If the product requires repair, contact our maintenance personnel.
- Product failures caused by unauthorized disassembly are not covered by warranty, and will be chargeable.
- Don’t submerge the product in water or other liquid/s to avoid safety risk and product failure.
- Only use the originally supplied accessories to avoid product failure/s.
App Download
You can download the Hobolite app in the Apple App Store and Google Play Store by scanning the following QR code.
Warranty Card
- Product No.
- Product name
- Purchase date
- User name
- User telephone
- User address
- Dealer stamp
AEC LIGHTING SOLUTIONS CO., LTD. QUALIFIED: PASS Add: 2548 Bao’an Highway, Jiading District, Shanghai 201801, China
Specifications
- Battery: 3.7V 180mAh
- Dimension: 86x38x18mm
- Net Weight: 45g
Product Information
The product is a dimmable light source controller that allows users to adjust parameters such as color temperature (CCT), hue, saturation, and intensity (HSI) of the lighting. It features multiple keys for power control, dimming adjustments, and menu navigation.
Product Usage Instructions
Power On/Off and Dimming
To power on/off the device and access the dimming settings:
- Short-press KEY1: Powers the device on/off and enters the dimming page.
- Short-press KEY3: Enters the dimming page. Press on the dimming page to switch between different light sources if available.
Menu Navigation and Parameter Adjustment
In the power-off state:
- Short-press KEY2: Enters the menu page. Short press on CCT page: Switches between luminous flux (lm) and color temperature (CCT) parameters.
- Scroll the knob: Adjusts the current parameters.
Main Dimming Pages
In the power-on state
- Long-press KEY1: Switches to the CCT/HSI main page for colored light adjustments.
- Long-press KEY2: Switches to the HSI main page for hue, saturation, and intensity adjustments.
AEC LIGHTING SOLUTIONS CO., LTD. Add: 2548 Bao’an Highway, Jiading District, Shanghai 201801, China Tel: 86-021-69153369
FCC warning statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirements.
FAQs
What should I do if the device does not respond to key presses?
If there is no response to key presses for more than 1 After a minute, the device will auto power off. Simply power it back on to resume operation.
How can I adjust the dimming parameters precisely?
Use the knob to scroll and adjust the current parameters for precise dimming control.
Documents / Resources
 |
Hobolite CONTROL02 Remote Control [pdf] Instruction Manual CONTROL02 Remote Control, CONTROL02, Remote Control, Control |