HN MOTION 3DOF Motion Actuator Kit
Disclaimer
By using the HN Motion Kit, you acknowledge and agree to the following terms:
- Age Requirement:
You must be at least 18 years of age to use this product. By operating this machine, you confirm that you meet this requirement. - Assumption of Risk:
The HN Motion Kit is a powerful piece of machinery. You use it at your own risk. Always ensure that you follow all safety protocols to minimize the risk of injury, damage, or malfunction. - Skill and Knowledge:
Installation and operation of this product require a certain level of technical skill and expertise. It is your responsibility to ensure that you have the necessary knowledge to install, operate, and maintain the The HN Motion Kit safely. If you are unsure, seek assistance from a qualified professional. - Secure Environment:
Always use the HN Motion Kit in a safe and controlled environment, free of hazards, to reduce the risk of accidents. Ensure that the machine is placed on a stable surface and that all safety precautions are in place. - Supervision:
The system should never be left unattended during operation. Always supervise the machine while it is in use. - Safety Practices:
Adhere strictly to all safety guidelines provided in the user manual and any additional safety notices. Never bypass safety features or attempt to modify the machine.
By continuing with the setup and use of the HN Motion kit, you confirm that you understand and accept these terms.
Components
Installation
Connection Diagram
- A Power Cable
- B Motor Cable
- C Encoder Cable
- D DB25 Cable
- E Power Cable
Settings for Servo Controller
- PN008 = 100
- PN009 = -100
- PN024 = 100
- PN051 = 3000
- PN052 = 1
- PN060 = 2
- PN061 = 6
- PN097 = 1
- PN098 = 20
- PN109 = 1
- PN110 = 30
- PN113 = 20
- PN114 = 10
- PN115 = 100
Documents / Resources
 |
HN MOTION 3DOF Motion Actuator Kit [pdf] Owner's Manual 3DOF Motion Actuator Kit, 3DOF, Motion Actuator Kit, Actuator Kit, Kit |